How to Repair a Laptop by yourself
TABLE OF CONTENTS
BEFORE WE BEGIN TROUBLESHOOTING 5
LAPTOP BASICS 7
WHAT’S MY LAPTOP WORTH? 18
SHOPPING FOR USED LAPTOPS 19
SHOPPING FOR NEW LAPTOPS 22
LAPTOP UPGRADES 26
THINGS THAT GO WRONG WITH LAPTOPS 29
BASIC REPAIR TECHNIQUES 34
SEARCHING FOR ANSWERS 39
TROUBLESHOOTING POWER PROBLEMS 43
TROUBLESHOOTING BATTERY PROBLEMS 47
LAPTOP VIDEO TROUBLESHOOTING 50
TROUBLESHOOTING LAPTOP OVERHEATING 55
TROUBLESHOOTING LAPTOP HARD DRIVES 57
TROUBLESHOOTING WIRELESS CONNECTIVITY 61
TROUBLESHOOTING MOTHERBOARD, CPU AND MEMORY 64
TROUBLESHOOTING LAPTOP DIAL-UP MODEMS 67
TROUBLESHOOTING DVD/CD PLAYBACK AND RECORD 70
iv
TROUBLESHOOTING LAPTOP SOUND 75
WIRED NETWORK TROUBLESHOOTING 77
TROUBLESHOOTING KEYBOARD, POINTER AND USB 79
POWER FLOWCHART 83
BATTERY FLOWCHART 93
DISPLAY FLOWCHART 103
OVERHEATING FLOWCHART 113
DRIVE FLOWCHART 123
WIRELESS FLOWCHART 131
MOTHERBOARD, CPU AND RAM FLOWCHART 141
MODEM FLOWCHART 151
DVD/CD FLOWCHART 159
SOUND FLOWCHART 167
WIRED LAN FLOWCHART 175
KEYBOARD, POINTER AND USB FLOWCHART 183
The Laptop Repair Workbook
5
Before We Begin Troubleshooting
The author of this book is the proud owner of a 1986 Dodge
Omni that was purchased new and has never been taken to a
garage for repairs. But laptops aren’t cars and they are rarely as
cost effective to repair as desktop PC’s. A twenty or forty year
old car in good operating condition is just as serviceable as a
new car and may even get better gas mileage. But a ten year old
laptop isn’t going to run the latest Microsoft operating system or
even the previous version. Computers are no better than the
software they can run. You’re going to need an up-to-date
operating system if you are a mainstream user who wants to run
the same software you use in work or the current year tax
program. A laptop computer that cost as much as a new small
car in the 1980’s isn’t worth a gallon of gas today. Think of
computers as software appliances. Unfortunately, laptop
computers are among the shortest lived appliances found in the
American household today.
If you make an appointment with a doctor for a health
issue, the first thing you might expect to hear is, “So, what seems
to be the problem today?” This is the most important part of the
diagnostics process for a good physician, listening to the patient
describe the symptoms and asking some follow-up questions to
probe deeper. The patient who responds, “I don’t know what’s
wrong with me” might get a blood test or a psychiatric battery
but is unlikely to walk out of the office with a cure. When it
comes to diagnosing your laptop problems, the laptop is the
patient and you are the physician. The laptop usually can’t
describe its symptoms, so you have to be a keen observer of
laptop behavior if you want to nail the problem your first time
out.
Some health issues, like puncture wounds and broken
limbs, manifest themselves in an obvious manner so there’s no
difficulty with the doctor or patient diagnosing the problem. The
same is true if you’ve broken the hinges off your laptop, if the
battery burst into flames or if you knocked your orange juice
over the keyboard and it stopped working. The solutions are
generally both obvious and expensive, and since laptops aren’t
family members, replacement is often the most sensible
solution. But the majority of laptop symptoms, at least at first
Before We Start Troubleshooting
6
blush, may be attributed to any number of different problems.
And, just as human beings have pre-conceptions and neuroses
clouding the diagnostic picture, laptops have software issues
that pose as hardware malfunctions. In extreme cases, laptop
technicians will talk the owner into the “Nuke and Pave”
approach, using the manufacturer supplied software to restore
the laptop to its factory fresh condition to see if that solves the
problem. Sometimes this makes more sense than letting a
technician spend several hours (and several hundred dollars of
your money) trying to solve a suspected software problem. But
you can do this just as easily at home.
This book can’t make you into a professional computer
technician. It will help you troubleshoot your laptop problem
and take the most cost effective approach to repairing it, getting
it repaired, or replacing it. But the troubleshooting process
depends on your observations of the symptoms and your
willingness to keep your mind open to solutions other than your
first impression, or those suggested by friends who say they had
“exactly the same problem.” If the laptop is still usable but acts
up, pay close attention to when and where it acts up, whether
the problem always occurs after the laptop has been moved, or
shut-down for the night, or running all day. Even the weather
plays a part in troubleshooting some problems, so try to read
through all of the general troubleshooting sections, just to get a
feel for the things that go wrong with different components. If it
doesn’t make you into a laptop hypochondriac, it will make you
a stronger diagnostician.
You may notice we don’t talk about the razzle-dazzle
technology of computer components in this book. The reason is
simple. You can’t upgrade or repair your laptop by using the
latest technology available, nor can you save money by repairing
it with older technology rescued from a random laptop at the
recycling center. You have to use the exact parts your laptop was
engineered to work with. Hard drives and memory are the only
replaceable parts that are often compatible between models of a
similar vintage. For some readers, the lack of an illustrated
discussion on how hard drives store data bits will take some fun
out of the book, but that knowledge can’t help you when it
comes to troubleshooting. There are plenty of books with
beautiful color illustrations that try to explain basic computer
Information about
the book:
workbook.htm
The Laptop Repair Workbook
7
technology, but they do so at the expense of helping you solve
real laptop problems.
Two final notes about using this workbook. First, if your
laptop is in warranty, it doesn’t make any sense to take it apart
in hopes of fixing something yourself. This book can still help
you troubleshoot the problem to determine if it’s a software
setting or incorrect use, which may save you sending the laptop
out for repair. Second, feel free to cut out the twelve flowcharts
in the second half of the book and staple them together. This will
save on page flipping as you read the expanded explanations of
the decision symbols. It’s a workbook, not English literature.
Laptop Basics
If you’re already familiar with computer terminology, laptop
components and values, you can skip to the general
troubleshooting section. The discussion here will be strictly
limited to describing the function of basic laptop components
and the acronyms used to describe them. You don’t need to
remember what individual words the acronyms represent
anymore than you need to remember that FBI stands for Federal
Bureau of Investigation if they’re knocking at your door.
Acronyms are only a tool for describing certain computer
components and functions, so think of them as labels and don’t
get caught up in the alphabet soup.
Operating System (OS)
We’re confident that readers are familiar with the term
operating system, but the acronym OS may only be widely
recognized by Apple iBook and PowerBook users, since Apple
operating systems have long been branded with “OS” and the
version number. We always use “OS” on the flowcharts in order
to fit operating system related decisions into the flowchart
symbols, so it’s the most critical acronym in this troubleshooting
book. Also, when we refer to operating systems in this book, we
refer to Microsoft Windows components and tools, since it’s far
and away the most widely used OS on laptops. There are
excellent help groups online specific to Apple OS releases and
Linux, especially the Ubuntu release which is gaining popularity
as an alternative laptop operating system. The hardware
Before We Start Troubleshooting
8
troubleshooting procedures are as generic as we can make them
in the absence of a “standard laptop,” since no such thing exists.
Basic Input Output System (BIOS)
You may already be familiar with the separate roles played by
hardware and software in computing. The hardware can be
viewed as the body of the laptop, including the brain. The
software can be viewed as the mind that controls the hardware
in response to your requests. Sitting between the individual
hardware components and the OS software that you use (most
likely a version of Microsoft Windows) is a small chunk of
hardware-specific software that allows the two to communicate.
This software is known as the BIOS (Basic Input/Output
System) and it is stored in nonvolatile memory on the main
circuit board, or motherboard, of the laptop.
The BIOS is the first software loaded into regular
memory (RAM) when the laptop is powered on. The BIOS
contains sufficient instructions to operate the screen in a basic
mode, to accept input from the keyboard, to read from the hard
drive and the DVD/CD drive, and to detect attached network
and USB devices. The latter is necessary because some laptops
in corporate or government settings are configured to boot (to
start loading the operating system) from a network or external
drive for security reasons.
The memory chip on which the BIOS software is stored is
a type of EEPROM (Electronically Erasable Programmable Read
Only Memory) known as Flash Memory. Using software
downloaded from the website of the laptop manufacturer to
upgrade the BIOS to a new version is called “flashing.” In many
instances, if you call tech support with a problem, they’ll ask a
few questions and then suggest that you flash your BIOS with
the latest version. Unfortunately, this standard procedure can
turn your laptop into a useless paperweight if something goes
wrong, like a power interruption or accidentally downloading
the wrong BIOS for your model. The process isn’t reversible
without special equipment to reprogram the EEPROM. You only
get the one chance.
We never recommend flashing a laptop BIOS unless you
have specific information from web research that it is the exact
The Laptop Repair Workbook
9
and only cure to the problem you are trying to solve. It should
never be necessary to flash the BIOS in order to recover some
lost functionality. There are three common scenarios which may
require you to flash the BIOS. The first scenario is if you are
installing a specific software or operating system application
that has a known problem with the original BIOS and for which
a fix has been introduced. Laptop manufacturers often
concentrate their efforts on getting Microsoft Windows right
and only correct problems with Linux and other alternative
operating systems at the BIOS level when reported by user
groups. A new or upgraded version of Windows may also require
a BIOS upgrade. The second scenario is an ACPI (Advanced
Configuration and Power Interface) issue that may manifest in
charging problems, fan management, or trouble with on/off,
sleep or hibernation. Modern operating systems take charge of
all of these functions from the BIOS soon after the laptop boots,
but again, don’t try flashing the BIOS when troubleshooting a
power problem unless you have specific information that it must
be the solution. The third scenario is if you choose to upgrade
an internal hardware component with a part that wasn’t
supported by the original BIOS, such as a faster CPU or a Blu-
Ray optical drive, you may find evidence that it will only work if
you flash the BIOS with the latest version.
CMOS Setup
Another term that we’re forced to use in this book is CMOS
Setup. The CMOS acronym stands for Complementary Metal
Oxide Semiconductor, the type of memory chip used to hold the
user modifiable hardware settings. The CMOS Setup program is
part of the BIOS and can be accessed before the operating
system loads. Some manufacturers allow for CMOS settings to
be altered through the operating system as well, through a
hardware setup icon in Windows Control Panel, but the setting
won’t take effect until the next time the laptop is rebooted. After
this brief description, we’ll try not to mention CMOS Setup
unless you need to access it for troubleshooting purposes.
It’s entirely possible to purchase a laptop new and own it
for years without ever knowing or caring that CMOS Setup
exists. The most common reason the average user will ever have
to enter CMOS Setup is to set a BIOS level password for the
laptop, one that is required before the operating system will
Before We Start Troubleshooting
10
even try to boot. If your laptop comes equipped with a finger
print scanner or other hardware based security, it’s likely that
the failsafe password is created and stored in CMOS Setup.
Since the vast majority of laptops are sold with the operating
system installed, the CMOS settings are preset to work with the
operating system. However, if you wipe out the current
operating system, or attempt to set up a dual boot system with
Linux or another operating system version, you may have to
change some CMOS settings. Many troubleshooting scenarios
will require a CMOS Setup option that appears in the main
menu under a title similar to “Restore BIOS Defaults” or
“Restore Safe Settings”. This option will restore all of the
settings in CMOS Setup to the factory defaults, which can cure
many problems if they’ve been corrupted or accidentally
changed.
CMOS Setup is normally accessed before the operating
system boots, using a key combination that is often displayed on
the screen by the BIOS during the power on phase. Common
access methods are hitting DEL key, ESC key or the F1 or F2 key
immediately after you power on. Some laptops suppress the
BIOS generated message in order to minimize user errors, but
you can always go online and Google the right key combination
if it's not in your manual. Note that the terms “BIOS” and
“CMOS Setup” are often used interchangeably online when
you’re searching for the key combination.
Drivers and Device Manager
There are two types of drivers in laptops, hardware and
software. The focus here will be on the software device drivers as
the other type of drivers are board-level integrated circuits that
aren’t user replaceable if they fail. Software drivers, which we’ll
refer to as device drivers from here on, are the bits of
programming that allow the operating system and other
software applications to communicate with and control the
hardware in your laptop. Since laptops are sold as whole
functioning computers, rather than as expandable kits, all of the
device drivers the laptop needs to function will be preinstalled.
However, if you purchase an expansion card or add any external
devices other than a few very standard components, such as a
keyboard, mouse or memory stick, the laptop will require a
device driver to work with it properly.
The Laptop Repair Workbook
11
If the new device is widely used and has been around for
a while, it’s possible that the operating system will include a preloaded
driver for the device, which it will find and install on its
own when the device is connected. But in most cases, any device
or peripherals you purchase, such as printers, cameras, USB
speakers or broadband modems, will come with their own driver
disc and specific instructions for how to install them.
Frequently, the instructions will require that you install the
software before hooking up the device for the first time. This is
to make sure that your operating system doesn’t try to install a
seemingly compatible device driver for the hardware before the
proper device driver is made available.
The drivers can be manually checked for problems and
updated or disabled in the Device Manager view, which is found
through Control Panel. The appearance of the Device Manager
view and the way it reports potential problems varies between
Windows versions, and in more recent versions it’s a tab under
the Hardware category behind the System icon in Control Panel.
In all versions it will quickly give you three critical pieces of
information about the status of your attached or installed
devices. First, if it doesn’t show up in Device Manager at all and
no unidentified devices are shown, Windows doesn’t know it’s
there, which means it’s a hardware troubleshooting job. If the
device doesn’t work, but Device Manager shows it and indicates
that it needs a driver, you haven’t got the proper software driver
installed. Finally, if it shows up with the right driver but
Windows displays a specific error, like the hardware isn’t
responding, you need to troubleshoot that error.
Motherboard
Laptops are very close to being single board computers, where
that single board is most commonly called the motherboard.
Any additional circuit boards in the laptop that connect to the
motherboard are known as daughter cards, so it’s clear who won
the computing gender wars. Unlike desktop PCs, where
motherboards can be easily and inexpensively replaced in all but
the most unfriendly systems, laptop motherboards are
proprietary. The only replacement motherboard that will
physically fit into your laptop is a motherboard of the same
brand and model family.
Before We Start Troubleshooting
12
If the motherboard fails and the laptop is out of warranty,
it will rarely make sense to repair it. A new motherboard
ordered from the manufacturer usually costs more than a new
laptop purchased in chain store. If you’re very happy with the
laptop, except for the motherboard being dead, you might look
for a used replacement part on eBay. If the failure is with a
simple connector, like the power jack with its limited solder
connections, it may make sense to repair the board yourself or
to send it out. Just make sure you remove the hard drive before
sending your laptop to some cheap power jack repair place you
find online.
Central Processing Unit (CPU)
The brain of any computer is the CPU (Central Processing Unit).
This is a single, large silicon chip which is usually manufactured
by Intel or AMD. It can be replaced as long as it is socketed,
rather than soldered to the motherboard. Total CPU failures are
relatively rare, but the CPU may misbehave or shut itself down if
it gets too hot. It’s fairly common for desktop PC hobbyists to
upgrade their CPU with a faster model when the prices come
down but it’s rarely practical or possible with laptops. Unless the
laptop motherboard was designed to support the faster CPU, it
won’t work at all. If you are able to find a faster CPU that will
work in the laptop, it’s unlikely to offer a performance difference
that you can notice in normal usage.
Modern CPU speeds are measured in GHz (Gigahertz), or
billions of cycles per second. If you own an older laptop, the
CPU speed might be measured in hundreds of MHz
(Megahertz), which expresses millions of cycles per second.
CPU speeds used to increase rapidly from year to year and offer
a reasonable estimate for system performance. Unfortunately,
the CPU manufacturers hit the wall a couple years ago in terms
of upping the clock speed, so performance gains are now
achieved by cramming multiple brains into a single CPU. How
much additional speed you see from employing multiple brains
depends very much on the software you are using and the tasks
you are working at. If your main applications are web surfing
and e-mail, the speed and power of the CPU are nearly
irrelevant. If you are editing video or recalculating spreadsheets
with thousands of columns, CPU performance can turn a five
Surface mount vs
socketed CPU
laptop19.htm
The Laptop Repair Workbook
13
minute rendering task into a two minute render, or a 20 second
calculation into a 5 second calculation.
Your laptop may contain multiple heatsinks, which are
finned metal structures that help conduct the heat away from
hard working silicon components. The heatsinks installed on the
CPU and the video processor are often active heat sinks,
meaning that there’s a little fan bolted right to the top of the
heatsink to help cool it. This is a key reason to rethink upgrading
your laptop CPU even if it turns out there’s one available for the
motherboard. The faster CPU will likely generate more heat, and
the laptop may not be designed to cool it. If a heatsink fan fails
or is unable to provide sufficient cooling, the laptop will display
overheating symptoms, like random freezes or shutdowns.
Random Access Memory (RAM)
The memory in your laptop is, by definition, the RAM (Random
Access Memory). It’s worth making a point of this because even
some long time computer users confuse memory with storage,
which leads them to ask the wrong questions at stores and
purchase hardware they don’t need. When computer
professionals and salespeople talk about storage, they are
talking about devices that save data when the power is turned
off. This can include hard drives, magnetic tapes, optical discs
such as CD, DVD and Blu-Ray, even the old floppy disks. What
makes it more confusing is that the Flash memory technology
mentioned in our brief BIOS discussion is a form of permanent
storage used by digital cameras, cell phones, and portable USB
storage devices. But the main memory in your laptop is the
super fast RAM that forgets everything when the power is
turned off.
Memory in modern laptops is measured in hundreds of
megabytes (MB) or a couple gigabytes (GB). The standard
Windows operating system can’t work with more than 4.0 GB of
RAM, and the minimum suggested for running Microsoft Vista
is 1.0 GB, so the overall range today is extremely narrow and
memory is getting cheaper all the time. In general, the only
laptop upgrade we recommend is the memory, but only if you’re
starting from a low amount. Most laptop motherboards only
have room for two RAM modules, the little circuit cards that
carry the individual RAM chips. We could feed you a lot more
SODIMM RAM in
laptop:
laptop18.htm
Before We Start Troubleshooting
14
acronyms referring to different types of module technologies
and speeds, but all you need to know is that you can only install
the RAM that is specifically supported by your motherboard.
Hard Drive
The primary storage device in your laptop is the hard drive.
Modern hard drive capacities are measured in hundreds of
gigabytes, though just a couple years ago, they were limited to
tens of gigabytes. It’s enough space unless you load up on video,
audio or pictures. If you do run out of space, clean up your
existing hard drive by copying most of the junk onto DVD’s or
an external hard drive. It will be much easier than to upgrade
the existing hard drive to a higher capacity and reinstalling all
the software. It’s usually possible to upgrade the hard drive with
a higher capacity model, but the only practical method is to use
special software to image your existing hard drive onto the
replacement drive in an external USB enclosure, and then swap
the drives.
Solid-state hard drives are now available in some highend
laptops and will slowly trickle down into consumer models
over the coming years. Since solid-state drives have no moving
parts, they should prove more reliable, will be more tolerant of
physical shocks, and will use less power. But no technology is
perfect, and it’s probable that solid-state drives will prove
vulnerable to certain hardware failures, such as electrical
shocks. Unlike standard hard drives, when a solid-state hard
drive fails, it’s unlikely any data recovery will be possible.
DVD/CD Burners
Everybody has long known DVD and CD discs from home
entertainment, but it’s only in the past couple years that DVD
recorders became standard items in laptops. The DVD recorder
software will come with an option for recording data, which is a
great way to create permanent back-ups of your important files.
Most laptops also ship with a utility that allows you to create
emergency restore discs, if they don’t provide you with a factory
recovery disc. The restore discs are a set of DVD’s that record a
perfect image of the hard drive and allow you to restore the
laptop to its factory fresh condition should the hard drive fail or
Inside a 2.5” hard
drive:
laptop17.htm
The Laptop Repair Workbook
15
the operating system get hopelessly corrupted by viruses and
malware.
The majority of complaints about DVD recorders are
about their playback, not the recording. Many users use the
DVD exclusively for playing movies, but the evolving copy
protection schemes and encoding used by the various movie
studios complicates the issue. Sometimes, a laptop will be able
to play old movies, but not new ones. Other times, only movies
from a certain studio will fail. It’s even possible for an
automated software update to result in a loss of capability,
where a movie that played yesterday won’t play today.
Liquid Crystal Display (LCD)
The LCD (Liquid Crystal Display) was the display technology
breakthrough that made laptop computers possible. Before
LCDs, there were some portable computers known as
“luggables” that employed a small tube display that took up half
the room and power. LCD screens are lightweight, consume
minimal power, and unlike the old-fashioned tube displays, are
well suited to getting bounced around. The LCD panel itself acts
as a sort of electronic color film, but the images it produces are
nearly invisible to the eye. If you remember the old 35 mm slides
that used to be popular in photography, you’ll remember how
hard it was to make out the picture without a slide projector or a
light table.
The light source that turns the LCD “film” into a bright
display is called the “backlight.” The current generation of
laptops employ a special type of fluorescent light, a CCFL (Cold
Cathode Fluorescent Lamp) tube, which provides a bright white
light that is evenly distributed behind the LCD screen by
reflective surfaces. The CCFL tubes are very thin and relatively
long lived, but they require a special power source to light them.
This power is provided by the inverter, a circuit that transforms
the low voltage DC power your laptop runs on into a high
voltage, high frequency electronic signal. Inverters are the
Achilles heel of laptop display systems. If the LCD only displays
the faintest of images, it means the backlight isn’t lit. Inverter or
wiring failure is more common than actual backlight burn-out.
Taking apart a
laptop screen:
laptop_4.htm
Showing inverter
and backlight
laptop_5.htm
Before We Start Troubleshooting
16
Laptop Batteries
It’s worth mentioning battery technology in laptop basics just to
point out that laptops contain more than one battery. The
battery everybody knows is the main battery which is easily
removed from the laptop, costs around $100 to replace, and can
power the laptop for a few hours when fully charged. All laptops
also contain a small battery, similar to the batteries that power
wrist watches, to maintain the time, date and the CMOS
Settings. In addition some laptop models employ a nonremovable
battery for backing up the contents of main memory
when the laptop is switched into hibernation. Higher end laptop
models with a hot-swap bay offer the option of a second main
battery for extended operating life, at the expense of removing
the DVD drive or second hard drive.
Universal Serial Bus (USB)
Many years ago, laptops and PCs sported special connection
ports for printers and slower external devices like dial-up
modems. These ports have long since been replaced by USB
(Universal Serial Bus) ports. Most laptops feature at least two or
three USB ports, and on newer laptops, these are all the highspeed
USB 2.0 and soon to be 3.0 variety. The USB ports on
your laptop are even more valuable than the USB ports on your
PC because they save you from expensive and impractical
repairs by serving as a bypass for failed laptop hardware. The
only downside of replacing failed laptop components (such as
the keyboard, touch pad, DVD, modem, network and sound
adapters) with external USB devices is that they slowly turn your
portable laptop into a stationary desktop. But when your laptop
is a couple years old and you are faced with a multi-hundred
dollar repair that you might not be up to doing yourself, the
ability to plug in an inexpensive USB device is a lifesaver.
PC Cards
Unlike standard PCs, most laptops aren’t designed to accept any
internal expansion cards. Those laptops that do employ a mini-
PCI slot are usually sold with that slot already filled by some
standard option. With the advent of USB 2.0, this has become
less important, but you may want to add functionality to your
laptop that requires more power or speed than USB provides.
The Laptop Repair Workbook
17
This option is available through the one or two external
expansion slots on your laptop known by the unfortunate name
“PC cards”. The earlier version, which you may see in a handme-
down laptop, were called PCMCIA cards, which is too long
an acronym to break out here. OK, it stands for People Can’t
Memorize Computer Industry Acronyms. The current standard
in most laptops is Type II PC Cards, and they are primarily used
for plugging in cellular modems, which allow your laptop to
communicate at a modest speed over the cellular phone
network, for a steep price. The latest generation of laptop
expansion cards are called “Express Cards” but they have seen
limited adoption so far.
Wireless Technology
Since we just mentioned cellular modems, it’s a good time to
bring up the wireless technology, WiFi. WiFi networking for
computers is distinct from the cellular phone network; WiFi and
cellular simply refer to different wireless technologies. WiFi
networking is strictly a short distance solution. Current
standards support ranges from a few tens of feet up to a few
hundreds of feet, depending on the generation of wireless
equipment used. The most common WiFi implementation used
in laptops today is the “G” standard, which is generally
backwards compatible with the older “B” standard. That means
a laptop with built-in B/G will be able to operate on either type
of network. The most recent release to achieve popularity is the
“N” standard, and the newest laptops and after-market adapters
support wireless B/G/N. While “WiFi” and “wireless” may be
used interchangeably by computer professionals, “wireless” is
rarely used when referring to cellular communications.
Bluetooth
Bluetooth adds another communications dimension to laptops,
though it’s not commonly used for local connections despite its
wide availability. Bluetooth is another wireless standard that
offers simplicity combined with relatively low capacity. It’s
currently the favored technology for wirelessly connecting
cameras, cell phones and headsets to laptops, but this could
easily change if WiFi hardware becomes cheaper or Bluetooth
hardware gets faster. In most applications, Bluetooth is a
convenient way to eliminate a cord as opposed to the only way to
Before We Start Troubleshooting
18
get the job done. Most laptop users with built-in Bluetooth
capability probably never use it, or even know that it’s there.
What’s My Laptop Worth?
When a laptop suffers a major failure, the first thing to do is
estimate both a repair cost AND a replacement cost. We aren’t
fans of the disposable culture or the waste involved in replacing
equipment that can be repaired, but we’d be doing you a
disservice by ignoring the cost trade-off between repairing and
replacing a laptop. When calculating the replacement cost, it
should be based on the cost of a brand new laptop that meets
your needs, not on some high-end model that has everything
you could possibly dream of and only weighs three pounds.
What you paid for your current laptop two or three years ago has
no relationship to the value. You may have gotten a great deal,
you may have been ripped off, but laptop technology has been
advancing rapidly and prices have fallen dramatically, especially
if you know how to shop.
You may save a lot of money by troubleshooting and
repairing your own laptop, especially if the cost of having it
repaired for you is so high that the only logical alternative would
be to buy a replacement. Yet it turns out that you can usually
find a new laptop that will suit most purposes for between $400
and $500 in the U.S., by shopping for new laptops that are
nearing the end of their product cycle and thus have rebates.
Not only will it come with the latest operating system installed,
but the battery will be new and the unit will be covered by a
manufacturer’s warranty. The best comparison shopping source
to locate laptop bargains at the major electronic chains is
www.salescircular.com, which simply aggregates the Sunday
newspaper specials with rebate information from the major
electronics outlets in every state. We specified the U.S. above
because laptops in many countries are subject to special duties
or sold through exclusive distribution networks that double the
price and greatly impact the repair/replace calculus.
In case you decide to go the route of buying a new laptop,
don’t buy with the intention of upgrading or the attractive price
will dissolve like a desert mirage. Never buy the extended
warranty from the store. While you’ll occasionally run into
somebody who bought the extended warranty and ended up
The Laptop Repair Workbook
19
with a lemon they had replaced, the stores sell these warranties
because they are profitable for the stores, not for the consumers.
It’s difficult for people to let go of their original purchase
price as a starting point in assigning a value to their laptops. But
new cars that famously lose a percentage of their value when you
drive them off the lot don’t age as quickly as laptops, and you
can still drive a fifty year old car on the highway. You can’t get
on the Internet with a twenty year old laptop, and you need to be
a little eccentric (and very patient) to do it with a ten year old
model. The built-in wireless which allows you to access the
Internet from public places or anywhere in your house with a
wireless router has only been around for a few years, and the
same is true for laptops capable of running Microsoft’s Vista
operating system.
Shopping For Used Laptops
Shopping for used items is a passion for some people, but if we
could only give one word of advice about buying a used laptop, it
would be "Don't." Fortunately, talk is cheap so we'll go on at
length about when it does or doesn't make sense to buy second
hand and how much to pay for different capacity models. But
remember you can almost always find a new laptop for under
$500 in the U.S. at a local big-box retailer. You'll get a brand
new laptop with the latest Windows installed and enough
memory to run it, a big hard drive, a combination DVD/CD
recorder and player, built-in USB 2.0, WiFi, 56K modem and a
wired network connection as well. The battery will be new, so
you'll actually be able to work untethered for a few hours at a
time, and you’ll be able to expect two or three years of trouble
free operation if you don’t abuse it.
New laptop purchasers often have an old one to sell, so
they’re available everywhere from eBay to newspaper ads,
company-to-employee sales to PC shops, and of course, Internet
sites. The major used laptop sellers on the Internet are usually
selling reconditioned or remanufactured units, where
reconditioned basically means they turned it on and it worked
and remanufactured means something was broken so they
replaced it. The term “factory second” means it failed the final
test at the factory, so instead of shipping it, they reworked it on
Before We Start Troubleshooting
20
the spot and didn't sell it as new. Sort of like buying scuffed
shoes at a discount clothing outlet.
There are more brand name laptops than desktops sold
these days, with some popular models being the Dell Latitude,
Toshiba Satellite, Sony Vaio, HP Pavilion, Lenovo Thinkpad,
Acer Aspire and Apple iBook. Most of these models have been
around forever, which means you can't just buy a Satellite and
assume that you're getting a recent Toshiba laptop. The
Thinkpad, Sony Vaio and the Apple laptops probably hold their
value a little better than the other brands, because they are
rarely sold at deep discounts, even on closeout. However, there’s
no reason to pay for name recognition in a used laptop, and
notebooks that have operated long enough to be sold used are
well beyond any initial quality concerns.
Second hand laptop prices are often advertised as
discounted from their list price. Their original list price! You
couldn't find a laptop priced for less than a grand a few years
ago. A company that bought a bunch of cheap laptops a few
years back for a $1000 each and is now replacing them with new
laptops will offer them to employees at 50% off. The employees
believe it's a great bargain and pay $500 for obsolete junk with
worn out batteries (with the software removed if the company is
conscientious) when they could be buying a brand new laptop
for the same price that's several generations better. The same
thing happens with the used and reconditioned notebooks sold
over the Internet or on eBay. The seller says, "List price $1,699"
or "I paid $2,349" but they're talking about retail laptop prices
without rebates that are two or three years old.
Look carefully at the capabilities of these notebooks.
Their CPU speed probably doesn’t meet the latest operating
system requirements, they won't have much memory installed,
nor a DVD recorder, and if they include wireless, it may be an
external adapter. The battery will be on its last legs, and the
screen will have dead pixels, and the USB ports will be the older
1.1 version. The keyboard and mouse pointer will be old and
unresponsive. The model that "listed" at $1,699 will be
promoted as a steal at $795, and the $2,349 laptop (with
"$1,000 of software I added") will have a minimum bid of
$1200. They may get it too, but not from you. You could be
The Laptop Repair Workbook
21
buying a new high-end laptop for that kind of money, with a new
warranty, the latest legal software and all the bells and whistles.
Then, you finally find some cheap used laptop prices,
between $200 and $400. Sounds a lot better on the face of it,
but here’s what we found doing a little Internet shopping today.
The "Special" on one of the Internet's top sites was a 650 MHz
HP notebook Pentium III with Windows 98. They were selling it
for $429 before shipping and handling. That's eight year old
technology! No wireless, an 18 GB hard drive (cheap new
notebooks ship with 100 GB hard drives, five times the
capacity), and while Windows 98 was a good release, Windows
XP or Vista are required to install most new software. The same
store offers a whole range of used laptop models for $299, all
with tiny hard drives (6 GB), less than a fifteenth of what you'd
get in a $500 new model), Windows 98, 128 MB of RAM and
CPU speeds under 400 MHz!! These are typical prices for used
notebooks, and you're paying 60% to 120% of the price of a new
laptop for one that won't run software you need and can't be
upgraded. All over the Internet you’ll see second hand laptops
with Pentium III CPU's selling for between $500 and $1000,
advertised as bargains, it's just insane.
Price Range Advice
$400 - $500 Buy a brand new laptop with factory and store rebates.
Make sure you fill out the rebate paperwork correctly,
stick with in-store rebates if possible.
$300 - $400 The only used laptop we would recommend buying in
this range is a lightweight or desktop replacement
model running Windows XP or Vista, with built-in
wireless and a DVD recorder, and then only from
somebody you know.
$200 - $300 If a friend or family member has a laptop less than one
year old that they want to sell you because they’ve
bought a better one, just make sure it suits your needs
and check the battery life.
$100 - $200 You can gamble a little in this price range, meaning if
you’re buying a beater laptop to drag around, as long as
it has wireless and works, you might get what you paid
for.
$0 - $100 Before you accept a free laptop, understand that the
local landfill will probably charge you $10 or $20 to
dispose of it if you find it’s not any use to you.
Before We Start Troubleshooting
22
This value analysis ignores one major factor; the software
and data on your hard drive. If you’ve installed software and no
longer have the original installation discs, or programs that
won’t function under a new operating system, you may be
willing to spend more on repairs. If you have data on the hard
drive of a dead laptop you haven’t backed up, treat that as a
separate issue. If the hard drive is still alive, the data can be
easily read off in another machine. Just remember these two
things. First, your laptop is going to die or become obsolete
sooner or later and probably sooner, so at some point you’ll be
throwing good money after bad. Second, one of the most
common and cost effective laptop repairs is to replace a failed
hard drive. Unfortunately, a failed hard drive means the loss of
your programs and data unless you have back-ups.
Ironically, the most sensible purchase of a used laptop
you can make is purchasing a broken one, providing it’s the
exact same model as yours and you need the good parts. For
example, if your laptop experiences a motherboard failure, it’s
normally a death sentence since new motherboard prices are
prohibitive. If you can find somebody selling the exact model on
eBay with a dead hard drive and a cracked screen, needless to
say, you’ll get it cheap. Then you can move your hard drive and
LCD to the replacement laptop, and you’re back up and running,
with parts to spare.
Shopping for New Laptops
Shopping for a laptop based on how much you can afford is a
mistake that normally leads to spending too much. You need to
determine what functionality you require before you start
shopping for a new laptop. For some users, the style and the
color of the laptop will be the deciding factor, and nothing we
can write in this book is going to change your taste or priorities.
But if your interest in purchasing a laptop is to acquire a tool for
accomplishing certain tasks, we can probably save you some
money.
We aren’t going to refer to specific CPU brands and
speeds, memory technologies, hard drive access times or the
latest generation of anything. In the context of this book, we’re
assuming you’re shopping as an alternative to gambling on an
expensive repair that may not solve the problems with your
The Laptop Repair Workbook
23
current laptop. Getting you fixed up with your dream laptop
isn’t the point, we just want to make sure that if you do buy a
new laptop, you buy one that will meet your needs for a couple
years.
Laptop manufacturers design their different model lines
to appeal to different markets, though the basic functionality of
all the units when sitting on a desk and plugged into a power
outlet is very similar. The processor speed and the hard drive
capacity are far less important to the average user than the builtin
options, such as digital film readers, a web cam, or extended
life battery and hot-swap capability. Despite the best efforts of
the manufacturers to segment the laptop market into distinct
audiences with increasing price points, they do a fairly poor job
at explaining the differences between their model lines. So your
principal homework before you start shopping for a new laptop
is to determine which of the following groups you fall into.
Basic Consumer Model
The least expensive laptops, the ones we keep referring to as
being available new with or without rebates in the $400 to $500
range, are the basic consumer models. These laptops generally
represent the state of the art - of the previous year – and are
designed primarily for low manufacturing cost. Despite the lessthan-
exciting design goal, these laptops are still very capable
and powerful machines because they are sold in a very
competitive environment. They normally weigh in the five or six
pound range, come standard with the latest Microsoft operating
system, and are unfortunately loaded with “free” trial version
software.
The basic consumer model laptop will run any standard
software you buy. It simply won’t run that software as fast as a
model that’s designed for high performance. The standard
laptop will happily connect to the WiFi hotspot in your home or
local café, and will offer high speed USB connectors for hooking
up printers, scanners, cameras, etc. It will have a practical
battery life of two or three hours, and a reasonably good LCD
display. It probably won’t have any advanced security features,
such as a fingerprint scanner or face recognition, but these
features are less practical than showy.
Before We Start Troubleshooting
24
The Home Entertainment Laptop
Once the province of desktop PCs, laptops have pushed into the
home entertainment market, especially with younger consumers
who may move frequently and appreciate the all-in-one
approach of having the screen, computer, DVD player and
Internet connection all in one small package. Laptops designed
for the home entertainment market tend to have faster CPUs
and larger screens, employing the 16:9 letterbox format which is
ideal for movie playback and some gaming applications. They
may also feature brand-name video processors and better sound
reproduction than standard consumer models. However, there’s
only so much you can get out of tiny laptop speakers and limited
amplification, so most people using a laptop for home
entertainment will purchase USB speakers. More serious
gamers, at least for the near future, will stick with desktop PCs,
as a high performance video adapter for gaming requires more
power than an entire laptop, and costs more than a low-end
model as well. Home entertainment laptops run from $600 to
$1000.
Business Laptops and Tablets
Laptops targeted at business users are more likely to feature
docking station connectors. Docking stations allow the laptop to
be quickly installed in a base that ties it into all of the business
systems in your office, such as the network, printers, a standard
keyboard and mouse, all without fooling around with multiple
USB connectors and networking cables. Docking stations may
also offer a DVD recorder, or other devices missing from a super
lightweight laptop. Business models are also more likely to
support hot-swap bays for flexibility, so you can install a second
hard drive in place of the DVD drive, or a second battery for that
eight hour flight. They also tend to ship with less junky trial
software, since corporate IT departments have less patience and
more say in the matter than the average consumer.
A hybrid laptop/tablet design is becoming more popular
with students and businessmen alike, although the original
tablets were quite distinct from laptops in their design. The
hybrid laptop/tablet employs a screen with a single hinge point
in the middle that allows the touch screen capable LCD to be
swiveled all the way around and laid back over the keyboard,
The Laptop Repair Workbook
25
with the screen facing up. At this point, the laptop functions like
a very capable tablet, and can be used for taking notes longhand,
drawing, or stepping through checklists and forms with a stylus,
a popular business application for field representatives. Prices
for tablets and business laptops range from $700 to $1500.
Desktop Replacements
Laptop manufacturers struggle to draw a line between their
home entertainment and desktop replacement lines, but that
line is rapidly disappearing. The key design goal of desktop
replacement laptops is to come as close as possible to the
performance and capacities of desktop PCs without sacrificing
portability. This results in heavier laptops that draw more
power, have shorter battery lives, and often sport outrageously
large screens. The assumption behind desktop replacements is
that they will usually be placed on a reasonably sturdy desk or
table, plugged into the wall, and stay in the same place most of
the day. But, unlike desktop PCs, you can actually take these on
the bus or the plane if you need to, and specially designed
backpacks and rolling luggage are making this a more practical
option. For the salesperson who travels by car and sets up shop
in a motel room every night, it is the next best thing to bringing
his entire office with him.
Desktop replacement users will often opt for a port
replicator. A port replicator is the poor man’s version of a
docking station, and port replicators sold by the manufacturer
often use the docking station connector. Aftermarket port
replicators that use the PC card slot or USB port can’t offer quite
as much functionality, but they are portable between systems
and may meet your needs better. Port replicators allow you to
connect USB devices, a keyboard, mouse, wired network, etc, by
plugging them into the port replicator rather than attaching four
or five cables to the laptop. That way, when you want to take the
laptop to the coffee shop, you only have to pull one connection,
and you’re on your way. Desktop replacements are priced in the
$800 to $2000 range.
Lightweight Travel Laptops
Finally, we come to the luxury cars of the laptop world, the
lightweight travel models. For starters, you can expect to pay
Before We Start Troubleshooting
26
between three and five times the cost of an entry level consumer
laptop for a reduction of about 50% in weight. Lightweight
laptops may weigh as much as four pounds, if they feature a full
size keyboard, a reasonable size screen and a permanently
installed DVD recorder. But as you move up in price and down
in weight, the screens and keyboards become smaller, and the
standard options you have come to expect in even the cheapest
laptops begin to drop away. The first feature to go in lightweight
laptops is normally the DVD drive. Rather than featuring a hot
swap bay for flexible configuration, the lightweight laptops are
more likely to offer an extended life battery as an option, one
that adds size and weight to the laptop.
You won't find a lot of choice for true travel notebooks
when you check your local big box retailer, though they may
have a small Sony Vaio for around $2,000 and some version of a
light Toshiba. Shopping for serious lightweight notebooks is best
done on the manufacturer websites. After you zero in on the
exact model that suits your needs, you can try shopping other
websites on price, but there’s usually not much variation in the
high end models. Sony, Dell and Lenovo (Thinkpad) are the
lightweight or sub-notebook leaders, but Toshiba, HP and Acer
also sell models that come close to the four pound limit, and
don’t leave you stuck carrying around an external DVD drive.
Lightweight laptops can cost anywhere from $1000 to $3000.
Laptop Upgrades
First, let us reiterate that you should never buy a used laptop
with the intention of upgrading it. If you've owned a laptop since
buying it new or if it was given to you as a hand-me-down, an
upgrade may be worth looking at if you need a little more
functionality.
The easiest and most effective upgrade most laptop
owners can make is upgrading the RAM. A ancient second hand
notebook with 32MB of RAM will see a major performance
increase (especially when you open multiple windows) if you
upgrade it to 64MB, and an old notebook with 64 MB will run
"like new" if you add 128MB for 192MB total. Newer laptops
with 256 MB or 512 MB installed can often be upgraded to 1 GB,
but if your plan is to install Microsoft Vista, make sure the rest
of the hardware, especially the CPU, is up to speed.
The Laptop Repair Workbook
27
Laptop RAM is usually upgraded by removing an access
panel on the bottom of the notebook that’s secured by a single
screw, and snapping the new module into place. However,
upgrade capacity is normally limited to a single module unless
you remove the factory installed RAM, and the size and
technology of that memory module is fixed in advance by the
laptop manufacturer. Consult your owner’s manual or visit the
memory guide at crucial.com before attempting to upgrade. The
trick is to first make sure your laptop doesn't already have the
maximum amount of RAM installed, and to buy the right
module. Also, some laptops don’t feature easy access to the RAM
slots, and you’ll have to remove the keyboard or open up the
body.
Now comes the bad news. The RAM is the only internal
laptop component that can be easily upgraded. The problem is
three-fold. First, laptops are highly proprietary, and an upgrade
part like a DVD burner that will fit the physical form, provide
the right connector and be supported by the laptop BIOS may
not exist. In some instances, you may be able to use the outer
plastic bezel and metal frame from the original CD/DVD-ROM
to match a new recorder to the body of the notebook, but it still
has to be a supported model. Second, these parts are so much
more expensive than desktop components that it's not funny.
Your best bet is to buy "pulls," components scavenged from
broken or discarded units, but even these aren't cheap. Your
current laptop BIOS may not support the new CD or DVD drive,
or even a larger capacity hard drive. Never fool around with
flashing the laptop BIOS unless you are absolutely desperate,
because if it goes wrong, you'll be left with a brick. Third, while
you can generally install a larger hard drive, it probably won’t be
any faster and transferring all of your software is quite a job and
rarely a simple task.
You can't upgrade the motherboard in your laptop. In
most cases, you can't even replace it cost effectively if it fails.
The same goes for the LCD screen, though you can hook up to an
external monitor if your screen is failing and you aren't ready to
replace it. You may be able to upgrade the CPU if you’re
desperate for performance, but it’s better to start by installing
the maximum amount of RAM and to clean up your operating
system. The reason laptop manufacturers design some
motherboards with a CPU socket rather than soldering the CPU
Illustrated RAM
upgrade:
laptop_2.htm
Before We Start Troubleshooting
28
to the motherboard is it allows them to use the same
motherboard in a wide range of model-price points, with the
CPU speed being the main differentiating factor. By designing
the laptop with a replaceable CPU, they can avoid committing to
manufacturing fixed quantities of each model before they see
how sales go, and keep their options open should CPU prices fall
dramatically. But unless your laptop was one of the lowest
performance models in the family, it’s unlikely that upgrading to
the fastest CPU available will make much difference. It’s also a
more delicate job than upgrading the memory, and may require
a dreaded BIOS upgrade as well.
So, have we eliminated any hope of recording CDs or
increasing the storage capacity of your old laptop? Absolutely
not. Laptops are designed to work with peripherals, and as long
as you have a USB 2.0 or even an older USB 1.1 port, you'll have
no trouble finding inexpensive external drives that will also be
portable to any other computer you own or may purchase in the
future. For moving data between computers or storing a few
gigabytes of data, USB JumpDrives are a great solution. You can
carry a JumpDrive on your key chain (and many are designed
for just that), and read the data on almost any computer in the
world. You can also connect to a router for high speed internet
access through your USB or the network port. Another handy
notebook upgrade is an external mouse and keyboard. A simple
USB splitter for less than $10 will provide both ports in one
convenient rat tail, especially handy if your notebook has only a
single PS/2 port for a keyboard or a proprietary keyboard port.
If you’re feeling depressed about the limited upgrade
options for your laptop versus a desktop PC, look on the bright
side. Laptops are “green” computers, in the sense that they are
designed to use the minimum amount of materials (for reasons
of weight) and to run on batteries. The requirement for all
laptops to run on batteries makes them far more power efficient
than desktop PC’s, where manufacturers compete on
performance. Most laptops run on appreciably less electricity
than a 60 watt light bulb, while the power demands of desktop
PC’s can be five to ten times as much. Of course manufacturers
of expensive laptops want to compete on performance as well,
and in some cases they might actually dip into the battery
reserves for peak power demand even when the laptop is
plugged in.
The Laptop Repair Workbook
29
Things That Go Wrong With Laptops
The main selling point of laptops is that they are portable and
can operate on batteries. Not surprisingly, two of the main
drawbacks of laptops are that they are portable and can operate
on batteries. Portability leads to a whole series of problems that
you don’t normally encounter with desktop computers. About
the worst of these problems is that laptops are easily stolen or
lost, simply by forgetting them in funky places, like on top of the
car or on the bus or train. Beyond losing the whole laptop,
portability introduces the problem of getting banged around and
stepped on. You won’t encounter too many desktop computers
with cracked LCD screens, but people often treat closed laptops
like a plank of wood, which they aren’t. Stacking things on top of
laptops, especially in overhead baggage compartments, can
result in enough point pressure on the lid to crack the screen.
Component or board level damage is also possible when
sufficient violence is done to a laptop.
For most electronic products, high reliability is achieved
by reducing the number of moving parts. Unfortunately, laptop
designs universally feature a hinged screen that is opened and
closed each time the laptop is moved somewhere. While the
engineers have gotten very good at designing the hinges and the
cables that bring signal and power to the LCD screen and
backlight in the lid, they are still moving parts. Intermittent
problems with notebook screens that seem to come and go at
random after you move the laptop are usually related to the
opening and the closing of the lid. One time the wire twists the
right way, next time the wire twists the wrong way. The wiring
bundles are no fun to fix, and doing any repair job on a laptop
that requires working with the hinges can lead to wires getting
broken or shorted. All this means that if you aren’t going to be
carrying your computer from place to place, you’re better off
buying a desktop.
Batteries, which make laptops such popular café and
classroom accessories, are another Achilles heel that desktops
do without. Battery technology has advanced tremendously in
the last 20 years, but the same basic problems still plague all
high power battery devices. Battery packs achieve a high enough
voltage to operate a notebook computer by including multiple
battery cells connected in series. This makes it very difficult for
Before We Start Troubleshooting
30
the computer to fully comprehend the state of discharge of the
battery pack as a whole. Additionally, with some technologies,
user behavior makes a huge difference in how long the battery
will remain viable. The most recent battery technology to
achieve wide acceptance is Lithium-Ion. These battery packs are
the least demanding in terms user lifecycle management, but
they have issues of their own, like limited shelf life and
occasionally bursting into flames.
Another generally unremarked flaw of laptops is the
moral hazard. The convenience and portability of laptops
promotes reckless behavior on the part of their owners. Who
hasn’t been guilty of working on shaky tables in cafes while
traveling, with a tall Pilsner glass or a paper cup of coffee just
inches from the keyboard? If somebody bumps into the table or
elbows over the glass, it could be curtains for the computer.
Eating and drinking over a desktop computer normally only
puts the keyboard at risk, a $10 replacement part. Eating and
drinking around a laptop puts the whole unit at risk should
liquid find its way past the keyboard membrane and cause a
short circuit. A sticky desktop keyboard is easy to clean or
replace, while a sticky laptop keyboard is a nightmare to clean,
and will cost around $80 to replace if you do the job yourself,
and as much as $250 if you pay somebody else.
If you do spill something on your laptop, the best bet is to
hold in the power button (and your breath) for three or five very
long seconds to turn it off. The normal human reaction of
pulling the plug after spilling a liquid on electronics doesn’t
accomplish much when the battery is installed. After it shuts
down, unplug it if it’s plugged in and sop up as much of the
liquid as possible with a paper towel. Once it’s turned off, if you
have to turn the laptop upside down to remove the battery,
sopping up most of the liquid before it gets past the keyboard
membrane is probably a better choice. In any case, when you’ve
cleaned it up as good as you can, remove the battery and let the
laptop dry out overnight. If it was anything worse than a little
splash of water or coffee on the keyboard, remove the keyboard
to check for any signs of wetness underneath before attempting
to power it up again. You should find some well illustrated
disassembly instructions for your model online.
The Laptop Repair Workbook
31
Leaving laptops in cars is another killer. You don’t want
to leave your laptop in a hot car anymore than you want to leave
your children or your dog. Well, there are laws against leaving
children and dogs in cars, and unless you’re a cloning advocate,
they can’t be backed up. Backing up your laptop is your only
defense against all of the awful things that await it in the world.
The only critical component in your laptop when it comes to
preserving your data, your programs, your favorite websites and
e-mail addresses, is the hard drive. A nasty jolt at the wrong
moment, a bad power surge, too much heat or an overturned
cup of coffee can all lead to a hard drive’s premature demise.
There are services that can recover most of the data from hard
drives that aren’t too badly damaged for a cost between a few
hundred and a few thousand dollars, but making it happen in a
hurry costs extra.
Backing Up
Backing up your important data on a DVD on a regular basis
means you can walk into any electronics store, walk out with a
cheap new notebook, and be up and running again within a
couple hours. If you run a business, are in the process of writing
a novel, or have other information that you need to back up
every time you use the computer, there are two more choices.
One is to buy a cheap JumpDrive (a USB memory stick with four
or eight GB of storage) and copy your most frequently used data
onto it whenever you’ve made substantial additions. The trick, of
course, is to keep the JumpDrive in your pocket when you aren’t
using it and not the USB port, where it could walk off with the
whole laptop. The other option is to sign up with a remote
backup service that uses the Internet combined with software on
your computer to incrementally backup every change you make.
Of course, it means another password to remember and another
monthly bill. The poor man’s version of online backup is to
simply create a free account at Yahoo!, Google Gmail or MSN
Hotmail, and e-mail yourself attachments on a regular basis.
Moving beyond the hardware, the most frequently
encountered laptop problems are due to software. This situation
isn’t unique to laptops, as a profusion of software is equally as
bad for desktop PCs. A huge number of laptops are replaced
because they’ve slowed down so much they’re barely usable.
Laptops don’t get slower with age, the clock that ticks along a
Before We Start Troubleshooting
32
billion or so times a second to drive the digital brain of the
laptop never changes speed. Laptops get slower when they are
overloaded with software or attacked by malicious programs.
The new and often unwanted software gives the laptop more and
more to do until it can barely finish anything.
If your laptop came with a factory rescue DVD or CD, and
it hasn’t gotten scratched up, you can always run the recovery
software to restore the laptop to the exact state it was in when it
was new out of the box. Of course, it didn’t have any of your data
or software on it when it was new out of the box, so you better
have a perfect backup before taking what technicians call the
“nuke and pave” approach.
Malware And Protection
When presented with a laptop that takes forever to boot and
runs incredibly slow for a period of time afterwards, the main
culprit you’ll encounter is improperly configured anti-virus
software. Anti-virus software is a necessity for protecting
Windows based computers that are connected to the Internet.
The problem comes about when the anti-virus software is
configured (intentionally or unintentionally) to run a full scan
every time the computer is booted. A full scan means that the
anti-virus software ignores the fact that it’s already checked
every file on your hard drive and checks them all again. This can
take anywhere from fifteen minutes to a couple hours,
depending on how big your hard drive is and the speed of your
laptop. During this time, the anti-virus software is not only
eating up processing power, it’s also continually accessing the
hard drive, and the little hard drive activity LED will be lit
almost continually. The operating system is happy to let you try
to do other things while all of this is going on, but the
performance will be so bad that you’ll be sure that you have a
virus when what you really have is too much cure. You’ll also
encounter laptop computers that have multiple copies of antivirus
software from different vendors trying to run at the same
time, or one after another. There’s such a thing as too much
caution.
The best way to meet your need for anti-virus software,
anti-spyware software, anti-adware software and firewall, is to
buy an all-in-one suite. Kaspersky, AVG and Avast are some of
The Laptop Repair Workbook
33
the more reliable and friendly suites, but you aren’t likely to see
them preinstalled on a new laptop. Technology columnists and
PC magazines like to produce articles comparing and rating the
various suites, and often give you the impression that not buying
the top rated package is like leaving your doors wide open. As
long as your suite does daily updates of the virus database, you
should be fine unless you spend all of your time exploring the
dark side of the Internet. The big brand-name security suites
used at your office or your bank (and which may be pre-installed
in a trial version on your laptop) are usually a lousy choice for
home use. These suites are often resource hogs, require a bit of
specialized knowledge to configure well, and can be extremely
unfriendly to honest software applications you install.
When the user of an unprotected laptop ventures into a
bad neighborhood, often after being misled by a search engine
result or a link on a social networking site, the result can be
some form of browser hijack. Your browser has probably been
hijacked if as soon as you connect to the Internet, ads start
popping up in your browser, or your home page has changed to
some innocuous looking directory site you’ve never heard of. In
milder cases, downloading and running a security suite after the
fact may fix the problem, though you might have to do the
download on another computer and copy the installation files to
CD or a memory stick for the stricken laptop. That’s only if
you’re lucky though. Security software is best suited to keep
malicious programs off your computer. Once they get in,
removal can be a long manual job, with you or the technician
constantly going back to Google and searching for the next piece
of the puzzle. It can take a computer professional six or seven
hours to clean up a laptop after a particularly nasty browser
hijack and trojan installation. Even then the solution depends
heavily on somebody else having figured out the cure and
sharing it online. Since an ethical computer technician doesn’t
want to charge you $300 to $500 in time for cleaning up a
malware infestation, the total reinstall, or nuke-and-pave
option, is often taken.
Aside from malicious software, laptops face the usual run
of software related problems. There’s accidental deletion of
program files and icons, registry corruption, poorly written
programs not playing nicely together and over-full hard drives.
While you could spend the rest of your life typing and not put a
Before We Start Troubleshooting
34
dent in your hard drive capacity, pictures and video from digital
cameras or music and movies downloaded over a high speed
Internet connection can eat through space at an amazing rate.
Your laptop counts on having some hard drive space available at
all times to use as a scratch pad while managing the data in
memory. If you don’t leave enough free space open, you’ll start
getting crashes and file corruption.
Perhaps the most annoying problem faced by the buyer of
a new laptop is all the undesirable free trial software the laptop
manufacturer has been paid to include. After booting up a new
laptop and registering the operating system, the first thing to do
is to get rid of all of the trial software, especially the anti-virus,
and replace it with a product of your choosing. This can take a
few hours, as many new laptops need an hour of clucking away
to themselves to unpack all of the software baggage pre-installed
on the hard drive in compressed form. The length of this process
depends on the manufacturer, and they usually include a slip of
paper in the packing box letting you know that the laptop will
need to spend a little time alone after it’s powered on.
Basic Repair Techniques
Before we move on to troubleshooting laptop hardware, it’s a
good idea to cover some basic techniques you can use to increase
the odds of actually fixing the problem, rather than making it
worse. Here’s the #1 favor you can do yourself. Before taking
apart your laptop, search online for an illustrated repair
procedure for your exact model family. Your best friend in
searching for online repair guides is Google, but be prepared to
spend a good hour or so looking for a well illustrated page.
You’ll need one that shows the procedure you need to carry out,
or at least how to get the body open without breaking anything.
Laptops usually ship with a User’s Manual in PDF format
on the hard drive, which can be read on screen or printed
through Adobe’s free Acrobat Reader. But the user’s manual is
normally limited to some simple upgrades or component
replacements and illustrated with a limited number of line
drawings. The actual repair manual is sometimes included with
the pre-installed documentation. If not, you can often find it on
the laptop manufacturer’s website or through Google. For recent
models, you should try the manufacturer’s website first, but
The Laptop Repair Workbook
35
don’t be surprised if you find the repair manual poorly
illustrated.
Getting Set Up
The next tip is to create your own illustrated guide as you go
along! You don’t have to do any writing or plan on publishing it,
but a digital camera can provide invaluable documentation and
help in finding your way back should the repair prove more
complicated than you hoped. It’s easy to forget whether a cable
ran to the right or left of a drive, or above or under another
cable. Yet these details are planned out by the engineers and
may be important to promote air flow or prevent abrasion.
Unless you’re doing a hardware hack, the laptop should go back
together exactly the same way as it came apart, and a couple
dozen photos from your digital camera can make all the
difference. Digital photos are free, so don’t skimp.
A large, flat workspace with good lighting is also a key
ingredient to a successful repair. You can’t expect to fix your
laptop working on your lap, unless you’re doing something
really simple, like replacing the RAM. Ideally, you should create
a workspace where you’ll be able to leave the disassembled
laptop for as long as the job takes. Keep in mind that the
troubleshooting process doesn’t always identify the right
problem, or the only failure. You don’t want to have to put the
whole laptop together again just because you’re waiting for a
part to show up, or a longer block of open time to work on it.
Although laptops are pretty rugged when screwed together,
many of the components are quite delicate when they are
removed from the laptop, or left hanging from a connector.
Moving a laptop around in a disassembled state is always a bad
idea, even if you put it in a box.
Screwdrivers And Screws
Screwdrivers are the only tools you need to do the majority of
laptop repairs, but you’ll often need more than one. Most
laptops are put together with Phillips head screws, but these are
the small electronics sizes. The Phillips screwdrivers most
people have around the house are #2 or larger. The largest size
that you might use on a laptop is the smaller #1, and you’ll
almost always need at least one of the #0 or #00 sizes. All three
Before We Start Troubleshooting
36
of these, the #1, #0, and #00 can be found in any decent
electrical precision screwdriver set. In a pinch, you can also use
jeweler’s screwdrivers, but jeweler’s screwdrivers have very slim
handles that make it difficult to generate the torque needed to
break some screws free. Laptop screws are installed with a little
thread adhesive to prevent vibration from loosening them up.
Most people doing home repairs don’t bother using new
adhesive when reinstalling screws, though you can purchase it at
your local hardware store.
Don’t fool around with trying to remove screws with a
cheap all purpose tool that comes with dozens of replaceable
screwdriver bits. Not only will the bits have trouble fitting in
some of the recessed holes, they tend to flake apart and they
often strip the screw or Torx head as they fail. A single stripped
screw head can stop you dead in your tracks on a laptop repair
job, so it’s important to use a quality screwdriver that’s the right
size for the screw and fits easily into any recessed holes.
A bigger problem than removing the screws is keeping
track of them. It’s important to know which holes screws came
out of when the screws are different lengths. If you put a screw
that’s too long in the wrong hole, it may punch through and
damage something. Even if they don’t do damage, screws that
are too long won’t hold the laptop closed properly, and screws
that are too short won’t hold anything. Sometimes the holes are
labeled with numbers molded into the plastic, where the
numbers might refer to the screw length, or they might refer to
the screws that must be removed for a specific procedure. If
you’re going to count on those numbers, label the first screw you
remove for each number and make sure all the following screws
match it.
Otherwise, you can take several approaches to tracking
screws, all of which can have their drawbacks. The first is to
label each screw hole with a pencil or a bit of masking tape and a
pen as you remove each screw. If you’ve never worked on a
laptop before, you can make a line that’s the length of the screw
for a label. If you’ve worked on enough laptops to be familiar
with screw lengths, you can use letter labeling, like “L” for long
and “S” for short. Unfortunately, you can end up with one of
those nightmare laptops that use six or seven screw lengths just
Tips for laptop
disassembly:
laptop13.htm
The Laptop Repair Workbook
37
to hold the body together, leaving you with extended labels like
“LL” for longer long, and “MS” for medium short.
Some people try taping the screws right next to the holes,
but this gets awkward if you take a bunch of screws out of the
bottom and then have to work with the laptop upside-up. The
tape can come loose and the laptop won’t sit level and will feel
unstable when you’re working on the top. Another approach is
to make a map of the screw holes on a piece of paper, either by
drawing it or by poking holes in the paper where the screws go.
Then you can tape the screws to the map as you remove them. If
you have a really large work area and aren’t worried about
disruptions from kids or pets, you can just lay the screws out on
the table in the pattern you remove them, but they are prone to
rolling out of position if you give the table a bump.
Static Electricity
Static electricity discharge is always a worry when working with
laptops, but you don’t have to rush out and buy an anti-static
mat if you’re not going to be doing repairs on a regular basis.
The main thing is to be sensible and not to work on the laptop in
an area where you get a static shock every time you touch the
doorknob. You should avoid activities that create static build-up
on your body, like removing clothing in the middle of the job
because you’re getting frustrated and overheated, pacing back
and forth on the rug, or stroking the cat in an attempt to calm
yourself down. Ground yourself before digging into the laptop
by touching a grounded appliance or the screw in the center of a
grounded outlet. You can purchase a static bracelet on a tether
for a few dollars online or at your local electronics store, but if
you aren’t used to working with one, you can end up catching
the cord on something and knocking parts off the table or into
the open laptop body.
Disconnecting The Power
Before you start any laptop repair, you should unplug the laptop
and remove the main battery. If your laptop is equipped with a
secondary battery in a hot swap bay, remove that as well. The
main danger of working with the battery installed is that the
laptop may be inadvertently powered on, which would lead to all
sorts of component damage if it happened at the wrong
Before We Start Troubleshooting
38
moment. Once the laptop is disassembled, you may need power
to continue with the troubleshooting, for example, if you’re
trying a spare backlight. At that point, it’s often better to use the
AC power than the battery power because the AC power adapter
can be quickly disconnected if there’s a problem. If you power
up with the battery, there’s no quick way to power back down
again in an emergency.
Windows Device Manager
Windows Device manager has been using the same symbols to
display device problems from early versions right up through
Vista. A problem is expressed by any extra symbol, like a "!" or a
"?" appearing next to a device. Double click on the problem
device(s) or else click on the little "+" to the left of any
questionable devices to get the expanded view. When you double
click on any specific piece of hardware in the expanded view,
you can select the Resources tab, where there's a little box in the
lower half that reports on conflicting devices. Write down any
information in the box, rather than trusting it to memory.
A red "X" means that the device has been disabled, but is
still eating hardware resources and may cause conflicts with
other installed devices. This information appears on the
"General" tab of Device Manager, the first screen that comes up
when you double click on a specific device or right click and
choose “Properties.” At the bottom of the screen there are two
check boxes or a pull down menu under the heading "Device
Usage." If the "Disable in this hardware profile" box is checked
or selected, uncheck it or select “Enable” and then reboot.
A black "!" next to a device means Device Manager sees a
problem, but the device may actually work. It could be caused by
a conflict or a version problem with the driver, so try updating
the driver from the manufacturer’s website. A blue "i" doesn't
indicate a problem as much as a warning that the device's
resources have been set manually. This could be the result of
your having cleared up a conflict by manually forcing different
resources on a device. A green "?" means that a compatible
device driver has been installed. The driver is the first thing to
check if you're having any problem with a device, and running a
compatible driver rather than an exact match from the
The Laptop Repair Workbook
39
manufacturer is often the fault. Device Manager also includes
an interactive troubleshooting wizard that’s worth a try.
The main Microsoft Knowledge Base article on Device
Manager codes at press time:
http://support.microsoft.com/kb/125174
Searching for Answers
Internet search is the single most important tool at the disposal
of technicians and home users alike these days. Whether you use
Google or favor another search engine, a half hour of serious
searching and reading can save you hundreds of dollars and
many hours of frustration. Most readers will have quite a bit of
experience with search by this point, but we’re going to suggest a
simple model that may increase your efficiency when searching
on laptop errors or troubleshooting questions.
Let’s say you power on your laptop and get the error:
Pxe-E61: Media test failure, check cable
The plain reading of this error is that there’s a boot
problem because the BIOS can’t read the boot drive, and is
reporting a test failure. While the connector may really be the
problem, it’s also quite possible that the hard drive electronics
are failing or that it’s not spinning up. Before you tear out your
hard drive and put it in a USB enclosure to test on another
computer or try to recover data, it’s a good idea to search the
Internet for reports of the same error in identical circumstances,
to narrow down the possibilities.
When you go to search, the critical part of the error
message is not the text, it’s the code at the beginning, “Pxe-E61”.
In order to limit the search results to a reasonable number,
combine the error code with some information about your
model, or the circumstances surrounding your failure. For
example, you might Google:
pxe-e61 acer aspire
Before We Start Troubleshooting
40
or
pxe-e61 overheated
or even
pxe-61 spilled drink
The next step is to read the short descriptions Google
presents with search results (ignore the advertisements at the
top and the side of the screen unless you are searching for parts
to buy). Pay special attention to the bottom line of each search
result, which shows the website URL. The results you want to try
first are those from the laptop manufacturer or discussion
forums, including sites like: forums.cnet.com, daniweb.com,
geekstogo.com, forums.techguy.org, asklaptopfreak.com, etc.
Results from blog hosting sites are often pure advertising comeons,
populated with text scraped or stolen from discussion sites.
The next step is to quickly skim down the page to see if
the problem being discussed is identical or at least very closely
related to your own. However interesting the thread might be,
and many encompass tragic human interest, you can’t afford to
spend ten minutes reading every page that comes up or you’ll
fritter away hours or days without finding the information you
need. Do not try following links on the site in hopes they’ll get
you closer to your solution. A large number of the links are just
advertising or spam, and even the honest links are far less likely
than Google to get you where you need to go. So if the page isn’t
what you need, hit the back button, and try the next likely result
in Google. If the back button doesn’t work (some sites disable it
to capture you), just type the Google address back into your
browser bar.
You should be able to go through the first couple pages of
results in a couple minutes if you only visit the sites most likely
to offer real help. If you don’t have a good answer to your
problem at this point, rather than going to the fourth page of
results, or the fortieth, it makes much more sense to rephrase
your search. The general rule, if you are getting thousands or
tens of thousands of potential results when you do a search, is to
narrow down your criteria by adding more key words. So you
might now search on:
The Laptop Repair Workbook
41
pxe-e61 acer aspire overheated
or
pxe-e61 overheated acer spilled drink
It’s OK if you get zero results, you’ve only wasted two
seconds. But don’t start out with super specific searches or you’ll
end up limiting the search engine’s ability to show “quality”
results, in favor of showing results that simply match all the key
words. There’s a lot of automated spam on the web created by
programs that scrape text from different pages and string it
together to fool the search engines into believing it’s valid. Super
specific searches may end up excluding the most useful results
that have good discussions of the problem, but don’t appear
because they use slightly different wording.
Another source for illustrated laptop repair guides is
authority sites. In web parlance, authority sites are those that
collect links to web pages on a specific subject, and organize
them in such a way that you can quickly find a link to the
information you are looking for, if it exists. Many of the web
pages listed on authority sites were created by non-professionals
using a digital camera to document their journey into laptop
repair. The reigning champion of authority sites for photo
illustrated laptop repair guides is:
http://www.repair4laptop.org
Before We Start Troubleshooting
42
The Laptop Repair Workbook
43
Troubleshooting Power Problems
Because laptops are designed to be portable and function on
battery power, they are engineered to run on the DC (Direct
Current) power that batteries provide. But all of the power
distribution networks in the modern world utilize AC
(Alternating Current) because it’s a more efficient and
economical way to move electricity long distances. This means
that laptops are shipped with an AC adapter that plugs into a
regular outlet and converts that AC power into the proper DC
voltage for the laptop. Most modern AC adapters for laptops can
function on a power grid ranging from 100 to 240 volts AC. You
should take a look at the label on the AC adapter, often called a
“brick” before you go traveling around the world. All that’s
needed to plug a variable AC adapter into a different power grid
is a new end for the plug, purchased at a local hardware store for
around a dollar.
If your laptop doesn’t turn on when you hit the power
button, the power system is a logical place to begin the
troubleshooting process. The laptop power system can be
viewed as three separate parts: The A/C adapter that gets
plugged into a power outlet on one end and into the laptop on
the other end, the laptop motherboard or power regulation
daughter card that monitors and distributes power to the laptop
components, and the battery. The vast majority of laptops
manufactured these days can operate without the battery
installed. In some cases, the manufacturers will suggest that you
remove the battery and store it somewhere cool if using the
laptop in one location for extended periods of time, as in weeks
or months. In all instances, it pays to read the owner’s manual
on how to best extend the battery life for the particular model.
One of the oddities about troubleshooting laptop power
failure as opposed to PC power failure is that the battery gives
the laptop an independent power system for as long as the
charge lasts. If the PC in your home is plugged into a bad power
outlet or its power strip is accidentally switched off you’ll quickly
figure out why. But if the power strip gets turned off while you
are operating your laptop, or a breaker trips, or the local power
grid suffers a brown out, you might not even notice until the
battery runs down. That’s why it’s important to not jump to
conclusions about laptop battery failures, and to try charging the
Power adapter
connectors:
laptop16.htm
Hardware Systems Troubleshooting
44
battery under different conditions before giving up and buying a
new one. Just because the battery didn’t charge while the laptop
was plugged in doesn’t mean the battery is bad. The power to
the AC adapter may have been interrupted, the AC adapter or
cable to the laptop may have failed, the connector tip may have
been partially plugged into the laptop, or the battery may have
become partially unseated. There could also be something
wrong with the laptop charging circuitry or software. Running
out and buying a new battery before investigating all the
possibilities will often mean a $100 or $150 mistake.
New laptops should have a status LED in a visible
location on the front or keyboard surface of the laptop that tells
you when the power input is good. However, that doesn’t help
you determine where the failure is if the LED doesn’t light, or
isn’t lit steadily. A simple DC voltage meter can be used to
confirm that the AC adapter is putting out the correct voltage,
though it will usually read a little high since there’s no load on
the output. A harried technician may stick the DC connector on
his tongue as a quick test to see if it’s live, but you can’t taste the
difference between 12.5 volts and 18.5 volts, and you probably
shouldn’t try. Another crude check is whether or not the AC
adapter gets warm while it’s plugged into the laptop and a live
power outlet. It shouldn’t get hot, just warm to the touch if the
battery is charging or the laptop is operating. Some AC adapters
are equipped with a status LED right on the brick that tells you
when the AC adapter believes it’s functioning properly. Don’t
forget to make sure that the cord from the wall outlet to the AC
adapter is firmly plugged into the brick.
Electronic devices often produce high frequency buzzes
and whistles under regular operating conditions. Some people
can hear these sounds, especially young folks and women, while
older men tend to have very limited high frequency hearing. A
high frequency whistling sound may indicate a capacitor in the
AC power adapter is beginning to fail, but it will often whistle
while it works for years to come. You don’t have to replace the
AC power adapter just because you can hear it, unless it gets
worse and worse over time or it gives you a headache. Because
AC adapters employ switching mode technology, they are more
likely to make noise when the battery is fully charged and the
laptop is turned off. AC adapter bricks are usually glued shut
and aren’t designed for consumer repairs, so unless you have
The Laptop Repair Workbook
45
solid electronic troubleshooting skills and a source for parts, it’s
a question of living with it or replacing it outright.
The most common laptop power failure is centered on the
junction between the connector on the end of the AC adapter
cord (the DC output) and the receptacle in the laptop. This one
inch length of wire and connectors costs pennies at the
wholesale level but leads to large numbers of laptops requiring
expensive repairs or being junked. Often the copper wires inside
the cord become frayed or broken right where they enter the
connector on the end of the AC adapter cord. Sometimes you
can struggle along for weeks or months by working on a flat
surface and getting the cord into exactly the right orientation so
that the wires maintain contact, but it’s not a smart way to go.
The wires (a number of very thin conductors twisted into a
heavier cable) are sized for the amount of power the laptop
requires. As thin wires break and lose contact, all of the power
must flow through the remaining conductors, leading to
overheating, which can cause damage or be a safety hazard. It’s
an easy enough fix, so don’t ignore it.
Starting with the AC adapter plugged into the wall and
unplugged from the laptop, there are number of clues to look for
when plugging it into the laptop. First, if it sparks, unplug it and
check for a short circuit with a multi-meter. No resistance (or
less than a few Ohms) between the conductors of the DC
connector on the laptop means there’s a short circuit inside,
which calls for taking the whole laptop apart. You normally can’t
get both multi-meter probes into the connector when the laptop
is assembled, so measure between the positive input and a
ground point of any exposed metal around the USB ports or
other motherboard connected ports. The positive DC voltage
input is usually the center pin of the barrel connector but you
can determine this by measuring the voltage on the AC adapter
to see if the outer or inner connector is positive. Often, short
circuits will have caused visible damage, like melted or burnt
chips or components on the motherboard. Other times, the
short will be in one of the attached daughter boards or drives, so
the standard procedure if you can’t see the damage is to strip the
laptop down to nothing except the motherboard, keep checking
with the meter, and see if the short goes away. If it doesn’t the
short is on the motherboard, and if it’s not obvious, the only fix
is to replace the motherboard.
Replacing an AC
Adapter connector:
laptop_7.htm
Multimeter tests
for voltage and
shorts:
laptop11.htm
Hardware Systems Troubleshooting
46
If wiggling the cord causes the power status LED on the
laptop to blink, the problem is in either the cord or the
connector. Fortunately, all you need to repair the connector on
the AC adapter cord is a new connector and basic soldering
skills, or you can bring it to an electronics shop for a cheap
repair but get the price before agreeing. Some laptops use a
highly proprietary connector for which you can’t easily find a
replacement, in which case your best option is to find a failed AC
adapter for your laptop model, cut the end off (with plenty of
slack) and splice it onto your cable. But most barrel connectors
are easy to come by and your local Radio Shack often has them
in stock. Just bring your laptop along to make sure you get the
right size. If you work on irregular surfaces (like a lap) and allow
the cord to dangle, the wires may break just inside the connector
due to pulling, despite the fact that the factory connector is
encapsulated in molded plastic. You can carefully pick apart the
molded plastic with a razor knife to temporarily fix a connection
if you’re desperate, but it’s smarter to replace the connector end
as soon as you determine it is causing intermittent power
failures.
The real killer is when the connector inside the laptop
fails. Sometimes the center pin of the connector breaks off,
sometimes the solder joints on the main board fail, sometimes
there’s a break between the connector contacts and the
motherboard contacts. In all these instances, you or the
technician has to gain clear access to the main board in the
laptop to make the repair. Even with clear disassembly
instructions, it’s a big job to attempt on your own and requires
decent soldering skills. It might be worth the effort if your only
cost effective alternative is replacing the laptop outright. The
replacement connector usually retails for less than $10 (and
wholesales for pennies), but the repair charge can be several
hundred dollars for some models if you take it to a local shop.
Within the laptop itself, most components receive power
by way of direct connection to the motherboard or through very
short cables. In this way, laptops are less complicated than PCs,
where the drives and some power hungry video cards are
connected directly to the power supply by long cables with
multiple connectors. Because of this, power failure to the hard
drive or DVD player in your laptop is rare, and in most cases
would be corrected by reseating the drive in the connector. But
The Laptop Repair Workbook
47
power failures can occur if the main board is damaged when the
laptop is dropped or a foreign substance (like beer) is
introduced. However, the laptop screen, its supporting hardware
and any special features such as a web cam incorporated in the
lid, are powered by cables running through the laptop hinge.
When troubleshooting possible power failure to the components
in the laptop lid, you have to eliminate cable failure in the hinge
or at the cable connectors as a cause.
Troubleshooting Battery Problems
Laptop battery technology has come a long way from the early
NiCad packs that had to be carefully managed. Otherwise their
charge capacity would rapidly diminish to the point where an
hour of unplugged operation was a fond memory. Some
manufacturers did a better job managing NiCad battery life than
others, but the only reason for nostalgia about those times was
that the battery packs could often be rebuilt by the ambitious
do-it-yourselfer. NiCad technology was largely replaced by
NiMH (Nickel Metal Hydride) batteries in laptops, which have
excellent charging and discharging characteristics as single cells,
but which also proved to be tricky to recharge in a battery pack
and required some management on the part of the laptop user
for maximum life. Some technologists insist that NiMH batteries
don’t suffer from the same memory effects as NiCad, but nobody
argues about their weight, both types of batteries being heavy.
Most recent laptops are equipped with Lithium Ion (Liion)
batteries, which are much lighter and don’t require any
special behavior on the part of the laptop user. However, they
have a higher internal resistance which makes them prone to
overheating at a high rate of discharge, so they have to be
equipped with more sophisticated monitoring circuitry. There
have also been a series of manufacturing problems with these
Li-ion batteries that have led to recalls due to fire risk. One
other negative characteristic of Li-ion batteries is they lose
capacity, whether you use them or not, at a rate of 15% or 20%
per year. However, since most laptops are a three or four years
item at best, you should get through the life of your laptop with
the original battery unless you go through a complete charge
and discharge cycle several times a week. If you are having
problems with a Li-ion battery, the first step is always to check
on the manufacturer website to see if it has been recalled.
Inside an old style
battery:
www.fonerbooks.com
laptop_3.htm
Hardware Systems Troubleshooting
48
Li-ion batteries are “smart” batteries, and contain
circuitry that helps to prevent them from overheating and
catching fire. The chemistry of Li-ion batteries causes their
internal resistance to rise with age and the number of charging
cycles. In some instances, your battery may stop accepting a
charge prematurely because an integrated “fuel gauge” shows
that the cycle life has been reached. You can find hacks on the
web for resetting the fuel gauge on some batteries, but we don’t
advise doing so. While the battery may work fine afterwards for
an additional period of time, it may also overheat and damage
the laptop or cause a fire.
If your laptop has two different size batteries, a main
battery and another in a hot swappable bay, don’t try to do any
troubleshooting with both batteries installed. Troubleshoot your
problem with the main battery first, and worry about the
secondary battery once you achieve normal operation. If the
bays and batteries are identical, you’re in luck, because you can
use process of elimination to determine if either one of the
batteries or one of the bays is faulty. If you work at a company
that has purchased a number of identical laptops, or if a family
member or friend bought the same laptop as you, the simple
way to diagnose whether the problem is with the battery or the
laptop is to trade batteries for a day.
When laptop owners call tech support to report that their
battery isn’t charging or the life doesn’t seem to be what it
should, tech support will often tell them to download the latest
BIOS. While it’s marginally possible that the laptop shipped
with a BIOS that has been improved in regards to battery
management, the BIOS upgrade process, called flashing, is not
reversible without special equipment. In other words, if
something goes wrong, instead of having a laptop with a battery
charging problem you’ll have a collection of perfectly good
laptop parts that won’t do anything. Flashing the BIOS is a last
resort we only recommend if you find references on the Internet
that it fixed an identical charging problem for somebody else
with your exact model. You can select the CMOS Setup option to
“Reset BIOS Defaults” without much risk, which will repair any
inadvertent changes that may have been made to CMOS
settings.
The Laptop Repair Workbook
49
The first step in troubleshooting battery life or charging
problems is to check your owner’s manual or the manufacturer’s
website for how to interpret the status LEDs on the laptop or the
battery itself. Some batteries come equipped with built-in LEDs
and a button you can press that will roughly display the battery
charge by the number of LEDs lit, or show an error state, usually
indicating that the battery needs to be replaced. On other
models, the LEDs on the laptop will change color or blink when
there’s a charging problem. In either case the operating manual
for the laptop or a search of the manufacturer’s web site should
tell you exactly what the LEDs are indicating. They won’t be
right 100% of the time, since batteries are tricky beasts, but you
aren’t taking a big gamble if you trust them.
If the LEDs indicate that the battery is being continually
charged, yet the battery only lasts a short period of time, there’s
a good chance the battery is worn out or defective. Before giving
up, perform one last test to determine if the operating system
software is interfering with charging. Let the battery charge
overnight with the AC adapter plugged in and the laptop turned
off. If the battery won’t take a charge with the laptop turned off,
you can try powering on, entering CMOS Setup, and letting it sit
and charge on the Setup screen for a few hours.
Even if the battery is healthy and the laptop charging
system is working properly, the battery lifetime will be variable
with how hard you work it. If you’re in the habit of turning the
screen brightness all the way up, playing a CD through USB
speakers, and choosing the highest performance battery
management profile, the battery will run down much quicker
than otherwise. Newer laptops offer a number of predefined
battery management profiles in the operating system, normally
accessible through the little battery icon in the system tray, and
your choice of options has a significant impact on the battery
life. The ambient room temperature and the temperature of the
laptop (if you’ve left it in a hot car in the summer or a cold car in
the winter) will affect the battery life as well.
Over the years, some manufacturers have provided
software to recondition batteries for certain laptop models.
While software might be necessary to reset an erroneous charge
count on a “smart” battery, it’s a rare situation that an Internet
search should quickly turn up something if it’s required for your
Hardware Systems Troubleshooting
50
model. Other laptops include a special reconditioning option
you can select in CMOS Setup. The built-in reconditioning
software is simply a way to run the battery down to true empty,
before recharging, which shouldn’t be necessary for Li-ion
batteries.
If you do purchase a new battery and the seller offers to
take your old battery in exchange, go ahead and send it after you
confirm that the new battery indeed solves the problem.
Otherwise, you’ll be stuck disposing of it at your local recycling
facility, which may charge a few dollars to take it. Batteries are
little chemical factories with all sorts of heavy metals and exotic
compounds, so you don’t want to throw them out with your
kitchen trash, and it’s probably illegal to do so where you live.
Laptop Video Troubleshooting
We suggested in the introduction to laptop hardware that you
think of the LCD as an electronic version of color film. The LCD
acts like a film that passes different wavelengths (colors) of light
depending on whether or not the liquid crystals are twisted this
way or that, so a bright light source is needed to bring the
display to life. The light source, located behind the LCD screen,
is called the backlight. The vast majority of laptops
manufactured today utilize a Cold Cathode Fluorescent Lamp
(CCFL). This form of fluorescent light source has several
advantages for use as a backlight, including low power
consumption, long life and uniform lighting from a small form
factor. The CCFL lamp used in laptops isn’t much thicker than a
boiled piece of spaghetti and is covered in a plastic sleeve that
helps diffuse the light evenly over the length of the tube. The
back of the laptop lid is also lined with a highly reflective
surface, such as aluminum foil, to push all the light possible out
through the LCD.
The one drawback with all fluorescent lights, as opposed
to the cheap incandescent light bulbs most people still choose
for home lighting, is that the fluorescent bulbs need a specially
conditioned power source to fire up the plasma and cause the
lamp to fluoresce. The voltage and frequency vary with the
particular lamp used, but the range for backlights is around 400
to 800 Volts at a frequency between 30 to 70 KHz. The laptop
component that supplies this lamp power is known as an
Backlight tube:
laptop_6.htm
The Laptop Repair Workbook
51
inverter, a widely used term for devices that transform low
voltage DC into higher voltage AC. The inverter for your laptop
is one of the easier parts to replace, a small circuit board that
usually costs between $20 and $80.
Now, that was a lot of techno-babble to squeeze into two
short paragraphs, and by no means is it a complete discussion of
LCD technology. The important thing to come away with is the
understanding that your laptop display consists of three basic
pieces: the LCD screen that acts like a piece of electronic color
film, the backlight which lights up the LCD from behind so you
can see it, and the inverter that powers the backlight.
Assuming that the video processor on the motherboard is
working properly and sending the LCD instructions as to which
colors to allow through in which screen points (pixels), the most
common failure for laptop displays is a dead or intermittent
inverter. When you can only see a very, very faint image of your
operating system desktop on the screen, it means that the video
system is working, but the LCD isn’t getting any backlighting.
The usual culprit is the inverter, especially if you didn’t note any
strange tinting to the laptop display in recent operation, but it’s
not easy for the do-it-yourselfer to determine with 100%
accuracy whether the failure is the CCFL lamp or the inverter.
Some laptops, especially older models, have a brightness dial on
the side of the lid, so make sure you don’t have a laptop where
the backlight can be manually turned off before continuing.
The traditional method used by technicians to test
inverters is to connect it to a known good backlight of the proper
type. Since buying a spare CCFL tube for your laptop kind of
defeats the whole point of testing the inverter, people without
access to spare laptop parts will sometimes use a cheap CCFL
tube from a PC modding kit, which can cost as little as $3 by
mail order. While the test may not hurt the inverter, there’s no
guarantee that a negative result (cheap tube doesn’t light) really
means the inverter is dead, because the two may just be very
poorly matched for each other. If you have access to a good
quality RMS multi-meter through friends or work, one that can
measure frequency to 50 MHz or 100 MHz, you should be able
to get a reading on a functioning inverter without even taking
the lid apart. The inverter is normally located below the LCD in
models with narrow borders, or to the side if there’s an inch or
Backlight tests:
laptop14.htm
Inverter board:
laptop_8.htm
Hardware Systems Troubleshooting
52
so of plastic bezel on each side of the LCD. By scanning with the
multi-meter probes over the plastic along the edge of the screen,
you should pick up a strong signal somewhere between 30 KHz
and 70 KHz if the inverter is live (note that a meter with a 50
KHz range will probably work well above that range). If you
can’t pick up the signal but want to be sure, remove the plastic
bezel from around the screen and measure right on the two
insulated wires leading to the backlight. If the inverter is
functioning, the meter will pick up the signal right through the
insulation, since the inverter is putting out a low radio frequency
signal.
An important step in troubleshooting a laptop display
problem is to plug in an external monitor. All standard laptops
come equipped with a video connector that will drive an external
LCD monitor, or even an old CRT. Sometimes you have to tell
the laptop to switch the picture to the external screen, which is
done through a keyboard combination on most models. Other
laptops will detect on power up if an external monitor is
connected and shift the display on their own. Look for the extra
little symbols on your keyboard keys, which are selected when
you depress the Fn (Function) key. You should find one that
looks like a little laptop alongside a monitor, or something
similar. Holding down the Fn key and hitting the key with the
little monitor/laptop picture will either toggle the display to the
external monitor immediately, or bring up a number of choices
on screen if it’s live. These may include choosing to display on
the laptop only, the external monitor only, to display the same
screen on both or to assign a primary and secondary display.
Some display problems aren’t difficult to troubleshoot at
all. If you notice an inky stain slowly spreading across your LCD
over days or weeks that you can’t wipe off, the LCD itself is
failing. Dead and stuck pixels often appear on LCDs over time
causing point failures in the display. There’s nothing you can do
to fix them, so just tolerate them if possible. If the laptop is fairly
new, the LCD may be under warranty and the manufacturer
normally has a specification for how many dead pixels a LCD
can accumulate before they have to repair it. Other physical
problems that may require LCD replacement are cracks and
chips on the surface. Horizontal or vertical lines or swathes of
either a single color or dead pixels usually mean the LCD will
have to be replaced. This can be caused by the contacts on the
Noninvasive
inverter test:
test.htm
The Laptop Repair Workbook
53
LCD carrying the pixel addressing information coming loose or
the electronics controlling those lines failing.
Common sense plays a big part in troubleshooting laptop
problems, especially when it comes to screens. For example,
there are a whole variety of screen problems that come and go
when you move the lid a little, from a stuttering back light to a
missing color. In most cases, this indicates that the wire bundle
running through the hinge has been compromised. Some wire
has frayed apart and is making intermittent contact with itself or
the lid movement is causing the wire bundle to pull on one of
the video connectors. If there’s a position in which the screen
works properly and you don’t have to close the lid to carry it
around the house, you’ve found a temporary fix. If the problem
has been getting worse with time, and it’s harder and harder to
find an angle for the screen in which everything works right,
take that into account when it fails completely. In other words, if
you’ve experienced a gradual failure that indicates the wiring in
the hinge or a terminating connector is failing, that’s the first
place to look when you only get a faint image on the LCD.
Without those early indications, it would be logical to suspect
the backlight or inverter first, but common sense should tell you
that the wiring and connectors are the place to start in this case.
There are also all sorts of problems with the display that
can occur due to software settings. For example, an accidental
(or intentional) keyboard combination can cause the display to
start showing everything sideways! Other times, laptops with
multiple users in families, especially where children are
involved, will have the basic screen settings accidentally
changed so that a blurry partial image is displayed. Although it
can be tough to navigate through the screen settings in this
condition, rest assured that it is just a software setting and not a
reason to bring the laptop to a repair shop or call for in home
service. Keep in mind that many electronic chains have a
minimum charge for troubleshooting, and this can be over $100.
Don’t resort to using the emergency boot disc and restoring the
laptop to factory fresh condition to fix this type of display
problem. While the restore will likely resolve the display
problem, it will also wipe out all of your data and any software
you’ve installed on the laptop. Instead, try resetting the screen
resolution and colors (accessed by right clicking in a open area
of the Windows desktop and choosing “Properties” and
Hardware Systems Troubleshooting
54
“Settings” from the resulting pop-up) to the highest color quality
and the highest screen resolution, with the needle pushed all the
way to the right. If you absolutely can’t navigate because the
image is so distorted, shut down and connect an external
monitor, which should be capable of correctly displaying a wider
range of screen settings, enabling you to change your settings
there.
The most difficult type of display failure to troubleshoot
is when nothing at all appears on either the laptop screen or an
external monitor. How are you to know if the problem is really a
video failure, and not a more fundamental failure with the
power or motherboard? The main indicators in these cases are
the sound, and the hard drive LED on the laptop case. If the
laptop sounds just like it always does for a minute or two after
being turned on, it means it’s going ahead and booting the
operating system, but the video processor or part of the
motherboard circuit for video output has failed. If the laptop
just sits there and beeps when you turn it on, or if you hear the
fan but not the hard drive chuckling with its active LED flashing
away, it means the laptop isn’t getting as far as trying to boot the
operating system. While this could be due to any number of
hardware problems, the most common and easiest to
troubleshoot or repair is RAM failure. If your laptop has two
RAM modules installed, try booting with just one and then the
other in the primary slot. If your laptop only has one RAM
module, you might consider buying one online for $20 or $30,
from a site with a good memory selector, like Crucial.com.
Laptop screens get very dirty, with fingerprint oil, dust,
smoke, etc, and some people actually clean them from time to
time. You should always turn off the laptop before cleaning the
screen, and when the only culprit is dust, a soft tissue or lint free
cloth can be used to gently wipe the screen without any cleaning
products. The next step, for more stubborn obstructions, is to
damp the cloth or tissue with a little water. If there’s something
stuck to the screen that the damp wipe won’t remove without
scrubbing, you can visit your local office supply store and buy a
mild cleaner designed for LCDs. In no case do you want to spray
anything on the screen as laptops and liquids make for bad
bedfellows. If somebody insists to you that LCD’s can be cleaned
just like a mirror because they are made of glass, they are only
half right, and it’s the wrong half. The reason some delicacy is
The Laptop Repair Workbook
55
required is that there is a filter coating on the outside of the
LCD, a kind of soft plastic, and your typical glass cleaner may
degrade or discolor the coating.
Troubleshooting Laptop Overheating
Overheating is the primary reason for a laptop to work for a
while when plugged into the wall, and then to freeze up or shut
down on its own. There are two kinds of overheating involved,
the first is component specific and the second is related to the
overall temperature inside the laptop. Individual components,
such as the CPU or video processor may simply get hotter faster
than they should due to a manufacturing flaw or installation
issue and we’ll talk about these issues in the section about
troubleshooting motherboards, CPUs and RAM. In this
discussion, we’re going to restrict ourselves to problems caused
by the whole laptop getting too hot.
Overheating usually takes place in the body of the laptop,
although it is also possible for the LCD electronics or the
inverter in the lid to be adversely affected in a high temperature
environment. Engineers employ a number of strategies to
prevent all of the heat generating components crammed into
laptop body from generating so much heat that they damage
themselves. The most important strategy is limiting the amount
of heat produced in the first place. That may sound like the
ultimate design goal, but laptop manufacturers also have to
compete with each other on performance, and higher
performance components usually mean more heat generated.
The main culprits in the heat generation cycle are the two large
processors, the CPU and the video processor. Intel and AMD
both manufacture special versions of CPUs for laptops, which
run at lower power levels (producing less heat) when they aren’t
fully employed. Temperature management in laptops goes handin-
hand with battery life management, since less power
consumed means less heat produced, and a longer battery life.
Increased fan noise may be your first indication that your
laptop is running on the hot side. It can be extremely irritating
to work on a laptop with a loud fan that frequently cycles on and
stays on for extended periods. A well designed laptop with good
power management should be almost silent in normal usage,
with the exhaust fan becoming audible only during periods of
Hardware Systems Troubleshooting
56
intensive computation. Fan speed is also controllable, so a well
designed laptop will run the fan just fast enough to keep the
temperature in the ideal operating range. However, some
manufacturers go overboard on packing in high performance
components to create a power laptop in the “desktop
replacement” style, and these monsters tend to run hot even
when they are in new condition. Go online and read some
customer reviews of your laptop when you first suspect
overheating. If the reviews include a common thread, like “the
left side of the keyboard becomes too hot to type after fifteen
minutes,” it means your laptop was poorly engineered.
It’s easy to find aftermarket products that are sold for the
purpose of cooling down hot laptops. These range from passive
devices that are intended to lift the laptop off the desk and
provide for better air circulation, to stands with multiple fans
powered from the laptop’s USB port. These powered cooling
devices might not hurt much while the laptop is plugged in with
the AC adapter, but they don’t make any sense when you are
running on battery since drawing power from the battery
increases its internal heat generation. But if you expect a
positive contribution from a powered cooling device, find one
that has its own power supply.
The most important thing you can do to prevent your
laptop from overheating is to operate it in the proper
environment. For starters, it should be placed on a hard, flat
surface, with no obstructions within a couple inches of the sides
and back. The flat surface can be at an angle, some laptops run
cooler if the back is higher than the front as this increases
passive air circulation. If you’re going to use your laptop on your
lap or some other soft surface, like a bed, find a board or some
other flat, heat-resistant object on which you can place the
laptop. If you’re using the laptop for a short time on a non-ideal
surface, like your lap, take a look at the bottom to see where the
vents are and don’t block them. And remember, if your legs are
getting too hot for comfort, the laptop isn’t very happy either.
Laptops are dependent on the surrounding air for
cooling, so if you run a laptop in an environment that’s too hot,
it will overheat no matter what other precautions you take. The
maximum operating temperature for most laptops is in the
range of the 85° to 95° Fahrenheit (30° to 35° Celsius). You
The Laptop Repair Workbook
57
should check your operating manual to make sure, but generally
speaking, laptops have a much smaller operating range, cool or
hot, than people. That doesn’t mean the laptop will immediately
shut down or refuse to work if you take it up to the attic on a
summer day, but heat is a merciless killer of electronic devices.
Operating the laptop in a high temperature environment can
lead to errors or data loss and shorten its life. By the same
token, you can’t let the laptop reach a high temperature while
turned off by leaving it in a hot car or on a radiator, and then
expect it to cool itself off when you take it somewhere nice and
turn it on. Better to let the laptop cool down before powering it
on.
Cleaning the laptop may solve your overheating problem
if it’s filled up with lint or if it has accumulated a blanket of
insulating dust on its heatsinks, which are the metal finned
structures placed on hot components to increase the surface
area that can be cooled by air. Unfortunately, unless you
partially disassemble the laptop, your cleaning efforts will be
limited to blowing compressed air through the vents, which can
also have negative consequences. You must use canned
compressed air sold specially for cleaning electronics, as other
compressed air sources may contain too much moisture and bits
of foreign matter. You should also follow the instructions,
especially if they warn you not to use the can upside-down,
which may expel propellant. On the whole, if you’re going to try
to clean out a laptop that’s experiencing overheating problems,
you’re probably better off finding detailed disassembly
instruction on the web and carefully removing the keyboard or
getting the top half off so you can see what you are doing. As
tempted as you may be to use a vacuum, don’t, unless you have
access to a special static free electronics vacuum.
Troubleshooting Laptop Hard Drives
Hard drives were named for the rigid magnetic coated discs that
replaced tapes and floppy discs for permanent storage in early
computers, but the name is also fitting as they are the hardest
working component in the computer. The rigid disc platters spin
at thousands of revolutions per minute, while a magnetic
read/write head floats over the surfaces, moving rapidly in and
out on a precision positioned arm without touching the platters.
This “flying height” clearance of a few millionths of an inch must
Cleaning laptop
fan:
lap_fan.htm
Hardware Systems Troubleshooting
58
be maintained even while the laptop is being jounced around in
an airplane or a car. To put it in perspective, it’s like trying to
drive a car at high speed while keeping the wheels about a ten
thousandth of an inch from the curb. But it works most of the
time because the disc platter is smooth as glass and the shape of
the read/write head is an airfoil that is lifted by breeze created
by the rapidly spinning disc. Hard drives aren’t sealed against
the outside world, but the air exchange is through a very fine
filter.
On very rare occasions, something goes wrong and the
head touches the platter surface in a data area. This can occur if
the laptop gets a jolt while the drive is working, if there is a
manufacturing flaw in the head or actuator arm that eventually
impairs their structural integrity, or if the hard drive is operated
outside its design parameters, like at excessive temperatures or
altitudes. The catastrophic result of the head touching the
platter is known as a “head crash” and it’s the worst hard failure
can happen to your hard drive. Because the magnetic coating on
the platter will be scraped off or destroyed where the head
contacts it, the data will be unrecoverable by any means. In the
aftermath of less catastrophic hard drive failures, such as the
drive electronics or the data interface, you can send the drive to
a specialist recovery company and pay some hundreds or
thousands of dollars to get your data read off and returned to
you on DVDs.
Most replacement hard drives for laptops sell for under
$100, but the ease of replacement varies with the laptop model
and manufacturer. Many modern laptops do give you easy
access to the hard drive by way of a small panel on the bottom of
the laptop or through a drive bay on the side, so that the
mechanical part of the job only takes a few minutes. But other
models require you to open the laptop up by removing the
keyboard or taking the whole body apart, so it’s a good idea to
check your user’s manual or investigate your laptop’s
construction on the web before you order a new drive. It’s
always a good investment to pick up an external 2.5” USB hard
drive enclosure for $10 or $15 so you can test your existing hard
drive on some other computer and make sure it’s faulty.
Otherwise, you might spend a lot for data recovery, or decide
you can live without any data that wasn’t backed-up and buy a
Hard drive test
and data recovery
with USB cage:
laptop10.htm
The Laptop Repair Workbook
59
replacement laptop, without ever realizing that the drive wasn’t
the problem.
Troubleshooting software problems is far more
complicated than troubleshooting hardware problems, yet most
software problems get laid at the foot of the hard drive simply
because that’s where all of the software is stored. Many people
assume that there’s some fault with the hard drive when the
drive activity light stays lit almost continuously and the laptop
slows to a bare crawl, but that’s the fault of the software, not the
hard drive. Along with its duty providing high speed permanent
storage for all of your programs and data, the hard drive gets coopted
by the operating system to serve as temporary storage, or
virtual memory. When there isn’t enough room in memory
(RAM) to hold all of the programs and data the laptop is
currently working on, that information is moved to virtual
memory on the hard drive. If you don’t have enough RAM
installed in your laptop or if you are running multiple “memory
hog” programs at the same time, the result will be a hard drive
that gets beat on continually and can’t ever catch up.
Another software issue that leads to an overworked hard
drive is the installation of background programs that load
automatically at boot and eat into your computing resources.
The most common problem is improperly configured virus
software that insists on running a full scan of every file on the
hard drive whenever Windows is restarted. This can lead to the
whole system crawling along for a half hour every time you
reboot, with the hard drive working furiously away all the while.
A different performance problem may manifest itself if you are
participating in a file sharing network for music or videos or a
shared telephony network. Aside from the fact that you may be
putting your privacy at risk, you are opening the door to this
external network to utilize resources on your computer, which
can slow you down when you don’t even realize you’re sharing.
Hardware Systems Troubleshooting
60
As time goes on and you add new software for your
digital camera, printer, scanner, etc, the boot time will get
longer and longer and the overall performance will decline as
well. Anytime a new software installation gives you the
opportunity to add that software to your start-up programs, just
say no. It’s easier to start a program when you need it with the
click of a mouse than to sit through an extra minute of boot time
and the overall degraded performance that comes of having that
software always loaded in memory.
Malware, from viruses to adware and spyware, can
destroy your laptop’s performance, compromise your security,
and pollute your operating system so badly that simply wiping
the hard drive and starting over again starts to look like a
reasonable alternative. The only right way to deal with malware
is to keep it off your laptop from the start. For Windows based
systems, this means running a protective software suite,
including anti-virus software, anti-ad software, anti-spyware
software and a firewall. Some of these components are built-into
recent Windows versions, but it’s better on the whole to replace
them with an all-in-one package that updates daily. If you have
enough patience and access to the Internet, you can fix most
malware problems after the fact. But this involves doing
extensive research online and manually eradicating, one-by-one,
the nasty programs that your belated installation of a protective
suite can’t cure.
Some laptops are shipped with a recovery DVD that will
restore your laptop hard drive (and its operating system) to
factory fresh condition. While this means losing any software
you’ve installed and any data you haven’t backed up, it’s
sometimes the most cost effective choice you can make. If you
can’t solve a malware problem yourself, it’s likely that a
computer shop will charge you hundreds of dollars to do so,
whether successful or not. Frequently the store will point out on
accepting the laptop that they are “not responsible for user data”
and after seeing how bad the problem is, will do the factory
restore themselves and you’ll pay through the nose for having all
of your data wiped out. Mail-in repair depots working under
warranty are notorious for wiping out hard drives to “cure”
problems, so it’s always best to back up your data before letting
anybody work on your laptop.
Easy type hard
drive replacement:
laptop_1.htm
The Laptop Repair Workbook
61
Laptops that don’t ship with a recovery DVD provide
software, and usually a desktop icon as well, for creating a DVD
recovery set. You should do this soon after you purchase the
laptop, carefully label the DVDs and store them in a safe place
away from the laptop. The recovery set will normally consist of
two DVDs, which is unfortunate, since much of that capacity
goes to backing up all the unwanted trial programs the
manufacturer has included on your new laptop.
Troubleshooting Wireless Connectivity
Laptops are one of the few computing devices to undergo a
revolutionary change years after becoming mainstream.
Originally, the main selling point of laptops was that they were
mobile and could work on battery without a power outlet.
Today, more and more people are inclined to think of laptops as
Internet access appliances, since there are so many public places
you can go with a wireless laptop and hop onto the Internet for
free. Initially, wireless networking adapters for laptops were
add-on options, first PCMCIA cards and later USB adapters.
These days, all of the new laptops have built-in wireless
adapters, and some are even moving in the direction of built-in
cellular network modems.
People new to wireless computing often confuse WiFi
technology with cellular phone technology. The wireless
capability built-into laptops is known as WiFi, and is defined by
the IEEE standard for networking, (802.11b/g/n and sometimes
y), where “b” is an older, slower standard, and “g” is the most
widely used. Faster and more powerful versions, “n” and “y”
have been defined for some time but were only implemented in
laptop hardware very recently. WiFi technology relies on low
power transceivers built-into both the laptop and the
modem/router that brings high speed Internet into your home
or workplace. WiFi may also be transmitted through stand-alone
routers or repeaters (access points) that are hard wired to a high
speed network. The range of the current WiFi networks is very
low, on the order 100ft (30m) within a structure, depending on
the construction, and not more than a few hundred feet (100m)
in the open air. Within that working range, the quality of the
signal will drop off rapidly, leading to slower operation and lost
connections.
Involved hard
drive replacement:
laptop_9.htm
Hardware Systems Troubleshooting
62
The wireless adapters in laptops draw a couple watts of
power that could be saved if you aren’t on the web, and may also
allow others to access your laptop if it’s set up improperly. This
has led most manufacturers to provide an external switch to
disable the WiFi functionality. Not surprisingly, the first
problem most new laptop owners encounter with trying to
connect to a wireless network is that their WiFi has
inadvertently been switched off. The next most common
problem is that the signal strength is too weak to hold a
connection. This can be extremely confusing if the network is
working fine for a person sitting at the next table, but that
laptop might have a more sensitive receiver, be set in just the
right location, or even be accessing a different network. When
you’re troubleshooting a wireless connection, it makes sense to
get as close to the router as you can, certainly in the same room
if it’s in your own home, so you can eliminate signal strength as
a possible issue.
In order to prevent every stranger who walks by from
accessing any network with WiFi capability, there are a number
of security options that can be set on WiFi routers. The most
common of these is simply enabling password protection, so
that any laptop trying to connect to the network will have to
provide a password for the initial connection (after that the
operating system remembers the password). The standard
security for most routers today is WPA (WiFi Protected Access)
with the long key (128 bits) requiring a longer password and
offering somewhat better protection than the older WEP
(Wireless Equivalent Privacy) implementations. Many routers
come with a default key printed on the label of the router in Hex
(numbers 1-9 and letters A-F), either 10 or 26 characters long,
depending on the level of security. If the router allows you to
create your own password (using the full keyboard character
set), the equivalent password will be 5 characters for the lower
security level or 13 characters for the 128 bit key. WEP security
can be cracked by anybody who downloads the right software
and has the patience to set up within range of your router and
spy on the traffic. But it usually works well enough to keep the
neighbors from eating all of your bandwidth by using your highspeed
connection to download movies and play games.
Some high speed Internet providers ship wireless routers
with the security enabled and don’t bother to tell the customers
The Laptop Repair Workbook
63
about the encryption key on the bottom until they call technical
support complaining they can’t connect to their own network.
More frequently, a family will pay somebody to come in and set
up a wireless router in their home, or the original network may
have been set up by a friend or family member who isn’t around
anymore. That person could have entered the password for the
computers present in the home or business at that time, but
when a new laptop is purchased or an existing computer loses its
software settings, that password will have to be entered again.
First, try the key printed on the router label, but if a custom
password was created when the network was set up, you’ll either
have to find the piece of paper where it was written or chase the
person who set up the network. If the password absolutely can’t
be recovered, search the Internet for how to reset the router
(varies with brand), create a new password and enter it on all
the computers that use the connection.
In some cases, it’s easy to reset the password or turn the
security on and off by connecting directly to the router with an
Ethernet cable and typing the fixed IP address for the router
into your browser. In recent years, manufactured Ethernet
cables supplied with PC equipment have been yellow, and while
color doesn’t serve as an absolute identification, it might help
you find the cable in a box of stuff you never use. Connecting
directly by cable to the router is an important troubleshooting
step for wireless connectivity even if you don’t have a password
problem. If you can’t connect to the Internet even after plugging
directly into the router, neither the wireless adapter in your
laptop nor the wireless transceiver in the router are at fault. If
you plug directly into the router via the Ethernet cable and you
gain access to the Internet, you can continue troubleshooting
wireless issues. Check Device Manager to see if it’s complaining
about the network hardware. If not, and you still can’t gain
access at this point, the problem is either with the high speed
modem and ISP, or a networking software issue within the
operating system.
High speed modems, often called routers if they include a
built-in router, are equipped with a series of status LEDs that
can be used to diagnose many connectivity problems. Whether
you have a cable modem connecting to the cable company, DSL
via the phone company or one of the more esoteric high speed
modems, they should always include an LED that tells you if the
Hardware Systems Troubleshooting
64
connection between the modem and the Internet has been
established. If this link light is out, or has changed colors, say
from the familiar green to an ominous red, power down the
modem and turn it back on again. This hard reset will usually fix
dropped connection problems caused by storms, power surges
or signal interruptions, providing the modem hasn’t been
damaged. A modem/router will also include a status LED to
show whether an Ethernet cable connection to your laptop is
good, and your laptop will have a little status/activity LED for
the network connection as well. While color coding isn’t
universal, solid green usually indicates a good connection, and
blinking green or orange usually indicates activity. Some
modems include an LED to tell you if the DSL or cable link to
the ISP is good even when the Internet isn’t functioning.
Operating system issues affecting connectivity can
include firewall (security software) settings that prevent your
computer from establishing communications with the Internet
Service Provider (ISP), or the failure to install the software that
ISP requires. Unfortunately, there are also more complicated
problems that will require drawn out conversations with the
ISP’s technical support department to troubleshoot. If you’re
adventurous, or desperate, you’ll find all sorts of third party
software online that will reset the Windows stack or change
registry settings back to defaults, but you’re better off trying the
tech support route first if a software glitch is at the bottom of
your problems. Also, some older versions of Windows that
supported WiFi did so through some software applications
provided by the wireless adapter manufacturer rather than
through the operating system. Setting up wireless
communications on these older systems can require steps
unfamiliar to the typical user who expects Windows to go out
and find the new wireless connection without operator help.
Troubleshooting Motherboard, CPU and Memory
The most expensive and hardest to replace component in your
laptop is the motherboard. The expense isn’t due to the intrinsic
complexity. Motherboards for desktop computers are more
capable and cost much less. Laptop motherboards are expensive
because they are unique to the model and the brand, and no
generic replacements are available. If the motherboard fails,
your choice is to buy a new one from the manufacturer at a price
The Laptop Repair Workbook
65
that will cost about as much as buying a new consumer grade
laptop, or to look for one in the used market. Oftentimes, people
sell their old laptops on eBay “for parts only”, just like you might
sell a car that can’t pass inspection, and as long as you don’t pay
much you aren’t taking a big risk.
Motherboard failures are among the hardest to diagnose
with a high degree of confidence because all of the components
in the laptop are connected to the motherboard one way or
another. When confronted with a dead laptop, you’ll find that
our diagnostics send you through all of the major subsystems
before considering the motherboard. Sometimes, the only way
for a home user to positively identify that a problem is with the
motherboard and not with a component is to test that
component in another computer, or swap in a known good
component to test the laptop. For example, any number of
failures related to the hard drive can turn out to be due to the
failure of the hard drive controller or the connector, both of
which are part of the motherboard. The same goes for the DVD,
the keyboard, the RAM or the CPU. In some cases, as with a
display problem, you can use an external monitor to test if the
video processor on the motherboard is functioning properly. But
with a drive failure, you may not know for sure if it’s the drive or
the motherboard until you test the drive separately.
Fortunately, total motherboard failures aren’t regular
occurrences, barring physical abuse of the laptop such as
dropping it or spilling drinks. You’re more likely to encounter a
connector problem with the motherboard, like the power jack
breaking a solder joint, then a true electronic blow-out. One of
the most problematic motherboard components, the RAM, is
normally socketed and easily accessible through a hatch on the
bottom of the laptop. Since the motherboard can’t function
without the RAM, most technicians will try replacing it before
they even start the troubleshooting process. The motherboard is
equally helpless if the CPU has failed, but in many instances the
CPU is permanently soldered to the motherboard, and it can be
a laborious replacement task even if it’s socketed. While you
probably don’t have a spare CPU of the proper type lying about,
RAM is very cheap and replacing it is perhaps the easiest job you
can do on a laptop. If two memory modules are installed in your
laptop, you can test them by taking out the second one, and then
swapping the two if the motherboard still appears to be dead.
Hardware Systems Troubleshooting
66
Intermittent failure of the motherboard, CPU or memory
is nearly impossible to properly diagnose without swapping
parts, but if overheating is involved, you can make some
educated guesses. If the video goes wonky when the laptop is
hot, the problem is likely the RAM or the video processor (which
is usually a motherboard component). We briefly discuss some
of the garage technician hacks for certain video processor
failures in the notes for video troubleshooting. If you get total
lock-ups or blue screens of death when the laptop heats up, the
problem is often the RAM or the CPU.
In many models laptop manufacturers employ daughter
cards, which are independent circuit cards that attach to the
motherboard and provide functions like wireless, a dial-up
modem, and Ethernet. Some designs also put the graphics
processor on a daughter card. The use of a communications
daughter card, especially modems which are often damaged by
lightning strikes, allows for a cost effective replacement if the
laptop isn’t too old. Until you research your model on the web
you won’t know for sure what functions are integrated on your
motherboard or which daughter cards might be included. A
second hand video daughter card can go as cheap as $20 on
eBay, so it’s always worth checking if your video is integrated on
the motherboard or on a separate daughter card before making
any decisions.
Replacing the motherboard in a laptop is no cakewalk for
a trained technician who has never worked on the particular
model, and it’s a multi-hour task for a gifted beginner with good
illustrated instructions. Assuming the replacement motherboard
is good, there are still a large number of things that can go
wrong, from forcing screws into the wrong holes to breaking
delicate cable connectors that aren’t designed for repetitive use
or rough handling. Due to the cramped geometry and the
relative fragility of the cables, it’s very easy to accidentally break
a conductor while doing the work, introducing a new problem
that will be difficult to troubleshoot.
In some instances, your laptop will diagnose its own
problem and produce a text message or beep code (a series of
beeps when you power on the laptop). Looking up those beep
codes on the manufacturer’s website should tell you if there’s a
definitive problem with the motherboard that will require its
The Laptop Repair Workbook
67
replacement, or indicate a problem with the CPU or memory.
Memory problems are easily resolved by replacing the RAM
module, but CPU problems are often caused by the failure of a
direct CPU cooling system. Engineers don’t have very much
flexibility in building cooling systems for laptop CPUs due to the
cramped space and low headroom. The CPU will always be
equipped with a finned metal heatsink, and either there will be a
fan mounted on the heatsink to draw off the heat, or the
heatsink will be located in the air flow generated by a remote fan
and directed through a fan hood. Before replacing a CPU, it’s
worthwhile to try reseating it in its socket and reinstalling the
heatsink with a fresh layer of thermal paste. Also, you should
confirm that the fan cooling the heatsink is operating, either
visually or through feeling the airflow.
Troubleshooting Laptop Dial-Up Modems
Even if you’ve been using high speed Internet access at home for
years, you might still find yourself in need of dial-up when
traveling outside large cities or taking a summer vacation. If
your Internet connection is the basic infrastructure of your
business life, you can’t wander out in the rain looking for a café
with free wireless every time you need access. Dial-up access at
56Kbs is surprisingly good for both e-mail and general web
work, as long as you don’t have to deal with large attachments,
video, or audio files. Some day, when wireless access is truly
omnipresent, laptop manufacturers may do away with dial-up
modems, but until then, they are an indispensable feature for
many laptop buyers.
Some laptop manufacturers now offer built-in cellular
modems, but there remain several drawbacks to these. First, the
cellular providers in the US use different technologies, so the
built-in modem will probably only work with a single provider.
This in turn forces you to sign a contract with that provider to
use the built-in modem even if you use a different cellular
provider for your phone, who would have offered a voice/data
package deal. Cellular Internet access remains expensive, with
prices ranging from around $50 to $80 a month, depending on
the carrier, length of contract, and package deal. Signing a two
year contract for cellular Internet access is likely a greater
investment than purchasing the laptop. Also, regular WiFi
(which is free in many locations) is much faster than cellular
Hardware Systems Troubleshooting
68
Internet access, and cellular access comes with restrictions for
heavy users. Finally, it’s easy enough to buy a cellular modem
and plug it into your laptops PC card slot, which you aren’t likely
to be using for anything else, and a cellular modem may even
come free when you sign a contract with your carrier.
If you go back far enough in time, say the mid-1990’s,
there were laptops being sold without an internal dial-up
modem. Getting online required an old serial port external
modem or a special adapter, often a PCMCIA card. These days,
all laptops have a built-in 56Kbs dial-up modem, and serial
ports and parallel ports have been replaced by USB ports.
Inexpensive modems that include fax capabilities are still
available in USB versions as replacement modems for laptops.
When it comes to hardware failure, external modems are easier
to troubleshoot than internal modems because you can always
try an external modem on another laptop or PC to see if it still
works.
Dial-up problems usually have nothing to do with the
modem hardware itself. The more common causes are service
provider issues, ranging from hardware failures with their
modem pool or their Internet backbone connection, to your
having forgot to pay the bill and getting locked out of your
account. If you can hear the modem dial the phone, and the
result is something other than a whistle, your problem isn’t with
your modem hardware. If you hear the dialing but the dial tone
never alters, you’re probably dialing with tone on an old pulse
only system. If the phone rings on the other end, and a voice
picks up or you get a recorded message, you’re dialing the wrong
number. If the modems connect to each other (lots of whistling
and hissing) but you fail to get on, it’s most likely an invalid
username or password. In all instances, when you are
troubleshooting modem problems, you should enable the
modem audio, so you can hear what’s going on.
Most modems are set up to dial only when they hear a
dial tone, so if you aren’t plugged into a live phone jack, you’re
unlikely to hear anything. The first test for troubleshooting dialup
problems is to try dialing with a regular telephone on the wall
jack you are using, and then take the telephone cord out of that
phone and plug it right into your laptop modem port for testing.
This eliminates the chance that your modem patch cord is
The Laptop Repair Workbook
69
faulty, or that the output port on the phone, FAX or other phone
connected device you were plugged into isn’t really passing
through the live line. Never assume that a phone jack is good
just because it exists. Houses all over the world are full of
extension jacks for phones that have never worked, were never
tested, or were cut off decades ago. If there’s an easily accessible
network interface box for testing a phone outside the house, it’s
a good way to troubleshoot whether a line problem is in the
house or the responsibility of the phone company.
If your problem isn’t with getting connected but with
staying connected, the problem likely lies outside of your laptop.
In some cases, the modem you are connected to in the service
provider modem pool will be bad, or connected to a flaky power
source, or employing a “dump for inactivity” scheme. More
frequently, you may find that your connection is slow or fragile
at certain times of day, or during weather events. In the former
case, telephone trunk lines get noisier (electrically) during peak
activity periods, which may include first thing in the morning,
after school and after supper hours. Weather events, from rain
to wind, can degrade line conditions over a period of time or
lead to frequent disconnects. The best indication that you are
dealing with an environmental or service provider problem
rather than a laptop hardware issue is if the problem only occurs
from time to time.
However, there are some failures that will be attributed to
either the modem hardware in the laptop or the driver software
that supports it. All Windows based systems come equipped
with decent troubleshooting for modems in Control Panel,
though the exact sequence and tab labels to arrive at the
diagnostics vary from Windows 95 up through Vista. A modem
that passes the Windows diagnostic is almost never bad, though
the connection can certainly suffer if the laptop experiences
overheating problems. If the modem fails the Windows
diagnostic, or if the modem is identified as a problem in
Windows Device Manager, the first step is to find the current
driver for the modem on the manufacturer’s website and
reinstall it. If Windows can’t find the modem, it’s a hardware
failure. Some manufacturers, in their modem troubleshooting
suggestions, may suggest that you upgrade the laptop BIOS by
flashing the latest version. This shouldn’t be necessary unless
you’ve upgraded the operating system and there’s a known
Hardware Systems Troubleshooting
70
problem with the old BIOS documented on the Internet.
Remember that a simple work-around in the form of a USB
modem is always available, and doesn’t risk turning your laptop
into a useless brick.
If your laptop frequently locks up or freezes online, there
are two basic possibilities. If hitting CRTL-ALT-DEL allows you
to bring up the task list and close the connection, the problem is
due to the way your browser, e-mail, or other internet
application reacts to time-outs or other dial-up issues. But if
you’re getting a blue screen of death or the laptop doesn’t
respond to CTRL-ALT-DEL, it’s likely an issue with overheating
or the motherboard, CPU or RAM. Laptops generally implement
their modems in software, rather than including a DSP (Digital
Signal Processing) chip, which means that the CPU and
motherboard are doing double duty when the modem is in use,
and it could be just enough to push a marginal heat problem
into the red. Don’t think in terms of motherboard replacement if
there’s a possible overheating, motherboard or CPU problem
(RAM is easily replaceable) that only manifests itself during
dial-up modem use or if the modem port breaks off the
motherboard. You aren’t giving up any convenience or mobility
by using a USB modem, as they are quite small and you’re tied
to a phone line in any case.
A final tip is that many laptop makers put the dial-up
modem, wireless, and Ethernet networking together on a
daughter card. If all of these fail at the same time, a problem
with the daughter card is a good bet.
Troubleshooting DVD/CD Playback and Record
Laptops have standardized on a DVD/CD recorder and player
being a standard feature, with the exception of the lightest and
most expensive models. If your laptop is a couple years old, you
may have a DVD player combined with a CD recorder, or even
just a DVD and CD player. You’d have to go back to around 2001
for laptops manufactured with just a CD player, and most of
those still had a built-in floppy drive. Some higher end laptops
intended for travel use put the DVD player in a swappable bay,
so it can be easily changed for a second battery which extends
the laptop’s unplugged life to a full business day, but a few
models only support external DVD drives. Another swappable
The Laptop Repair Workbook
71
bay option is a second hard drive, handy for secure work
environments where the data doesn’t leave the office, or for
power users doing video editing on the road. There may even be
a floppy drive option available, if you can see the point of
swapping out your DVD recorder for a floppy drive. Laptops
with swappable bays usually feature “Hot Swapping” which
allows you to swap bay components without powering off the
laptop. It’s neat technology, but read the owner’s manual
carefully before giving it a go.
If you own an older laptop, the simplest troubleshooting
step for laptop burners (DVD or CD recorders) is determining
whether or not one is present. DVD/CD drives are usually
labeled with multiple icons right on the outside face of the tray
that detail the capabilities of the drive. If the icons show
“Reader” or “ROM” rather than “RW” or “Recorder”, you may be
looking at an older laptop without recording functionality.
Another giveaway is the installed software. Laptops with disc
burners will ship with recording software, often times with both
the laptop manufacturer’s recording software and a third party
recording package. At least one laptop model comes fresh from
the factory with three different ways to record DVDs. The
software packages may have different strengths and weaknesses.
For example, the manufacturer software is usually there for
recording basic data discs and for creating a back-up image of
the laptop hard drive, if the laptop didn’t ship with recovery
media. Another software package might be designed for creating
and replicating both CDs and DVDs for general use, while a
third application might handle creating photo DVD’s for your
television player, or home movies. If you purchase a third party
recording package, you may find that you have to update the
DVD recorder firmware before it will work with the drive. This
firmware upgrade is similar to the BIOS Flash upgrade in terms
of the underlying process, but it’s safer because the firmware
only affects the DVD or CD recorder, and can be retried if it fails.
Hardware Systems Troubleshooting
72
One of the worst failures you can encounter with your
drive is when the tray simply won’t eject. While the operating
system is running, the drive may be locked or disabled in
software, but when you first power on the system, the tray
should pop out pretty quickly in response to hitting the eject
button. There are a few reasons a tray will fail to eject. If the
drive isn’t properly seated in the bay it may be mechanically
binding or not connected to power. If the drive is in a swappable
bay, try removing it and reinstalling, and make sure that the
release latch snaps to the locked position when it’s installed. If
the drive is permanently mounted, it shouldn’t break free of its
connector unless it’s not secured in place. This can happen if the
laptop is secured with a single screw which was removed in an
earlier repair and never replaced. Loose drive failures can creep
on you. The drive can function and stay in place for months
without being secured, because it’s a tight fit and the power/data
connector tends to hold it in place.
If the tray doesn’t eject even when the drive is seated
properly, the last resort is to power down and use the emergency
release pinhole on the front faceplate. You can do this with the
drive installed in the bay, but if it’s the swappable type, it’s
easier to do with the drive out and on the table. Straighten out a
length of a paperclip that’s just thin enough to fit through the
hole, and gently insert it. Listen for the release click and try to
feel it through your fingers. When the tray releases, it may
spring out half inch, or it may barely move at all, so you have to
get a hold of the front of the tray to pull it out. If a disc has come
apart in the drive, either because it shattered or a stick-on label
lifted off, getting all the bits out and getting it working again
isn’t a high probability, so don’t test it with a disc of any value
after attempting the repair. If it’s an electrical/mechanical
failure of the ejector mechanism, repairing it yourself isn’t
practical.
Unless you typically use your laptop to watch movies or
listen to music CDs while traveling, you may find it is less
painful to get by without one than to buy a factory replacement
for an older model. Thanks to the availability of inexpensive
external DVD/CD recorders for USB, you can bypass the
internal drive and just plug in the USB drive when you need to
record a disc or install a new program. The nice thing about an
external USB drive is you’ll be able to use it on different laptops
Optical drive
emergency release:
laptop12.htm
The Laptop Repair Workbook
73
and desktop PCs as long as it lasts, while an internal laptop drive
generally requires an exact replacement for that model family.
Another note for movie fans. All new laptop DVDs should
play legal copies of DVD movies without any special actions
being required on your part. When a DVD drive works with
some discs but won’t play movies, the fault is almost always in
the decoding software, known as a CODEC (Coder/DECoder).
Anything that changes the support software for your media
player, including automated operating system updates, might
render your current CODEC useless. In this case you to must go
on the web and download a new version before movies will play
again. Because most playback and recording problems are
software specific and impact a large number of users, you can
save a lot of time by researching the problem on the Internet.
The most common read failure for DVD/CD players is
dirty or damaged discs. Because the discs hold up so well, some
people have gotten into the habit of not storing them in their
envelopes or jewel boxes. You’ve probably seen discs stacked in
mounds in drawers or strewn in messy piles on desks, yet they
seem to work most of the time when needed. But when your
laptop won’t read a particular CD or DVD, the first thing to do is
to clean it with a nice lint free cloth, flannel shirts work well, and
inspect it for scratches and surface build-up, like jelly donut
stains. If cleaning the disc works, you’ve found your problem,
but if it doesn’t, check whether or not the drive will read a nice
factory fresh movie or music disc. You can try using a drive
cleaning kit of the type sold in office stores or online, but don’t
spend a lot because they usually don’t fix the problem.
In rare cases, a DVD/CD hardware failure might
announce itself during boot with a text line reporting something
like “DVD drive failure” or the drive may disappear from CMOS
Setup. If the hardware isn’t aware that the drive is installed, the
operating system software isn’t going to have much of a chance.
These types of hardware errors either mean the drive electronics
have failed and aren’t communicating, the drive has become
dislodged from the connector in the drive bay, or the
controller/cable on the motherboard has failed. The only other
problem likely to announce itself is a loud, vibrating drive. If you
notice your drive making more noise than usual or making the
whole laptop tremble, stop what you’re doing and hit the eject
Hardware Systems Troubleshooting
74
button. The usual cause is an off balance disk, either because it
was seated wrong in the tray, was manufactured poorly
(especially stick on labels), or has some foreign matter stuck to
it. It’s not worth destroying your drive trying to read a shaky
disc. If you must try, do it in a PC drive that’s built heavier and
is easier to replace if the disc comes apart. Note also that some
laptops offer a “quiet drive” feature so it won’t be a distraction
while playing entertainment discs, which should be turned off
while troubleshooting.
Recording problems are occasionally related to hardware
failures, but more often than not, they are due to the user
stubbornly trying to record on some faulty media. Software
problems or protection schemes involved in duplicating
manufactured discs are also a leading cause of failed recordings.
Never give up on a recorder based on one stack of “100%
guaranteed” blank discs purchased on a spool. Try a fresh disc
from a friend, and ask the friend to test one of your discs. If your
drive refuses to acknowledge that you’ve inserted a disc suitable
for recording, the disc may be the wrong type, it may be
recorded and closed already, or it may be faulty. If it’s the
cheaper unlabeled media, you may even be installing it in the
drive upside-down.
If your recording sessions take forever to start, make sure
that your virus software isn’t scanning every file before it can be
prepared for writing to the disc. If your recording sessions
always end in failure, it could be the media, but more likely it’s
caused by the drive buffer running out of data because the
laptop CPU is busy with other tasks. Try recording first thing
after you turn on the laptop, with your Internet connection
disconnected (turn off wireless or unplug your laptop from the
modem/router). Before attempting the third or fourth time, use
task manager to check the CPU utilization, and stop other tasks
that are running and eating up resources.
A particularly frustrating problem is when your DVD/CD
drive refuses to boot an operating system disc or recovery disc
after a system failure. Check that the disc is bootable in another
computer. If the disc is good, try changing the boot order in
CMOS Setup so that the DVD/CD drive is checked before the
BIOS hands over control to the hard drive. This is particularly
effective if a virus or data corruption has rendered the hard
The Laptop Repair Workbook
75
drive partially bootable, so the laptop keeps trying the hard
drive but never fully succeeds. If the DVD/CD drive is good, it
will boot bootable discs, so assuming the disc is clean and
bootable, proceed with troubleshooting as if it were a normal
read failure.
Troubleshooting Laptop Sound
If you can’t get any sound out of your laptop, the most likely
cause is the volume being turned down or muted. Newer laptops
monitor the exterior sound control so when the volume is
turned up or down manually, the volume control in the
operating system tracks right along with it. But with some
laptops, especially those with exterior dial volume controls
rather than toggles, the volume dials are independent of the
software volume control and can’t be monitored in software. In
this case, if the volume dial is turned down on the outside of the
laptop, the sound is turned off and no amount of monkeying
around in the operating system can change that.
Unfortunately, checking the external volume control on
the laptop and the standard laptop volume slider in the
operating system (the icon is a little speaker in Windows system
tray) doesn’t eliminate all volume problems. Depending on the
software installed and what you are trying to do, there may still
be multiple volume controls and mixer panels scattered about
the operating system. If the wrong channel is muted or turned
down all the way in one of these independent controls, the
laptop isn’t going to produce sound. The first sign most laptop
users get that their audio isn’t working is the absence of
operating system sounds, like the Windows rush on start up, or
chimes with e-mail activity. Of course, these sounds can be
turned off by design as well, through the Sounds option in
Windows Control Panel. So, before looking at hardware
problems, another hunting expedition is necessary to make sure
the software is supposed to be playing sounds.
If you try to play an audio CD and the media player shows
that the song is progressing but you can’t get any sound out of
the laptop speakers, odds are that the volume is turned down or
muted. But occasionally, the onboard sound hardware will fail.
If you are confident the volume is turned on in all possible
locations and you’ve checked Windows Device Manager for a
Hardware Systems Troubleshooting
76
report of a hardware failure, try listening through headphones.
Laptops are all equipped with external audio jacks for a
microphone and headphones, and some might include an
additional jack for “line” to pass the playback to a home
entertainment system. If the headphones work, the wiring to the
internal speakers has broken or come loose. Wiring failure is
only likely if the speakers are in the lid and therefore wired
through the hinges.
If you don’t get any sound out of the headphones and you
haven’t missed a “mute” being checked off somewhere in
software controls, it really is a hardware failure. If the problem
is with all sounds, including Windows chimes, internet radio,
etc, then the problem is that the integrated sound processor has
failed. Unless the sound system is on a daughter card, it means
the fix would require replacing the motherboard. But if the only
thing you can’t do is play audio CD’s, the problem is that the
output from the DVD/CD player is muted or not getting to the
amplification stage.
In modern laptops the DVD/CD players feature Digital
Audio Extraction (DAE) which means that music CDs can be
read digitally and the data passed to the built-in sound card or
an external sound card replacement. In older laptops, music
CDs weren’t digitally “read” by the system, they were played by
the CD player, which produced an analog sound output that was
passed to the laptop’s sound system for amplification. With both
the old and the new players, if there’s a problem with the
DVD/CD connector or if the wiring has been damaged, the
music CD may get spun around without the sound making it to
amplification. With the old fashioned players, if the little D/A
(Digital/Analog) converter chip in the DVD/CD player is blown,
the only way you’ll be able to play music CDs is to replace the
drive. The modern DAE output rarely fails on the drive, but the
connector can fail. Make sure that digital playback is enabled in
the properties tab of the drive.
You can replace your built-in laptop sound card with a PC
card, with a USB sound card or USB speakers. The main
audience for laptop sound card replacements is people who want
to turn their laptop into a home entertainment center, with 5.1
or 7.1 surround sound. For our purposes, these replacements
make good workarounds if the integrated audio system fails.
USB speaker workaround:
speakers.htm
The Laptop Repair Workbook
77
They also bring with them a whole new level of software with
more volume controls, which hopefully is well integrated with
the existing operating system software. When shopping for
replacement sound cards, keep in mind that USB solutions are
much cheaper than PC cards. You need a laptop PC card, not a
sound card for a PC, which will usually be PCI technology. The
laptop peripheral manufacturers who agreed on the name “PC
card” for a laptop add-on did a disservice to consumers the
world over who have doubtlessly made uncounted purchasing
errors. Also, when purchasing USB speakers to replace the
laptop’s sound system, don’t buy speakers advertised as “USB
powered”. The “USB powered” speakers only draw their power
from the USB port, they still need to be plugged into a regular
audio jack to play anything.
Microphones and headsets have become an important
part of laptop sound systems with the rise of Internet telephony,
video conferencing and voice recognition. The quality of the
microphone input depends both on the microphone itself and
the integrated laptop sound card. If you’re using a good
microphone and you just can’t get the quality or volume you
need for your application, the laptop sound card hardware is
probably at fault. It’s not a failure per se, as long as it functions
well enough to play music CDs and operating system sounds. It’s
just not good enough for your application. The two options are
to purchase a quality USB microphone system, which effectively
bypasses the laptops built-in sound system, or to go with a USB
or PC card replacement sound card and plug in a regular
microphone.
Wired Network Troubleshooting
Given the WiFi capability built-into modern laptops it may seem
unnecessary to discuss wired LANs (Local Area Networks) in a
laptop book. In fact, most of the troubleshooting steps in the
accompanying flowchart are primarily intended for medium
sized business or wired school networks. Many employees today
are commuting with machines owned by their employer, which
plug into wired networks when at the office, and not a few
people are adding the laptop to an existing home office LAN that
also supports desktop PCs and printers. Yes, one solution is to
add a wireless router to the LAN, and then connect the laptop
via wireless. But this means buying and configuring a new piece
Hardware Systems Troubleshooting
78
of equipment, and from a security standpoint, a wired LAN is
safer because physical access to the building is required to
intercept traffic. Also, wired network connections remain much
faster than standard WiFi connections, provided all of your
network hardware is up to date.
The main culprit with wired networking is the wiring, or
more specifically, the RJ-45 connectors that look like overgrown
phone connectors on the wire ends. RJ-45 connectors are in
reality overgrown phone connectors, and they have taken over
the networking field to the extent that we don’t even talk about
older coaxial networking or corporate fiber optic cabling in this
section. The RJ-45 connectors are universally crimp-ons. As
there’s no soldering or clamping involved, the connection is only
as good as the crimp. There’s a crush-in stress relief on the
connector to help keep the conductors from moving around on
the crimp contacts when the cable gets tugged on.
One of the winning points of twisted pair networking was
its flexibility and ease of installation. Pull a standard wire, crimp
on a connector, and you’re done. But the very flexibility of the
system leads to people pulling on the cords, flopping them over
desks, forgetting they are attached and trying to move the
laptop. This can cause the port to break off the board inside the
laptop, or it may weaken the connector. Cheap crimping tools
have encouraged many people to make their own cables, without
ever learning how they are supposed to be made. At the core of
twisted pair networking, whether 10BaseT, 100BaseT or
1000BaseT (Gigabit), are twisted pairs of wire which provide
electrical insulation from noise by carrying differential signals
(the noise cancels out). If you don’t make the cables properly,
the network may limp over very short distances at low speeds,
but will fail on longer runs or higher speed.
In addition, there are statutory length limits for different
types of twisted pair networks. You can’t reel out a half-mile of
cable, put connectors on the ends and expect it to work. The
maximum length specified is one hundred meters, or a little over
300 ft. You might squeeze out a little more distance with a high
quality cable in an electrically quiet environment, but the
signaling strength isn’t engineered for long distances. The
slower the network, the more tolerant it will be of poorly made
cables, pair splitting and failing connectors. Some networking
The Laptop Repair Workbook
79
adapters and hubs will automatically lower the connection speed
under poor conditions, but it’s not a situation to aspire to. Better
to just fix it and run at the hardware’s maximum speed.
Network adapters, routers and hubs are equipped with
LEDs that show the link status and activity. Don’t assume that
because a hub or a router is working with other computers and
the link LED for your cable is lit, everything must be OK.
Individual ports on hubs and routers can fail with the link LED
remaining lit, so try another port, even if it means temporarily
disconnecting another computer. Positive link status just means
there’s a cable attached between the hub port and the laptop and
it’s not broken. But that LED is a useful tool. If you see the green
link LED flicker when you wiggle the wire at either end, it’s a
sign that either the RJ-45 connector is loose, or the port in the
laptop or the hub or router is bad.
Moving past hardware issues, software is the crazy aunt
in the wire closet of networking. In the absence of expert help,
your best bet is to find a similar machine on the network, ideally
running the same version of the operating system, and clone the
settings it’s using. The exception is if the network is set up with
fixed network addresses, in which you’ll need to get your full
designated address from the network administrator, which is a
good time to ask for help. The problem could be as simple as a
mistyped workgroup name on a peer-to-peer network, or
misspelling the username or password received from the
network administrator on a business network.
The most common wired networking connection in the
home is between the laptop and the high speed modem/router.
Some Internet service providers don’t supply free wireless
routers, and some users prefer the security of a hard wired
connection and turn off the router’s wireless capability. If you
can’t access the Internet through your direct network connection
to the router, it’s very possible that the router itself has lost
contact with the Internet and needs to be reset.
Troubleshooting Keyboard, Pointer and USB
Perhaps the most important thing you can learn about your
keyboard, touchpad, and even your USB ports, is that they can
all be bypassed. Most laptops offer either a PS/2 or proprietary
Laptop key
replacement:
laptop15.htm
Hardware Systems Troubleshooting
80
port for an external keyboard and mouse (it may have to be
manually enabled in CMOS Setup), and you can always buy
inexpensive USB keyboards, mice, and other pointers to use. If
all of your USB ports should fail (a very rare occurrence) you can
buy a replacement USB adapter as a laptop PC card. If the
problem is with the USB ports being mechanically broken inside
the laptop by repeated abuse, you can still use the integrated
USB through a port replicator or docking station. So the bottom
line is, you don’t have to rush to replace your laptop keyboard or
pointing device should the hardware fail or simply wear out.
You may notice a problem with your keyboard when
some repeated characteristic spelling error appears, like you
keep on leaving the letter “a” out of words. After a while, you
figure out that you’re spelling them right, it’s just that hitting the
“a” key doesn’t always result in an “a” showing up on the screen.
The spills and crumbs that get into the keyboard and remain
there often gang up with lint and hair to gum up the workings of
certain keys. As long as the problem is with foreign matter
gumming up the retaining clip that holds the key in place and
not with the actual key contact, which is sealed within the
keyboard membrane, you can fix it. That is, provided you can
figure out how to remove the key with destroying the retaining
clip, and you have good enough manual dexterity to put it back
together again after you remove the built up crud.
The difficulty of replacing the entire keyboard membrane
(the keys come attached) varies from laptop to laptop,
depending on whether you can easily access it from the top side,
without messing with the hinges. If the keyboard disappears
entirely from Device Manager it could indicate that that the
motherboard controller has failed, in which case, investing in a
replacement membrane is a pretty big risk. A warning in Device
Manager may also indicate that the ribbon connector has come
undone or failed, though that’s pretty rare unless you’ve had the
laptop apart. The replacement membrane with keys usually
costs less than $100, but if you normally use the laptop in one
location and you don’t have any repair experience, it’s less risky
to just start using a USB keyboard. Probably the handiest laptop
accessory around is the USB splitter, which allows you to plug a
standard mouse and keyboard into the laptop, rather than
buying expensive versions with proprietary connectors from the
manufacturer.
The Laptop Repair Workbook
81
More laptops come equipped with a touchpad than any
other pointing device. Touchpads can take a while for new users
to get used to, and they tend to come overloaded with shortcut
commands. If you’re getting frustrated with your touchpad
because it keeps launching applications when you’re just trying
to move the pointer on the screen, you need to adjust the
software settings. There may be a touchpad icon with all the
options in the system tray, and you can always find it in
Windows Control Panel. Many users are most comfortable with
all of the extra functionality disabled, including tapping on the
touchpad to click the mouse. If the physical buttons for clicking
don’t work as you expected, their functionality can also be
changed in the touchpad settings. If neither the buttons nor the
touchpad work at all, make sure they are enabled in software. If
Device Manager can’t see the touchpad, there’s a good chance
the controller has failed or the cable has worked off.
USB is one of the great successes of modern computer
standards, allowing manufacturers to design tens of thousands
of different products that can be attached to your laptop by one
standard cable to a standard port. If it wasn’t for the software,
USB would be practically idiot proof. Unfortunately, the USB
interface only provides the path for the laptop and the attached
device to talk to each other, the software still has to be right for
the conversation to make any sense. The first step in
troubleshooting USB problems is to simplify the setup. Plug the
device directly into a USB port on your laptop, without daisy
chaining through other USB devices, hubs, docking stations or
port replicators. Once you get it working, you can try a more
torturous cabling route and find out if there’s a problem
somewhere in the middle.
The majority of USB ports on laptops in use today are
either USB 2.0 or USB 1.1, a successful earlier version. USB 2.0
is much faster than USB 1.1 and handles power differently, so
some devices sold for USB 2.0 will not be backwards
compatible, and will work very poorly if at all. All USB 1.1
devices should work on USB 2.0 ports, and the new USB 3.0
ports should be able to handle all of the older devices as well.
The higher the communication speed of the device, the more
important you use a quality cable. The USB port and cable
wiring is actually quite simple, a ground, a +5.0 V power supply,
USB splitter for
laptop:
r_usb.htm
Hardware Systems Troubleshooting
82
and two signal conductors carrying a differential (plus and
minus) signal for noise isolation.
The main hazard to USB ports is that the cables end up
end up all over the place and get yanked on. People can trip over
them and you may jerk the laptop around moving your feet
under the table. The worst punishment for the USB port is if you
forget that you have a USB cable plugged into the laptop, close
the lid, and trying to walk away with it. This abuse can lead to
broken solder joints inside the laptop, and bent ports that only
create the proper connection if you hold the cable just so. If the
USB port feels loose inside the laptop, it’s broken. The whole
laptop is put in danger if somebody trips over the cable and
pulls it off the table. The cables themselves are fairly bullet
proof, normally inflicting more damage than they absorb, but a
high heeled shoe or desk drawer can damage a cable and break
the conductors. So you shouldn’t assume a cable is good unless
you’ve tested it with another device on your laptop, and
remember that cheaper cables may work with older USB
standards but not the new faster ones. Never try using a USB
cable if the plastic spacer in the connector is missing. It can
short out the port and damage the motherboard.
Laptop Won’t Power
Up With AC Adapter
Laptop
power LED
on?
LED
winks if
wiggling
cord?
Plug directly
into good
outlet
Live
AC?
Internal
power jack
loose?
Beeps
multiple
times?
Check web
for your BIOS
beep codes.
Normally
requires board
level repair
DC
voltage with
connector cut
off?
Replace AC
adapter brick
Reseat
battery,
replace if it
causes
failure
Shows
momentary
life?
Hear
fan or hard
drive?
Feel
action on
switch?
If same failure repeats
in future, consider glue/
epoxy on connection
DC
voltage good
at output?
Yes No
No Yes
Yes
No
Yes
Yes
No
No
Yes
No
Yes No
Yes
Yes
No
No
Yes
Switch failure
usually comes with
a change in the feel.
Test switch with
continuity meter. If
switch is good,
continue to right
Use VOM on
DC setting,
not tongue
Solder on new
connector
Yes
DC
connector
broken?
Yes
Power up
no battery?
No
Short,
spark on
DC jack?
No
Inspect boards
for burnt or melted
components, cold
solder on DC jack,
open connections,
unseated cards
Disconnect internal
drives and connectors
one at a time until
subsystem with short
identified. If power input
still a short with bare
motherboard, replace
motherboard
Check owners
manual, not all
laptops can
be operated
without battery
Solder new DC jack
on motherboard
Replace
connector on AC
adapter output
No Yes
Boots if all
devices unplugged?
Determine
which
connection is
causing
problem by
reconnecting
devices one at
a time
Yes
No
LCD
failure
chart
No
Redo
internal
connections
fix?
Yes
No
Warning: Use
continuity meter to
test for short. Do not
repeatedly plug in
sparking power
Laptop Won’t Power Up With AC Adapter
84
The Laptop Repair Workbook
85
LED
winks if
wiggling
cord?
Laptop power LED on? Laptops come equipped with a series of
LEDs, often above the keyboard or on the front edge, that
display the status or activity of laptop sub-systems. There are
normally separate LEDs that will light when the AC adapter is
plugged in, when the battery is charging, and when the laptop is
powered on. In addition, there may be LEDs for hard drive and
wireless activity and for DVD or CD action. Some laptops even
feature a power button that lights when the power is turned on.
In this particular diagnostic step, we're interested in the LED
that shows that external power is connected, which is
occasionally the same as the LED that shows the battery is
charging. These are the only LEDs that should be lit when the
laptop isn't turned on but is plugged into a live AC adapter.
LED winks if wiggling cord? If the LED showing that power is
connected or that the battery is charging winks and blinks when
you wiggle the cord plugged into the laptop, you have a bad
electrical connection. The result is often that the power supplied
is too intermittent to charge the battery or carry the system
though a power on cycle, unless the cord is in the perfect
position. If the LED blinks or flickers when you aren’t wiggling
the cord, check the owner’s manual for what it’s trying to tell
you. It could indicate a bad or unrecognized battery, or a
problem with the AC adapter output. While you will test for
these as you go along, checking the manufacturer user manual
first can save you time.
Internal power jack loose? In cases of total failure, it's usually a
broken center pin or a failed solder joint on the board. This can
even happen with relatively new laptops if the solder joint was
poor quality to start with and the high electrical resistance led to
further overheating of the joint until it failed. But the most
common reason for mechanical failure of the power jack inside
the laptop is unintentional abuse. Problems include: pulling out
the connector at an angle when disconnecting the power,
careless movement of other items on the desk pulling the cord
around while it's plugged in, dropping the laptop with adapter
attached or stepping on the cord.
Simply letting the cord droop all of the time if you work on your
lap is much more likely to lead to the failure of the external
connector than the internal port. The easiest way to test if the
connector on the end of the AC adapter cord is failing is to
measure the DC output while having somebody wiggle the cord.
Laptop
power LED
on?
Internal
power jack
loose?
Laptop Won’t Power Up With AC Adapter
86
Beeps
multiple
times?
If you have alligator clips for your test leads, you can do this
yourself. Failures are almost always gradual, where the laptop
will operate and charge fine as long as you position the cord
properly to keep the LED lit, but this gets more and more
difficult with time as additional strands of wire break.
Beeps multiple times? Laptops, like desktop PCs, go through a
POST (Power On Self Test) process when turned on. If the POST
carried out by the BIOS detects a failure, it may report the
failure through a series of beeps, whether or not it can light up
the screen. These beep codes are specific to the BIOS
manufacturer and are sometimes proprietary to the laptop
manufacturer or model as well, but you can usually find out
what they signify by Googling "Beep Code" and the brand and
model of your laptop.
The downside to beep codes is they often identify problems that
you can’t fix. The most common beep code that you can do
something about is RAM failure. If you get a beep code you can’t
identify and nothing seems to work, the first step is to reseat the
memory module(s). If you have more than one memory module,
try operating with just one, and then just the other in the first
slot. You might want to gamble on buying a new memory
module, using an online configurator to pick the correct module
for your model, as they are pretty inexpensive. Other beep code
failures are generally related to surface mount processors that
can’t be repaired at home, though some people have had luck
with reflowing solder on video processors, using various novel
techniques. If you determine you have a video processor failure
on the main board and you’re feeling adventurous, do a Google
search on “reflow solder” and your model.
Boots if all devices unplugged? One of the easiest power
problems to troubleshoot is when an external device, such as a
printer, a network connection, a PCMCIA (Personal Computer
Memory Card International Association) or PC card, video
monitor, or even a JumpDrive or USB mouse is preventing the
laptop from powering on. This may occur due to a short circuit
or electrical problem in the external device or due to a problem
with the mechanical movement of the port inside the notebook.
It can be easily diagnosed by removing all external devices
(except the AC power adapter).
Boots if all
devices unplugged?
The Laptop Repair Workbook
87
Hear fan or hard drive? When one or more status LEDs on the
laptop are lit, it may be that the basic power circuitry is
functioning, but the boot process is being aborted before it even
starts. If you can hear the hard drive spinning up or the CPU fan
come on and stay on, or if the hard drive activity LED blinks
away merrily, there's a good chance that the problem is isolated
to the video display subsystem. One quick check is to attach an
external monitor, though you may have to use a key
combination, normally the master Fn (Function) key along with
one of the other keys along the top of the keyboard, to tell the
laptop that you want to enable the external video port.
Shows momentary signs of life? Does the hard drive spin up and
stop, or can you hear the fan click on and off? Do the LED's
change state when you press the power button, even for a
moment? Does the screen show any changes, even just a passing
ghost of an image or some bright spots along an edge? All of
these may be signs of trying to power up with a battery that’s
stone dead or has suffered an internal failure, with a laptop that
shuts itself down on “abnormal” battery conditions.
It could also be the sign of a nearly discharged battery combined
with a faulty AC adapter or charging circuit. Some people have
reported problems with generic after-market AC adapters that
are only capable of charging the battery when the laptop is
turned off. Due to low voltage or insufficient current, they
simply won’t operate the laptop on their own unless a charged
battery is supplementing the power.
Feel action on switch? Notebook switches vary as much as
keyboards in feel, but you should feel some initial resistance
when you press the power switch, and there should also be a
tactile switching feel. If that feel is absent or if the switch moves
up and down loosely, it's probable that the switch has physically
failed. Unfortunately, there's a lot of taking apart involved to get
at and test the switch in most laptop designs. Fortunately, it's
not a common failure.
Redo internal connections fix? Laptops get moved around,
vibrated, bounced about and even flexed far more than desktop
PC's. While laptop manufacturers use specially designed
connectors, tape, and stress relievers to counter vibrations, it's
not uncommon for connectors to work free. Find an illustrated
guide that details how to open up your specific model of
Hear
fan or hard
drive?
Shows
momentary
life?
Feel
action on
switch?
Redo
internal
connections
fix?
Laptop Won’t Power Up With AC Adapter
88
notebook (there's a lot of variations and tricks), take it apart,
remake the connections, and put it back together again. If it
works, but fails again at a later date, try to determine the exact
connection that’s failing by process of elimination. If you
determine that a particular connection is prone to work itself
loose, you can (out of warranty laptops only!) attempt to use an
epoxy or mechanical restraint to hold it in place.
DC voltage good at output? The AC adapter for your laptop
power supply transforms and rectifies AC to DC. The ratings for
the DC output are printed on the label, 15V at 3.0 A, 19V at 2.0A,
depends entirely on your model and the voltage of the battery
used (the charging voltage has to be higher than the battery
voltage). You can't play a mix and match game with AC
adapters, it has to be the right voltage, supply enough current
and have the exact barrel connector (inside and outside
diameter and overall length) or it may cause damage or simply
not work.
It's easy to check the voltage with an autoranging VOM, for nonautoranging
meters, use the 20V range on the DC scale. While
checking the voltage doesn't confirm that the transformer is
supplying the required current, it's not as tricky as checking
battery voltage where a surface charge can trick you into
thinking a bad battery is good when no load is present. The
voltage you read should be the same or a little higher than the
voltages printed on the label. You can't confirm this by checking
the DC plug with your tongue, and you may end up getting some
spit in the connector that shorts out the whole works when you
plug it back into the notebook. Be careful when one probe is
inside the connector not to let it contact the probe on the outer
conductor, or you’ll short the AC adapter. Aside from the sparks,
this could damage the AC adapter or the meter.
DC connector broken? The center pin of the DC barrel connector
inside the laptop is a very common failure, sometimes breaking
off altogether if the laptop is dropped while plugged in or if
somebody trips over the cord. Note that some laptops are
designed with the center pin as part of the AC adapter cord end.
If the pin is missing but you’re still getting intermittent power, it
must be stuck inside the connector coming from the AC adapter
and making contact with the broken part on the inside when it's
plugged in tight. If the pin is loose to the touch, if it moves easily
when you nudge it with a pencil point or a toothpick, it's
DC
voltage good
at output?
DC
connector
broken?
The Laptop Repair Workbook
89
probably hanging on by a thread and responsible for
intermittent or limited power. The contact for the outside of the
barrel can fail as well, especially if there are a limited number of
solder points.
Replacing the connector inside the laptop, whether it's on the
motherboard or on a special power regulation board, is one of
the most labor intensive repairs a relative newbie can hope to
carry out successfully. You need a lot of patience to disassemble
the notebook to the point where you can desolder the old
connector with a quality soldering iron with a fine tip. The
connectors themselves can usually be found online for cheap,
though an increasing number of laptops use proprietary
connectors that can only be obtained from the manufacturer,
who wants to sell you a whole new AC adapter if the cord fails. If
you’re very unlucky, the circuit board to which the connector is
soldered may have broken in a drop, for which the only fix is
replacing the whole board.
Power up no battery? If the laptop powers up with the battery
removed, you've either got a bad battery or a problem with the
connector in the battery compartment. Visually inspect the
battery for damage and don't even try plugging it back in if it
shows any signs of bulging, leaking or melting. Inspect the
battery connector on the battery and in the battery
compartment for signs of discoloration, misalignment or melted
plastic on or near the pins. Some laptops won't operate without
a battery installed, and any laptop that relies on the battery as
part of the power supply conditioning circuit might be damaged
by operation on poorly regulated power when the battery isn't
installed. If the laptop does power up without the battery and
the manufacturer or documentation confirms that battery-free
operation is acceptable, you can treat it like a portable desktop.
Otherwise, you can purchase a replacement battery, but the
problem may turn out to be with the charging circuitry. Always
check if your battery has been recalled before even thinking of
purchasing a replacement.
Short or spark on DC jack? If you get a spark when you go to
plug the DC output of the AC adapter into the laptop, remove it
immediately and start looking for the short. Even if it doesn’t
spark, it’s a logical step to check for a short circuit on the power
input when you get no power LED on the laptop with a live AC
adapter. If you have a dead AC adapter around, you can cut the
Power up
no battery?
Short,
spark on
DC jack?
Laptop Won’t Power Up With AC Adapter
90
DC connector off, strip the two leads, and use the connector with
the lead to test for a short with a meter set to continuity, or
Ohms, if the meter lacks a continuity setting.
Assuming you don’t have a spare lead, you can usually still check
for a short without taking the laptop apart by measuring from
the inner pin on the DC jack in the laptop to the metal on any of
the laptop ports, which should be ground. If you have one of
those odd laptops where the center conductor is ground, this
will give a false indication, so make sure you check the polarity
of the jack by testing the voltage coming from the AC adapter.
You want the positive lead of the voltmeter (red) to contact the
inside of the connector, and the ground (black) to contact the
outside, and the readout to show the correct positive voltage. If
it shows the voltage as negative, either the leads are plugged into
the meter wrong or the DC connector carries the positive on the
outside of the barrel.
The easier components to remove usually include the hard drive
and the optical drive (DVD or CD), though it will be necessary to
disassemble the laptop to remove them with some makes and
models. Stripping the laptop down to its bare components is one
step beyond simply disassembling and reassembling all in one
step in an attempt to repair any faulty connections. If you keep
your continuity meter connected by way of a spare lead or
alligator clips on the inputs, you’ll know the minute you solve
the short. But if you insist on trying to find a short without a
meter, it’s best to strip the laptop down to nothing but the
motherboard and video connections before trying to power it up
again. Visually inspect the motherboard for damage before you
apply the power.
If there’s no short or sparks, the power problem in your laptop is
likely related to an open circuit, due to a failed connection,
broken trace or a burnt out component. One of the more
common and easiest problems to diagnose at this point is a cold
solder connection right at the DC input. It could be that the
solder joints are physically sound enough so that the jack
doesn’t move around, but aren’t conducting electricity, which
you can check with a continuity meter or by measuring
resistance on the Ohms scale. One of the connector conductors
should be in continuity with any ground point in the laptop, or
measure less than an Ohm, and the other conductor should have
continuity to the circuit board trace for it, or to the positive leg
The Laptop Repair Workbook
91
of the next component the power reaches. If it’s not a failed
solder joint, check all of the components for visual signs of
damage, reseat any daughter cards and connections, and try
powering up again.
Live AC power source? You don't need a voltage meter to check
for good AC power. Just unplug the AC adapter from the outlet
it's in and plug in a lamp. If the lamp works, the power to the
outlet is good, if not necessarily polarized correctly. Don't
assume that because the light is flickering merrily away on a
power strip that the power to the outlet you are plugged into on
the strip is good, or that any of the outlets on the strip are good.
Power strips have gotten so cheap that it's not uncommon to
find multiple outlet failures on them.
DC voltage with connector cut off? If you've confirmed with a
known good voltmeter set to the right scale that the DC
connector on the AC adapter isn't putting out any voltage, you
have nothing to lose by unplugging the AC adapter and cutting
off the DC connector six inches or so before the connector end.
Strip the end of the DC output cord still attached to the AC
adapter, make sure the ends are separated when you plug the AC
adapter back in, and check for DC voltage across the exposed
ends. If there’s no voltage, it's time to buy a new AC adapter. If
the proper voltage is present, you'll need to buy a new connector
and solder it onto the cord or make up a new connector with two
leads and splice it onto the cord. You can order the connector
ends online if you know exactly the size you need (may be shown
in the manual for your laptop if you have it available or can find
it online) but you can also bring the cut-off connector to a Radio
Shack or electronics store and match it by eye if it’s a basic, two
conductor barrel connector.
Live
AC?
DC
voltage with
connector cut
off?
Laptop Won’t Power Up With AC Adapter
92
93
Laptop Battery
Failure
Needs
AC adapter
to boot?
Runs down
too quick?
AC
adapter
noisy?
All batteries
heat up charging,
but not too hot to
touch
Live
longer in
CMOS
Battery
ages too
quick?
OS
battery
management
active?
DC
voltage
good?
No Yes
No Yes
Yes No
Yes No
Yes
Yes
No
No
Yes
Replace
adapter if too
annoying or
fails to charge,
but buzz or
high pitched
tone not
unusual
Measure DC
output of AC
adapter,
compare to
brick label
No
LED for
charging lit
steady?
See manual for LED
colors or blinks pointing
to battery problem or
charging failure
Yes
Does
battery get
hot?
No
Latch
locks
tight?
Yes
Battery must be
installed properly
both to charge and to
operate laptop
Unless maker
warns against, run
without battery
when AC available.
Li-Ion batteries
good 300 to 500
cycles, older types
suffer memory
No
No
User
condition
battery?
Attempt to
recondition
Either aged
battery not taking
a full charge, self
discharging, or
some hardware
Yes overdraw
Check CMOS
that PnP OS and
ACPI enabled
Yes
No
With ACPI, battery life,
CPU performance, LCD
brightness, etc, all can be
adjusted in a trade-off
Power
failure
chart
Charges
in CMOS
Setup?
No
AC adapter
could be failing or
underpowered
Yes
Charges
with laptop
off?
Software
problem in OS
management
Yes
No
Visual
inspection
pass?
If battery shows signs of
overheating, bulging or leaking, don't
try in another laptop. If the bay
contacts are clean and undamaged,
can gamble on a new battery
If the battery bay and the battery both
look clean and undamaged, try charging
battery in an identical laptop or borrowing a
battery to try. Charge LED may have lied
and power board or AC adapter failed
Yes No
Laptop Battery Failure
94
The Laptop Repair Workbook
95
Needs AC Adapter to boot? The first step in troubleshooting
your laptop battery is determining whether it can hold enough
charge to boot the notebook. Will the laptop power up and run
on the battery, or does the AC need to be plugged in all the time?
Modern notebooks usually have a whole array of status LEDs
that will tell you if the laptop senses good power coming from
the AC adapter and whether or not the battery is charging.
Unfortunately, there's no universal standard for these LEDs,
their colors or their actions. Note also that we're using the term
"boot" rather loosely here. If the laptop powers up on battery,
you can hear the fans and the drives, but you don’t get a live
LCD, or fail to reach the operating system splash screen, you
should start your troubleshooting with the LCD or hard drive.
Runs down too quick? This is the main problem laptop owners
complain about, and often for good cause. Older laptops using
Ni-Cad and early Ni-MH batteries ran for 2.5 to 3.5 hours when
brand new, but often within a few short months could barely
keep the notebook powered up for an hour. Newer laptops using
Li-ion batteries are much better, normally holding onto a three
or four hour life through hundreds of charge and discharge
cycles. The first line of defense battery manufacturers employ
against complaints about battery life is, "Did you charge and
operate the battery according to the manual?" Unfortunately,
different laptop manufacturers disagree over how to best treat
batteries of the same technology, and some of the differences
extend to various models from the same manufacturer.
Unless you have a very old laptop, the battery is actively
monitored and managed by the operating system software. This
means if there’s an error in how the operating system sees the
battery, whether due to hardware or software, you may get
critical warnings and automatic shutdowns even if the battery
isn’t truly reaching a state of total discharge. One test for this is
to temporarily change the action that accompanies the “critical
battery alarm” in the battery management software from
“hibernate” or “shut down” to “no action.” If you get a critical
warning, and then the laptop merrily works away for another
two hours, you’ll know the battery and the charger are working,
but there’s a software management problem. But you need to
resolve the problem rather than just running that way or you’ll
risk losing work and possibly introducing data errors when the
battery really does start running out of power and the system
experiences a sudden brown-out.
Needs
AC adapter
to boot?
Runs down
too quick?
Laptop Battery Failure
96
User Condition Battery? Purchasers of brand-new laptops are
often surprised to find the battery is dead, or runs down very
quickly. Even if the battery was fully charged when the laptop
was boxed for shipment, that box may have been sitting in a
warehouse for six months or a year before you purchased it in a
store. That’s more than enough time for a notebook battery to
self-discharge, even if it's not being drawn upon. If the battery
isn't new, and you just received the laptop as a hand-me-down
or purchased it second hand, there's no reason to expect that a
short battery life is due to anything other than an aged battery.
We strongly advise against trying any Internet inspired hacks for
bypassing the built-in safety mechanism of Li-ion batteries
unless you are a battery technologist yourself. The so-called
“fuel gauges” or “odometers” that may prevent Li-ion batteries
from accepting a charge after a fixed number of cycles are there
to prevent overheating and fire risk as the battery’s chemical
composition changes with time.
Battery conditioning means training the individual battery cells
into a pattern of giving as much power and accepting the largest
charge that they can. It would take an advanced chemistry text
and a much smarter author to describe the underlying reasons
for battery memory, and the techniques for best charging and
storing batteries sometimes contradict one another. Once a
laptop battery pack is conditioned, you may still need to run it
all the way down once a month for best performance, especially
if you normally work with the laptop plugged in. It's important
to read the owner’s manual section on battery life, because
different models ship with different battery technologies, and
the best practices to extend the battery life may not be the same.
You can try to recondition the battery (check the laptop
manufacturer website for reconditioning software or
instructions), but odds are the battery simply can't hold a charge
the way it did when it was new.
Some manufacturers may condition the battery before
installation in the laptop, others expect you to read the owner’s
manual instructions and do it yourself in the first few days you
own the laptop. The most general procedure is to charge the
battery fully before use (leaving it on the AC battery charger
overnight is best), and then to run exclusively on battery until
the battery is discharged. Some brands suggest you run until the
operating system warns of low battery life remaining, which
could be anywhere from 10% to 3% remaining, on standard
User
condition
battery?
The Laptop Repair Workbook
97
settings. Others recommend that you run the laptop until it
shuts itself down. This doesn't mean that you have to sit there
working for three or four hours, you can run the battery down
over multiple sessions over multiple days. The important thing
is not to plug the AC power adapter back in and start recharging
the battery until it is completely run down. The conditioning
process may require you to go through this cycle three times in a
row.
Battery ages too quick? If the laptop's battery life has been
slowly degrading over time, it's probably operating more or less
in accordance with plan, but if you find the operating life
shortened by more than 20% or 25% within the first few
months, there's likely something wrong. Ni-Cad and Ni-MH
batteries can be "trained" to perform poorly through non-ideal
usage patterns, and it usually helps if you run them all the way
down once a month or so to prevent the worst charge memory
issues. Some manufacturers of laptops using the new Li-ion
technology encourage users to leave the batteries installed at all
times, even if the laptop is almost always running on the AC
adapter, while other manufacturers recommend removing the
batteries and storing them somewhere cool when not needed for
mobile use. Read your manual.
Live longer in CMOS? This is one of the few diagnostic tests for
a battery you can do at home to find out if your battery life
problem is due to hardware (the battery itself or the charging
mechanism) or to the way the laptop is being operated. Enter
CMOS setup immediately after turning on the notebook with a
fully charged battery. Once you bring up the main CMOS Setup
screen, start timing how long it takes the laptop battery to run
down. If it doesn't outlast the battery life under regular usage by
a good margin, the short battery life is probably due to a faulty
battery or a hardware failure that causes the laptop to
continually suck power when it shouldn't.
AC adapter noisy? This is one of those problems that tends to
bother young women and children more than men, because men
lose their high frequency hearing at an earlier age than women.
AC adapters typically include a transformer and some power
IC's, at least a bridge rectifier and some capacitors. There's a lot
of potential for humming and whistling with transformers, but
they can go on operating that way for years without failing. If the
AC adapter gets burning hot as it whistles away, or starts to
Battery
ages too
quick?
AC
adapter
noisy?
Live
longer in
CMOS
Laptop Battery Failure
98
smoke or smell, then pull the plug from the wall and buy a new
one. In all cases, the acoustic behavior of your AC adapter may
naturally vary with the quality of the power from the utility, and
the feed voltage if you are traveling. Anytime you can avoid
running a computer on poorly regulated or intermittent utility
power you should do so, but at least the AC adapter offers a first
line of defense against power spikes reaching the motherboard.
OS battery management active? Older notebooks were equipped
with hardware only battery management schemes that
controlled both charging and battery operation. All new laptops
ship with ACPI (Advanced Configuration Power Interface)
which is a marriage between BIOS routines that monitor board
level charging and device activity, and the operating system. The
operating system power management comes equipped with a
number of default profiles that instruct the laptop if and how to
nurse the battery. There's usually a power user profile that just
runs full out with no consideration of battery life, a number of
special purpose profiles, such as running a DVD movie for a sole
task, and a miserly setting that cuts performance to a minimum
and puts devices like the hard drive to sleep when not in
frequent use.
You can micro-manage these profiles to suit your needs, and you
can always go into the settings and override them or change the
profile at any time. The most useful trick to remember for
running on battery is how to brighten or dim the LCD screen
using the function keys. Screen brightness is a serious power
drain (you're essentially powering a bright fluorescent lamp)
and in most indoor usage, strategic choice of where you sit can
add time to your battery life. If you aren’t working on the
Internet, it also helps to turn off your wireless adapter when
running on battery, and it’s not a bad security practice either.
Many laptops are equipped with an exterior switch to disable
wireless, but you can do it in software as well. When
troubleshooting battery life issues, you may want to run a power
management profile for a few battery cycles that doesn't come
up to your expectations for performance, just to help diagnose
the problem.
If the battery management software reports errors or if the
device driver for the battery is missing or in an error state, it
could be due to an automated software update that went awry,
or an inadvertent change to the CMOS settings. Enter CMOS
OS
battery
management
active?
The Laptop Repair Workbook
99
Setup and make sure that ACPI and PnP OS (Plug-n-Play
operating system) are both enabled. If you can’t find either of
these options in Setup on a newer laptop, it probably means they
are enabled by default. If the device driver for the battery
remains in error state, check for an update on the manufacturer
website, or consider going back to the last operating system
restore point on Windows XP and later systems.
DC voltage good? Check the voltage at the output of your AC
adapter with a DC voltmeter, right on the barrel connector that
gets plugged into the laptop. We give a full explanation of DC
voltage measurement and solutions in the text along with the
power troubleshooting flowchart in the previous section. If
you've purchased a lightweight battery charger for travel, don't
assume that it's putting out the correct voltage just because
there's a connector that fits your notebook. Check your owner’s
manual or the label on the original AC adapter that came with
the notebook.
LED for charging lit steady? While there's no universal
standard, a blinking LED on the battery charge indicator is
probably not good news. It often indicates a battery that has
been over-discharged, the voltage is so low that it's confusing
the charging circuitry into thinking the battery has a dead cell
and would just overheat if a charge is pushed into it. The newer
the laptop, the smarter the charging logic, and it won't want to
try putting a charge into a battery that may damage either the
battery or the notebook itself. In some cases, you'll be able to
recharge an over depleted battery if you wait until the notebook
is shut down, install the battery, and then plug in AC adapter,
and charge overnight without operating the laptop. There are
also circuits built into some newer batteries that simply disable
the battery when it reaches its planned cycle life.
The LED may tell you that it doesn’t recognize that there’s a
battery present, which is a good time to jump ahead to the
“Visual Inspection” steps on the flowchart to see if the problem
is with the latching, mechanical contact or physical battery
condition. Some models may even be able to differentiate
between battery problems and a laptop charging problem,
whether the battery charger regulation is included on the
motherboard or on a daughter power board. But charging can
always fail if the input from the AC adapter isn’t sufficient, so
DC
voltage
good?
LED for
charging lit
steady?
Laptop Battery Failure
100
always check the AC adapter before diagnosing an internal
charging failure.
Charges in CMOS Setup? If the battery never charges when
you’re using your laptop, try entering CMOS Setup after
powering up and letting the laptop sit on the Setup screen and
charge for a few hours. If the battery does take a charge under
these conditions, it means that the problem is likely with the
operating system power management preventing the battery
from charging. It’s also remotely possible that your laptop usage
when running is simply using all of the power provided by the
AC adapter, so there’s no current to spare for charging the
battery.
Charges with laptop off? If your battery only takes a charge
when you leave the AC adapter plugged in overnight and the
laptop turned off, the problem is either with the BIOS level
management of the battery or with the AC adapter. It’s unlikely
a laptop manufacturer would do such a bad job engineering
their charging system, but it is possible if you’ve purchased a
replacement AC adapter that is equipped with a variety of
connectors and is intended to work with a large range of models.
Some desktop replacement laptops have relatively high power
requirements, and some very inexpensive laptops use less
efficient components for cost savings.
Does battery get hot? Recently there have been a spate of high
profile stories in the media about laptop batteries catching fire.
This wasn't caused by normal heating due to charging. The
problem was in the manufacturing process of the individual
cells, where apparently some contamination led to internal short
circuits that could cause the battery to overheat even if it wasn't
in use. Laptop batteries normally heat up a little on charging,
and they heat up even more when discharging under heavy
demand. Battery packs include a temperature cut-off circuit,
that will halt battery charging or discharging if it really
overheats. In some cases, the battery will not be usable
afterwards because the cut-off acts like a circuit breaker that
can't be easily reset.
It certainly doesn't do your laptop battery any good to get very
hot, even if it's within the toleration of the protective circuitry,
so if it's overheating on discharge, consider running on AC
power instead. Just remember you have to shut down before
Charges
in CMOS
Setup?
Charges
with laptop
off?
Does
battery get
hot?
The Laptop Repair Workbook
101
removing the battery unless it's specified as being hot
swappable. You can also try decreasing the performance settings
to lower the power drain. If the battery is overheating on
charging, you can try charging when the laptop is turned off
since the laptop is generating heat as well. Also, pay attention to
the ambient air temperature.
Latch locks tight? It's impossible to see what's going on with the
connector contacts inside the battery compartment once the
battery is installed, so the only indicator you have to proper
installation (aside from normal operation) is the condition of the
latch. If the latching mechanism doesn't show a positive close by
clicking back to the relaxed position, try reinstalling the battery.
Some laptops have a manual battery lock that is operating
separately from the latches, and which will not lock unless the
battery is installed properly. If the latches refuse to click closed
on their own, remove the battery again, check for physical
distortions in the battery package and damage to the connector
both on the battery and in the bay.
Visual inspection pass? Always look before you leap into
purchasing a replacement battery or swapping parts with an
identical laptop. You don’t want to damage a good laptop with
your killer battery or waste your money on a new battery for
your laptop if the connector in the bay is damaged beyond
repair. Look for signs of discoloration on the surface of the
battery, leakage, bulging, or opening seams. Any of these are a
reason to safely dispose of the battery rather than trying it in
another laptop. Likewise, if the battery looks physically perfect,
but doesn’t sit in the bay properly, there’s a mechanical problem
that may have been caused by dropping the laptop or
overheating that will prevent any battery from fitting properly.
Latch
locks
tight?
Visual
inspection
pass?
Laptop Battery Failure
102
103
Laptop Display
Failures
Live
BIOS splash
screen?
Live
on external
display?
Spots (that don’t
clean off), screen
length lines or
swathes always
show, LCD failing
Lines,
swathes or
spots?
Image
upside-down
sideways?
Test
inverter
OK?
Dim
desktop
image?
Check cable
routing and
stress reliefs
Live
desktop in
OS?
No Yes
Yes No
No Yes
Yes
Yes
Yes
No
Yes
Yes No
Inspect
wires in hinge
for physical
failure. LCD, or
board level
connector
failure
CRTL-ALT plus
up-arrow or sidearrow,
or check
video properties
Toggle failure
or video driver,
try safe mode
Yes
Red,
orange tint,
uneven?
No
Display
scrambles
w/ time?
No
No
Redo
connections
fix?
Yes
Fan or
hard drive
sound?
No Yes
Power
failure
chart
Replace inverter
when input live,
output dead
Replace backlight
(delicate job)
Boots
without
display?
No
Hard drive
chart
Yes
Stain
or growing
plume?
LCD rupture,
liquid crystal leak,
replace LCD
Classic video processor
overheating or memory
failure. Check heatsinks,
thermal compound
Yes
Total
blackouts at
random?
For large icons, blurry display,
mouse trails, stuttering movement,
check your video drive settings, try
hardware acceleration, etc.
Usually indicates the
CCFL backlight is failing. A
tough job on some laptops
due to geometry
No
No
No
If entering hibernation,
check lid switch. Going to sleep,
check power saver settings,
screensaver. Try toggling LCD/
external monitor
Yes
No
RAM
swap fix?
Motherboard
CPU, RAM
chart
No
Replace bad
RAM module,
new pair if pair
Yes
Laptop Display Failures
104
The Laptop Repair Workbook
105
Live BIOS splash screen? Most laptops will display a
manufacturer splash screen with their brand name, Dell,
Toshiba, Acer, Sony, etc, before launching into windows. Those
that don't may flash a text screen with the BIOS maker (AMI,
Award, Phoenix) in the corner, and a message telling you what
key combination to use to access the BIOS Setup screens. A
biometric screen prompting you to scan a fingerprint or an
eyeball before the system will boot counts as a BIOS splash
screen here. If the screen lights up with any graphic or text, it
means that the basic display system is functioning. However, a
pure white screen, or a series of color bars, does not count as a
“live” screen here.
Live on external display? All notebooks should support an
external monitor, usually with a high-density D-Shell 15 pin
VGA connector, but some might feature a DVI connector also, or
in place of VGA. It's a vital part of laptop display
troubleshooting to determine if a known good external monitor
can be used. Newer laptops don't keep the external connector
live by default, and some don't allow for simultaneous display
on both the LCD and an external monitor. Make sure you power
down before attaching the external monitor, and on newer
laptops, it may be detected on power up. Otherwise, you can
toggle between the notebook screen (which isn't working) and
the external display with an Fn key combination on most newer
laptops, and a CTRL key combination on some older models.
The Fn key is located at the lower left of the keyboard, normally
between the CTRL and the ALT key. If you can’t figure out the
toggle combination by examining your keyboard symbols, try
the user’s manual or search on the web.
We’ll list some of the more common models with recent toggles
are here: Toshiba often uses Fn-F5 to toggle between the laptop
LCD and an external display. IBM or Lenovo uses FN-F7, Acer
varies with the model, using Fn-F5, Fn-F3, Fn-F8, Sony Fn-F7,
Dell Fn-F8, HP or Compaq, Fn-F4. Apple PowerBooks and
iBooks generally autosense external monitor connections,
though you may choose the monitor icon on the Control Strip, or
try a Command – F2 combination. Also, some Mac models have
no external video port. There are variations with the age of the
laptop and not all manufacturers have standardized on a key
combo across the whole range, but you can usually figure it out
from the little pictures on the function keys that line the top of
the keyboard. If you read on the web that you need to enter
Live
BIOS splash
screen?
Live
on external
display?
Laptop Display Failures
106
CMOS Setup to toggle to an external monitor, it isn’t any help
since you need to be able to read the screen to do it.
Fan or hard drive sound? If you can't get any life at all on the
laptop LCD or the external display, it's entirely possible that the
problem goes deeper than a video issue. Signs of life include the
cooling fan blowing, the hard drive spinning up, any LED
activity beyond the LED indicating AC power is attached or
battery charging. If you don’t see or hear any signs of life,
proceed to power failure troubleshooting. If the system is
powering up, even going through boot, you can often tell by the
level of hard drive activity demonstrated by the sound or the
hard drive LED flashing.
When the system does boot blind, with no signs of life on the
LCD or external monitor, there aren’t too many options. It could
either be that you didn’t successfully switch to the external
monitor, that the output for the external monitor has failed or
never worked and was simply never tried before, or that the
video processor has failed in a manner undetectable by the
BIOS. If the video failed while you were operating, or if it works
briefly at boot time, it could be the video processor is
overheating or has partially lost contact with the motherboard.
It’s worth searching the web to see if this is a problem endemic
to your model. If the video processor is in a BGA (Ball Grid
Array) package and is noted for a high failure rate of the solder
connections in your model, you may be able to reflow the solder
using a heat gun or other hack. If you are sure the system is truly
booting blindly (you might put in a music CD and see if it autoplays),
you have a nearly working system.
RAM swap fix? Laptop video RAM is almost always shared with
the system, so if the RAM has failed, the system won’t boot and
the video won’t work. Not only is RAM failure one of the most
common reasons for the laptop to fail to light up the screen or
boot, it’s also the easiest part in the laptop to replace, so it’s
always worth checking before digging further into the laptop
guts and possibly creating new problems. If your laptop contains
two RAM modules, or if you can borrow a compatible module
from another laptop, you can check for failure without
purchasing a new module. The RAM is accessed on most models
by removing one or two screws from a panel on the bottom of
the laptop. Unplug the AC adapter and remove the battery
before proceeding. If you have two modules installed, remove
Fan or
hard drive
sound?
RAM
swap fix?
The Laptop Repair Workbook
107
the outer one, then try booting. If that doesn’t work, swap the
removed piece for the piece that’s still installed and try again. If
you have a compatible substitute module from another laptop or
one that you purchased new, remove all of your installed RAM
before trying it. Note that some old laptops had the base RAM
soldered to the motherboard, and if it fails, it requires a board
level repair you can’t do at home.
Dim desktop image? Can you see a ghost-like image of your
desktop that is functional, ie, one that changes if you drag an
icon, launch a program or disappears if you shut down?
Standard LCDs produce very little visible light on their own,
they require the Cold Cathode Fluorescent Light (CCFL) to light
the screen from behind. The fluorescent tube is normally located
at the top of the screen, and a bright reflective surface
distributes the light across the back of the LCD, so it can shine
through the liquid crystals of the liquid crystal display, which
only transmit red, green or blue (RGB). If you don’t see a dim
image, try holding a bright flashlight close to the screen at an
angle, and see if you can make out the desktop.
Test inverter OK? Inverters put out high voltage, high frequency
(something below the broadcast AM band) electrical signal, so
you can't test them with the average handheld meter. If you have
access to a higher quality RMS multi-meter, one that reads
frequency into the KHz range, you may be able to test for
inverter function without even taking the screen apart. The
normal range for laptop inverters is between 30 KHz and 70
KHz, and meters will usually read signals well outside their
specified range. A $20 meter rated for 20 KHz can probably pick
up inverters operating up to 40 KHz, though it will just show a
“1” for over-range if the inverter is active. A meter rated for 50
KHz should work for all inverters. If you can’t pick up the field
holding the probes against the plastic bezel, you can take the
screen apart and try the probes on the insulated wires carrying
the inverter output to the backlight. The test is to pick up the
radiated electromagnetic field, so you never need to contact a
bare conductor.
If you’ve already taken apart the screen, you can check the low
voltage DC power into the inverter, which comes through a
hinge from the motherboard. If the power to the inverter is good
but there's no output, the inverter is bad, and can be usually be
replaced for well under $100. If the output of the inverter is
Dim
desktop
image?
Test
inverter
OK?
Laptop Display Failures
108
good and the backlight isn’t lit, either the solder connections on
the backlight have failed or the CCFL tube has failed. If you’re
the adventurous type and don’t have access to a meter or a spare
CCFL tube from another laptop, you can try a cheap CCFL tube
from a PC modding kit, the $5 kind that are used to turn PCs
into light shows. The tube won’t be matched to the inverter, but
if it lights up, the inverter is working. If the inverter starts
smoking, it wasn’t a good idea.
Redo connections fix? If taking the laptop apart and redoing all
of the plug-together connections in the lid and the back of the
LCD fixes the problem, you're golden. If not, inspect the wire
harness running through the hinge to the lid for any signs of
damage. It is still possible that you have a dead backlight or
inverter and you can't see a dim image on the screen due to the
type of LCD used, a darker than normal plastic film or less than
perfect vision. Otherwise, you're faced with total LCD failure or
a board level problem in the video subsystem output to the LCD,
which is possibly a connector failure or a short in the cabling.
Live desktop in OS? After the operating system splash screen
tells you what version of Windows or other OS you are using,
does your usual desktop appear? If your sound is enabled and
you usually get a "Windows rush" when you start the computer,
you should hear it now. If the desktop does appear, the
troubleshooting process shifts at this point to image quality and
abnormalities.
Boots without display? If the desktop never appears and you're
left looking at a blank screen, but you can hear the hard drive is
working away and other usual start-up sounds, or see the
activity on the hard drive or wireless LEDs, the system is
booting but the display isn't functioning. Another test is to put
in an audio CD, and see if the drive spins up and the music
starts playing, or checking if the keyboard is live by putting on
Caps Lock and seeing if the LED lights. Try booting in Safe
Mode, though if you shut down blind using the power switch,
there's a good chance the laptop will start in Safe Mode by itself
the next power-up. If you still can't get a live desktop, try
attaching an external monitor, and if comes up fine, the problem
is either an incompatible display resolution set in the operating
system or a software setting forcing the OS to display on the
external screen only after boot. See the notes about swapping
under the troubleshooting symbol “Live on external display?”
Redo
connections
fix?
Live
desktop in
OS?
Boots
without
display?
The Laptop Repair Workbook
109
If nothing you do gets a live desktop for even a moment, or if
you don't hear any of the normal startup activity despite the live
BIOS screen on power-up, the video subsystem is fine but the
OS is failing to boot. The most likely reason for this is software
corruption, including virus damage, or a physical problem with
the hard drive. Proceed to hard drive troubleshooting.
Lines, swathes or spots? Assuming somebody didn't draw
perfectly straight lines on your screen with a very thin magic
marker or apply dots with the same, these are symptoms of
physical LCD failure. It's not usually the liquid crystals that fail
through rupturing, but the transistors that control their twist for
individual pixels or address whole lines. The individual point
failures may be tolerated if they aren't rapidly multiplying, They
don't affect anything but your temper in terms of usability.
Laptop manufacturers normally specify some smallish number
of dead pixels after which they will change the LCD under
warranty. A pixel consists of three individual sub pixels of red,
green and blue. When all are on together, the light mixes to
produce white, when all are out, the result is black. The pixel
failures don't have to be dead black spots, they can fail "on" as
well, producing a white spot, or sub pixels can fail “on”, meaning
you'll always have a red, green or blue spot, which can be more
annoying than black on a white desktop.
A whole swath of a solid color, black or white, usually indicates
the failure of a chip (integrated circuit component) on the LCD
that controls that range of horizontal or vertical lines on the
screen. A large black (dead) bar all the way across or up and
down the screen can also indicates that the ribbon connector is
partially worked off the LCD panel or the motherboard. Cable
connection failures are more common on certain laptop lemons
where the connector was poorly designed and the cable is too
short, so vibrations or flexing of the case tend to work it loose. If
it's not a loose connection, and the display is affected by
squeezing the edge of the lid, it's likely a contact on the edge of
the LCD, which won’t be repairable without replacing the whole
LCD.
Lines,
swathes or
spots?
Laptop Display Failures
110
Image upside-down or backwards? Don't laugh if you already
know the answer to this one, it's brought about more than one
embarrassing service call for some hapless notebook owners.
Many laptops have the ability to flip the display horizontally or
vertically. You can do this from the keyboard, on purpose or
accidentally, by hitting CTRL-ALT and the appropriate arrow
from the direction arrows on the right-hand side of the
keyboard. If the key combination doesn't do it, the problem is in
software, either in the video driver properties or a malicious
mirror program installed to make you wonky.
Red, orange tint, uneven? Is the entire screen tinted pink or
orange (probably growing worse over time) or is the background
brightness of the screen uneven, particularly near the edges?
The tint is often caused by a failing backlight not putting out the
full spectrum of white light, so the CCFL tube needs to be
replaced. This can be a delicate job due to the latter problem,
uneven lighting. The tube is very thin, flexible, and often
installed underneath a reflective foil that wraps the whole back
of the LCD panel. If the backlight tube is jolted or warped out of
position, or if you install it poorly, you can end up with uneven
lighting of the screen. You can live with it if you normally use an
external monitor and only use the LCD on short jaunts out of the
office, but otherwise, you'll need to try to correct the placement,
which can be very difficult once the foil tabs are bent on some
models. Some LCD panels are sold with integrated backlights
that are nearly impossible to replace in the home setting.
Display scrambles with time? This is the classic symptom of an
overheating video processor or memory problems, assuming you
aren’t running a “dissolve” screensaver. Most laptops share
main memory with the CPU, but memory modules don't have to
fail all at once. See the text with the troubleshooting symbol in
this section for “RAM swap fix.” If you confirm that the RAM
isn’t the problem, you should check if the same thing happens
with an external monitor before proceeding. If an external
monitor works fine for hours without getting scrambled, the
problem is likely with the electronics on the LCD panel.
But if the problem appears on both the laptop LCD and an
external monitor and it’s not the RAM, the prime suspect
remaining is the video processor. A video processor may also
display these symptoms if the entire laptop is running too hot,
due to failure of the main cooling fan, clogging or obstruction of
Image
upside-down
sideways?
Display
scrambles
w/ time?
Red,
orange tint,
uneven?
The Laptop Repair Workbook
111
the intake or exhaust vents. Make sure you are running the
laptop on a flat surface, with some open space to all sides, and if
overheating is suspected, proceed to the section on
troubleshooting overheating. The problem may clear up when
you run in a power saver mode on battery with the processing
speed turned down. You can also try turning off hardware
acceleration in the advanced properties of the video adapter in
the operating system.
If all else fails and the problem is specific to the video processor,
your best bet is opening up the body of the notebook and
reinstalling the heatsink on the video processor. Search the
Internet first to find illustrated instructions for your exact
model. Make sure there is enough thermal compound (or not
too much!) and if equipped with a fan, that the fan is still
turning. While you’re on the Internet, research video problems
with your model and if the video processor is a soldered BGA
(Ball Grid Array) chip, see if it’s a common failure for your
system. There are several solder reflow hacks that may cure your
system, at least temporarily, but they are really intended for
users with advanced technical skills. Reflowing solder with a
heat gun requires removing the motherboard, stripping it down
to nothing and covering vulnerable areas with tin foil. You can
find some video presentations of the technique on YouTube.
Stain or growing plume? If a blotch appears on the LCD that
isn't due to food on the screen or dirty fingerprints, and it grows
over time, it's the physical failure of the glass sandwich and can't
be repaired. This might also appear like octopus ink being slowly
injected into the screen, a sort of growing plume. The only cure
is replacing the LCD.
Total blackouts at random? One possible cause of seemingly
random, total blackouts, is a loose connection. However, before
you take the body and the lid of the laptop apart and remake all
of the connectors in the video subsystem, it's worth checking the
more obvious culprits, like a screen saver set to "blank" and poor
wake-up behavior, or the video getting toggled to a non-existent
external monitor by a keyboard failure (or operator failure).
Check the power saver settings as well, and try running on a
different power profile for a while in case the one you have been
using is corrupt. Likewise, try running on battery in a low power
mode to see if the blackouts are an overheating issue, but that's
Stain
or growing
plume?
Total
blackouts at
random?
Laptop Display Failures
112
unlikely if the screen returns to the point you left off with some
judicious tapping or moving of the lid.
If the problem is unfamiliar distortions to the display, such as
multiple screens displayed, only part of the desktop visible or a
very blurry image, these are all signs of the video resolution
having been changed to a bad choice, one which doesn't match
the native resolution of the LCD. Change the video properties in
the operating system back to native resolution of the LCD,
usually the highest resolution and number of colors offered. If
the problem is large icons or a change in font size, this is due to
display property choices in the operating system or in the
particular application showing the symptoms.
113
Laptop
Overheating
Puff of
smoke or
odor
High
air temp or
sun?
Is
battery too
hot?
Autohibernate,
can simulate
overheating
shutdown
Recent
upgrade of
BIOS?
Fan
never
runs?
Laptop
on hard, flat
surface?
No Yes
Yes
No
Yes
Yes No
If problem
appeared after,
flashing BIOS
upgrade restore
old BIOS if
possible
No
Laptop
shuts
down?
Yes
Hot spot,
fan always
runs?
No
No
No
No
Remove battery
if it can be done
safely. If smoke
increases or flames
appear, call fire
department. Inspect
when cool
Yes
Never run in shoulder
bag, on bed. Sides, back,
bottom must be clear
Yes
No
Make sure any
BIOS and OS power
management settings are
set for cool operation not
high performance. Select
lower temperature for fan
activation if possible. Try
3rd party fan control and
temperature monitoring
software
AC
adapter in
use?
Unplug AC
adapter, shut
down, remove
battery if not too
hot. Don’t leave
unattended until
cool and inspect
battery and
interior
Yes
Battery
chart
No
Yes
Don’t use in direct
sunlight, leave in car in
hot weather. Try extra
cooling system
Hardware failure,
fan or temperature
sensor
Cool
settings
BIOS and
OS?
Low
battery, boot
order?
Yes
Data loss,
lockups?
No
Read reviews and
support forums for
“normal” behavior
Same
problem low
temp?
Motherboard,
CPU, RAM
chart
Yes
No
Restore BIOS
defaults. Clean
vents with
canned air. If
still overheats,
clean interior,
redo heatsinks,
check
secondary
fans, air paths
component
overheating
Check web for model
characteristics before
proceeding to cleaning
Yes
Yes
No
Laptop Overheating
114
The Laptop Repair Workbook
115
Puff of smoke or odor? Never play with fire. If you see smoke or
smell a burning odor, it's not something you can afford to
ignore. In some instances, brand new laptops will give off a bit
of odor when they are first powered on that smells a little like
hot plastic and a little like the ocean. In any other situation,
smoke or smells coming from your laptop are not normal. If you
recently spilled something on the laptop and have already dried
it out and cleaned it to the best of your ability (or your repair
person's ability), there may be a little residual burning off the
first time you run the laptop and get it up to operating
temperature.
Burnt odors are usually from overheated plastic component
packages out-gassing, and where there’s smoke there may be
fire. If the problem is in any way associated with a hot Li-ion
battery, put the thing outdoors if you can safely do so. Whether
or not a particular manufacturer issued a recall for the battery in
your laptop, a manufacturing flaw in a Li-ion cell can lead to
fire. Even if the puff of smoke isn’t repeated or the odor goes
away as soon as the laptop cools down, you should make a
serious effort to locate the component at fault rather than just
powering up again and hoping for the best.
High air temp or sun? All laptops will overheat if you use them
in a cruel enough environment. Obvious examples are stifling
hot attics, vehicles without air conditioning in the summer or on
hot surfaces. Hot surfaces aren't limited to radiators or metal
desks touching steam pipes, they also include dark surfaces that
get a lot of direct sunlight, even if they are located indoors.
Using a laptop outside in direct sunlight in the summer is more
than a problem for your eyes, especially if the laptop case is dark
rather than reflective. Always remember that laptop computers
are entirely reliant on air flow for cooling, and the higher the
ambient air temperature, the less the laptop will be able to cool
itself.
Is battery too hot? Some people are more sensitive to
temperature than others, so using "too hot to touch" isn't a great
troubleshooting technique. Unfortunately, very few people have
a thermometer around capable of measuring temperatures
through the normal operation range of a battery, including most
computer technicians, so touch is all most people will have to go
on. If the battery seems excessively hot, check the web to see if
it's been included in a recall or if a hot battery is typical of the
Puff of
smoke or
odor
High
air temp or
sun?
Is
battery too
hot?
Laptop Overheating
116
particular laptop model. Then proceed to the battery
troubleshooting flowchart.
Fan never runs? Most laptop users are accustomed to hearing
the cooling fan(s) straining away during certain intensive
computing operations, and even the quietest, best behaved
notebooks normally cycle the fan on and off at low RPMs during
normal operation. If the fan never runs, it doesn't mean your
laptop is overheating, but it could mean that something may be
wrong with the fan or the settings. If something is wrong with
the fan or the temperature controller, eventually the laptop will
overheat, unless you do all of your work in a walk in freezer.
Recent upgrade of BIOS? Anecdotally speaking, it seems that
"my fan never comes on anymore" problems often occur after a
BIOS upgrade. Manufacturers generally encourage users to
install the latest BIOS version available for the model on the
manufacturer's website, and if you call tech support with an inwarranty
overheating problem, the first thing they are likely to
do is tell you to upgrade to the latest BIOS. The problem is, the
notebook really should operate normally with the BIOS version
you purchased it with, or they shouldn't have sold it to you. If
you want to add new peripherals or upgrade an internal
component and it's not supported unless you upgrade the BIOS,
you don't have much choice. Outside of that, avoid BIOS
upgrades like the plague, keeping in mind that a failed upgrade
can leave you with a paperweight that can only be repaired by
sending it out. If the fan problem appeared after you upgraded
the BIOS and the laptop which was operating fine originally is
now overheating, try reinstalling the original BIOS if it’s
available.
Cool settings BIOS and OS? There's no universal standard for
what BIOS settings are user adjustable for a given brand or
model of laptop. If you're having overheating problems and you
can lower the temperature at which the fan automatically
powers up, it can't hurt to do so. There are a large number of
operating system settings that affect the amount of heat the
laptop will generate, from the speed of the processor and the
brightness of the screen to the settings for cooling efficiency.
The manufacturers try to give the user as much control as
possible, so if you or another user ran the cooling control down
to the minimum to reduce fan noise while listening to Internet
radio, it may be time to compromise.
Fan
never
runs?
Recent
upgrade of
BIOS?
Cool
settings
BIOS and
OS?
The Laptop Repair Workbook
117
If the settings are all on the defaults, the fan never comes on,
and the system is overheating, it's either a fan failure or a
problem with the control circuit. The fan itself is a replaceable
DC fan that can often be replaced without removing the heatsink
(if it's mounted directly on the CPU or graphics processor). One
simple test for notebook fans is to gently blow on them. If the
fan doesn't spin, either the bearing has failed or something is
melted or jammed, because the motors are tiny. Testing the
control circuit is an open-unit bench job for experienced
technicians. It's easier and less time consuming to just replace
the fan with a known good unit, and if it still doesn't work the
problem is in the controller or the power supply to the fan.
Replacement fans are sold by size, measured in millimeters,
giving the length, width (normally the same since they’re
square) and height. Don’t buy a fan online without seeing a
picture of it so you can determine if it matches your mounting
hardware. Fans are sold with a two pin connector or with bare
leads for soldering.
Laptop on hard, flat surface? The leading cause of laptop
overheating is what engineers call "poor siting." Notebook
computers are designed to run on flat level surfaces, with at
least a couple inches of unobstructed space all around. Running
a laptop computer sitting in the opened shoulder bag on your
lap is a great way to block intake and exhaust vents and overheat
the poor computer. Running on a bed is equally bad for laptops
that have vents on the bottom, and if it's a soft bed or there are
loose sheets and blankets, the side vents can get blocked as well.
Running on your lap is generally discouraged by manufacturers,
but most laptops do get run on a lap from time to time. Be sure
to locate and avoid blocking any air vents on the bottom. If
you're troubleshooting an intermittent laptop overheating
problem, the first check is to pick a nice cool place with a large
flat surface to run the notebook and see if the problem clears up.
Laptop shuts down? Computers may not be smarter than
people, but if they're designed properly, they will shut
themselves down before overheating to the extent that they do
themselves damage. If the smart person keeps turning the
notebook back on and figures out a way to foil the protection,
the laptop is probably doomed. Once a laptop shuts down for
thermal event protection, it may refuse to power back up for a
few minutes, or it may begin to boot and shut down as soon as it
gets to the point that it can figure out that it’s too hot.
Laptop
on hard, flat
surface?
Laptop
shuts
down?
Laptop Overheating
118
The over-temperature protection is generally a BIOS rather than
an operating system function. One sure sign of an overheated
laptop is one that shuts itself down while you're using it and
then refuses to boot as far as the operating system unless you
leave it alone for an hour or so to cool down. Unless you've been
working temporarily in a very unfriendly environment, with
high temperatures, direct sunlight, etc, you should take even a
single overheating shutdown as a warning to back up your data
at the first opportunity. If you can’t keep your laptop from
shutting down long enough to do a back-up, some people have
reported success starting the process and putting the whole
laptop in the fridge until it’s complete.
Hot spot, fan always runs? Many laptop brands and models have
characteristic hot spots, like a particular corner of the keyboard
or above the battery compartment. Before proceeding with the
more invasive cleaning techniques that involve opening up the
laptop (and potentially breaking something), spend some time
searching the web for user feedback on your make and model.
The bothersome hot spot on your laptop that none of your
friends or colleagues have ever heard of may be a characteristic
issue with your particular model and not worth a major panic.
Similarly, if the fan always runs, or almost always runs, it may
be a characteristic of the particular model that it simply gets hot
in normal operation, or the fan control software might be poorly
conceived. As long as the laptop isn't overheating and the fan
behavior is typical for the model, you should learn to live with it
and only get worried when you don't hear it anymore.
Data loss, lockups? Troubleshooting all of the software problems
that can cause data loss is beyond the scope of page sized
flowcharts. Overheating of the CPU, the RAM or the hard drive
can cause data corruption and lead to the laptop locking up, but
overheating is only one of many potential culprits. If you haven’t
noticed any change in fan noise or any increase in the heat you
sense from the laptop, it’s possible that the problems are due to
another cause. See the hard drive and motherboard, CPU and
RAM troubleshooting flowcharts.
Hot spot,
fan always
runs?
Data loss,
lockups?
The Laptop Repair Workbook
119
Same problem low temperature? Wait until the laptop is
completely cooled down (overnight), use it in a cool or air
conditioned environment and find out if the errors you were
encountering repeat soon after you boot. If the errors do repeat
and the problem was related to overheating, the damage is
already done and you now have a hardware failure problem.
Checking the other flowchart for motherboard, CPU and RAM
troubleshooting may narrow down the problem. If the problems
don't immediately come back when the laptop is first booted
cold, but only appear once it heats up, it's possible that a
thorough cleaning and inspection will help clear up the problem
that’s causing the overheating, and no hardware replacement
will be necessary.
Low battery, boot order? The default setting for most laptops
when they reach a critically low battery state is to go into
hibernation, the quickest way they can save any data in open
applications and drop into a lower power state until the AC
adapter is connected. If the battery has failed and won't accept a
charge, if there's a problem with the AC adapter, or if the
operating system software isn't as clever as it should be, the
system may get locked into a loop. As soon as the operating
system boots to the point where it can identify a battery
problem, it goes back into hibernation waiting for salvation. In
some rare instances the laptop may continue this looping
behavior with the battery removed. If the battery and AC
adapter are good, the slow fix is to let it charge overnight before
trying to boot. If that doesn't work, try changing the boot order
in the CMOS Setup to the CD/DVD, just to break the loop.
Cleaning process. Do the simple things first. Close the laptop lid,
unplug all cords, inspect all four edges and the bottom of the
laptop for air vents to familiarize yourself with where they are. If
you spot air vents on the bottom about where you are
accustomed to holding it on your thighs, that's probably the
whole problem right there. Likewise, some people
misunderstand the concept of creating more air clearance under
the laptop and try jacking it in the air an inch with a book. If the
book is smaller than the laptop, it will likely fit between the little
legs or pads on the bottom of the laptop that are there to raise it
off the table for air circulation, and it will overheat even faster
than before.
Same
problem low
temp?
Low
battery, boot
order?
Restore BIOS
defaults. Clean
vents with
canned air. If
still overheats,
clean interior,
redo heatsinks,
check
secondary
fans, air paths
component
overheating
Laptop Overheating
120
As you look into the vents, you may see dust build-up on foil
radiators or heatsinks, not to mention on the fan assembly if it is
visible. Depending on the size of the vents, you may be able to
loosen up and capture some of the dust with Q-tips (cotton
swabs). The problem with using compressed air to clean a laptop
without taking it apart is that while you'll definitely blow the
dust off wherever you aim the air stream, you'll often be blowing
it somewhere else in the notebook. The immediate result will be
a cooler running notebook because you’ve removed the dust and
lint build-up on heatsinks which can act as a blanket and keep
the heat from being radiated and conducted away. But if all
you've accomplished if throwing that blanket over some other
hot components that aren't visible through the vents, you may
have greater problems in the future. Make sure you use a can of
compressed air sold for cleaning electronics, otherwise there
may be harmful propellants or liquids mixed in. Read the
instructions, and if they tell you to always hold the can upside
up, be careful to obey. Holding it upside down may result in
squirting propellant rather than compressed air.
Before opening up the laptop, find the owner’s manual or search
the web for exact instructions. Once you gain access to the active
cooling components, fans and heatsinks, you can blow off all the
dust with compressed air and get most of it out of the case.
Some fans may be damaged if you spin them up beyond their
operating RPMs with the compressed air, so you should prevent
the fan from spinning if blasting it up close. Pay careful
attention to the air paths in the laptop and look for any
blockages, both when you open it up and when you go to put it
back together. Notebooks are generally engineered with very
little slack in the cables to keep them from flopping around and
potentially breaking up the airflow, but something as innocuous
as a loose paper label flipping up and blocking an air path can
cause a world of trouble.
In severe cases of laptop overheating, especially those where
data corruption or automatic shutdowns are occurring, you
should check that any heatsinks are properly installed. The only
way to do this is to remove them. Depending on the design of
the laptop, you may have active heatsinks on both the CPU and
the video processor, and there may be some passive heatsinks
with fans strategically located to circulate air over them. Some
passive heatsinks are basically glued to the package and can’t be
removed. If you try pulling on them, you could damage the
The Laptop Repair Workbook
121
component or the motherboard. The active heatsinks are
normally mounted with a latching mechanism or screws and can
be removed, though they might stick pretty fiercely to the
processor depending on the condition of the existing thermal
paste.
When you purchase the new thermal paste, it may be sold in a
kit with a thermal paste cleaner. Cleaning up the old goo is just
as important as applying the new goo properly. Don't use
household cleaners to clean up thermal paste, they can leave an
oily residue that actually prevents heat from conducting to the
active heatsink, worse than nothing. If you don't purchase a
cleaning kit, the fallback is scraping with a credit card and
cleaning with isopropyl (rubbing) alcohol on a clean cloth or
paper towel. Once the new paste is applied and you've
reinstalled the active heatsink and closed up the case, there's no
guarantee that your overheating problem will be solved.
Overheating may be a symptom of chip level degradation and
imminent failure. While poor cooling was likely a contributing
factor, closing the barn door after the cow is gone isn't going to
undo the damage.
AC adapter in use? If you see a puff of smoke or smell a burning
odor and the AC adapter is in use, you should unplug it
immediately if you can. You can burn your fingers or even
electrocute yourself on the AC side of the cord, so exercise
extreme caution. When there's a risk of fire, as documented in
laptops with defective batteries, your first priority should be
guarding against an outbreak of fire, not worrying about the
laptop condition or studying this flowchart. Some people will
immediately call the fire department or grab the fire
extinguisher at the first sign of smoke in electronics. If there are
flames coming out of the laptop, it's history, so the fire
extinguisher or fire department is the way to go. If it's just a puff
of smoke, the action may all be over and unplugging the AC may
preserve a laptop that can be reasonably repaired.
Troubleshooting the cause of the smoke, unless you just poured
your coffee on the keyboard, requires taking the laptop apart
and visually inspecting the components down to the board level.
If the laptop is at all hot, wait for it to cool before attempting
disassembly. Always remove the battery pack before opening up
a laptop. Since component spacing in laptops is so tight, you'll
rarely get lucky enough to zero in on the problem with your
AC
adapter in
use?
Laptop Overheating
122
sense of smell, which is sometimes effective with larger desktop
computer components.
Inspect the circuit boards, connectors, remove and inspect the
drives. Pay special attention to electrolytic capacitors and
discrete power semiconductors, usually located very near the
power input. If you find a burnt spot or signs of melting on a
discrete component, such as a hard drive, DVD drive, capacitor
or power semiconductor, there's a reasonable chance that the
failure was internal to that component and that replacing it will
fix the problem. If there's a large burnt or melted spot on the
motherboard, it's rarely cost effective to even attempt a
replacement.
If the problem was a hot plastic odor and you can't find any
signs of damage during your visual inspection, it's possible that
the laptop was overheating and you caught it in time. Some
people are more sensitive than others to plastic odors, and there
is always the possibility that a little foreign matter, food or
insect, found its way into the laptop and got incinerated. Read
over the procedures for troubleshooting laptop overheating, as if
you never encountered the burnt odor, and make sure the
notebook wasn't operated in such a way that it was being
encouraged to overheat.
123
Laptop Drive
Problems
LCD or
monitor
live?
Laptop
boots?
Reset CMOS
defaults. Try OS
repair. Check
boot order make
C: first
Missing
OS?
OK
if reseat in
bay?
Drive
register in
CMOS?
Any fan
or drive
sound?
Yes No
Yes
No
Yes
Yes
Yes
No
Yes
Yes
OS splash
screen?
No
No
Tin can
or clunking
noise?
Yes
No
Check hold-down
screw not missing
No
Display
failure
chart
Your data
may still be
recoverable
No Boots w/ Yes
AC power?
Power
failure
chart
Battery
Chart
Boots
no external
connex?
Determine
spoiler by process
of elimination
Hardware failure,
drive, connector or
board level
Boot
Safe
Mode?
Yes
Virus
rescue
work?
Classic driver conflict
or problem with recently
installed software
Yes
Reseat drive, try
drive in USB kit.
A rescue formatter
from manufacturer
may fix drive but will
erase ALL data
No
Make sure
that your virus and
malware software are
loading at boot time
and updating
automatically
Yes
No
Partition
manger see
drive?
No
No
Boots OS
CD or DVD?
Try option to repair
existing installation. If repair
works, problem was file
corruption, otherwise, if data is
backed up, try nuke and pave.
On errors, replace drive
No Yes
Replace drive
if critical
Yes
No
Change boot order to D:
first. Try known good OS CD
or DVD as test. If nothing will
boot, either CD/DVD is also
bad (see flowchart) or board
level controller failure
USB, PC
Card,
docking
station, etc..
Likely a
performance
issue, try
OS tools,
antivirus
DEFRAG
etc...
Data
loss, drive
error?
No
Connection,
overheating,
drive failure
Yes
Laptop Drive Problems
124
The Laptop Repair Workbook
125
LCD or monitor live? The first step in troubleshooting hard
drive problems is determining whether or not you are dealing
with a hard drive failure or something else entirely. If neither
your LCD screen nor an external monitor show any signs of
intelligent life from the laptop when it’s powered on, the
problem will rarely be related to the hard drive.
Laptop boots? Does the laptop start up normally, get you all the
way to the desktop? If the laptop boots, unless you are dealing
with a noise issue, the problem you're having is either software
related or an accumulation of errors on the drive. If the laptop
doesn’t boot, we’ll move on to troubleshooting why it doesn’t
boot before blaming the hard drive.
Data loss, drive errors? If the operating system disk
maintenance software, such as ScanDisk, is reporting errors
every time you run it, if you see text messages about "write
failures" or if successive surface scans report a large number of
errors, your hard drive is actually failing. Before you conclude
that the hard drive needs replacing, make sure that you aren’t
operating the laptop in an environment it wasn’t designed for.
Overheating can lead to hard drive recording errors, as can
taking it up to 20,000 feet in an observation balloon, or
excessive vibrations from operating on public transportation
systems. It’s also possible that the hard drive data connector is
barely making contact with a couple of pins, so reseat the drive
and make sure it’s secured properly in the bay before giving up
on it.
Tin can or clunking noises? If your laptop hard drive develops
new noises over time, if it sounds like a motor in a tin can or
starts making frequent clunking noises, it may be a sign of
impending failure. If you have important data, you should start
backing up more frequently, and if you use the laptop for critical
work and want to minimize the chances of it failing when you
most need it, you can replace the hard drive at this point.
However, hard drive noise can go on for years and years, and no
doubt more people throw away working laptops with noisy hard
drives than throw away laptops due to hard drive failure.
If you're getting very flaky errors, having difficulty when
connected to the Internet, are seeing large scale file corruption
or data loss, the problem is more likely due to malware (bad
software such as a computer virus, spyware, trojans) than
LCD or
monitor
live?
Laptop
boots?
Data
loss, drive
error?
Tin can
or clunking
noise?
Laptop Drive Problems
126
electronic or mechanical failure. Another cause for data
corruption is letting the amount of free space on the drive fall so
low that the operating system has trouble managing virtual
memory. The old rule of thumb was to keep about 10% of the
drive free, and even though drives are much bigger these days,
the amounts of data held in RAM have grown as well. It’s also
critical to have free space available when you run system tools to
optimize hard drive performance, like a defragmentation
program.
Boots with AC power? If the laptop boots up with the AC power
adapter plugged in, the problem is with the battery, not the hard
drive. Proceed to the battery troubleshooting flowchart. If you
notice the hard drive performance seems to degrade badly when
you are running on battery power, it means the power
management is turning off the hard drive after too short of a
delay on no activity, probably just a minute or two. You can
change the power management setting to increase the shutdown
delay for the hard drive or to ensure the hard drive
remains spun up as long as the laptop is turned on.
Boots no external connex? If you have any external devices
plugged into your notebook, such as printers, cameras, PC Cards
(the replacement for PCMCIA cards), external keyboards or
mice, network cables, monitors, unplug them all. If the laptop is
sitting in a docking station, remove it. If the laptop boots when
all of the external connections are removed, the problem isn't
the hard drive, it's a faulty external device or signal. You can
determine which device is preventing the OS from booting by
process of elimination. The problem isn't necessarily a hardware
failure, it could be the driver for that device is so unfriendly or
corrupted that it's stalling the boot process when called to
manage its client.
Drive register in CMOS? Does the laptop BIOS see that a hard
drive is installed and correctly identify it in CMOS Setup? If not,
try restoring the BIOS defaults or “Safe Settings” in case the
CMOS settings have been corrupted. If the BIOS still doesn't
register the hard drive, either the hard drive has failed, the
connector has failed or come undone, or you have a board level
problem. Don’t jump to flashing the BIOS because the hard
drive doesn't show up, unless it's a replacement drive and the
previous hard drive still registers if you reinstall it. The original
hard drive should always be recognized by the existing BIOS if
Boots w/
AC power?
Boots
no external
connex?
Drive
register in
CMOS?
The Laptop Repair Workbook
127
the hardware is in operating condition and the connector hasn't
come undone. If reseating the hard drive fixes the problem,
make sure that it isn't missing a hold down screw.
Missing OS? If the BIOS reports “Missing OS” or "OS not found"
during the boot process and you just installed a brand new hard
drive, it just means you still have to install the operating system.
Next check the boot order in the BIOS, make sure the C: is the
first boot device and restore the BIOS defaults. Otherwise, you
could have a hardware failure, but it's far more likely that the
operating system has been corrupted. While file corruption can
occur for non-fatal reasons, such as glitches during overheating
or vibration and shock, the leading cause is probably computer
viruses or operator error, writing over or deleting required
system files. If you have a rescue disk generated by your virus
protection software, try running it, after which you can boot the
OS CD/DVD (if you have one) and try a repair installation, if
necessary. But keep a close eye on the prompts, and if you’re
told that proceeding will wipe out all the data and programs on
your hard drive, stop if you aren’t willing to lose them.
OS splash screen? Does the operating system load get as far as
the splash screen, which will be the Windows flag on most
laptops? If it does, odds are that your drive is largely intact and
the data should be recoverable even if you can't get back to your
previous operating state with the tools you have available. If the
splash screen doesn't show and hard drive contains essential
information that hasn't been backed up, it's a good time to
consider calling in a professional for data recovery. While the
problem may not prove to be serious, your attempts to get the
laptop back to a bootable state may end up making the data
recovery job harder, more expensive, or even impossible.
Boot Safe Mode? If the laptop will boot up in Safe Mode, it's
usually in pretty good shape but is having a problem with a
recently installed (or recently corrupted) piece of software or
device driver. If the boot failure has occurred immediately after
installing a new program or peripheral and restarting, the first
step is to uninstall the software that was just installed, or
disconnect the new peripheral and remove the driver before
attempting to reboot. In some instances, simply starting in Safe
Mode will allow Windows to recover it's equilibrium and the
system will boot normally as soon as you shut down properly
and restart.
Missing
OS?
OS splash
screen?
Boot
Safe
Mode?
Laptop Drive Problems
128
Partition manager see drive? All operating system install discs
ship with a partition manager, even if it's a version of the old
FDISK. Some new hard drives sold in retail packages also ship
with manufacturer provided partitioning software. If whatever
partition manager software you have doesn't see the hard drive,
it's either a hardware failure or the MBR (Master Boot Record)
has been corrupted. Before you do anything else, try reseating
the hard drive in the laptop. If that doesn't work, consider
buying a USB enclosure that will allow you to try to read and
recover the hard drive data on another computer. If all else fails
and you don't care about recovering the data, you can try
running the factory formatter at this point if they provide one on
their website, but it will destroy all data on the drive.
Virus rescue work? If you installed virus protection software or a
full protection suite on the laptop, you were probably given the
option to create a bootable rescue DVD or CD (rescue floppies
went out the window with floppy drives). If you created a rescue
disc, this is a good time to try it. If the rescue CD restores your
operating system to a bootable condition, it could be that you
had automatic updates turned off and you've been running with
out-of-date virus definitions. Make sure that you are receiving
daily updates to your virus and spyware protection software. It
could also be indicative of file corruption caused by overheating
or the usual run of hard drive or motherboard issues.
Boots OS CD or DVD? If you can boot the operating system or
factory restore disc that the notebook was sold with, you can try
doing a repair installation, which should leave your file system
and your data intact. Just don’t agree to any prompts which
inform you that your data will be wiped out if you proceed.
Booting the OS CD with a JumpDrive in the USB port may get
you command prompt access to the JumpDrive, so you can back
up critical data if you haven’t done so already. If the repair
installation works, the problem was file corruption, or accidental
deletion of necessary files. If you don't need the data or
programs on the drive or you have them backed up, you can try
the nuke and pave option, telling either the operating system or
the factory restore software to do a new installation. In extreme
cases of corruption, you may need to manually use the
partitioning software to delete the primary partition and then
letting the OS install disc do its thing on the next boot. This will
result in wiping out all data and any programs you installed.
Partition
manger see
drive?
Virus
rescue
work?
Boots OS
CD or DVD?
The Laptop Repair Workbook
129
If you can't get the OS or factory restore disc to boot, try
changing the boot order so that the D: drive is the first boot
device. If that doesn't work, make sure you have a good boot CD
or DVD by trying it in another computer, or getting one that
works in another computer. Don't assume that the disc that
shipped with your laptop is bootable or good, even if it's in the
original packaging and you never used it. Some manufacturer
rescue discs require you turn on the laptop with a particular key
held down, or hit a key combination when the screen lights up.
You'll have to check the Internet for your particular model to see
if this is necessary, though instructions are often written on the
envelope the disc is packed in. If you can't get an OS to boot in
the CD/DVD drive no matter what you try, the drive may be bad
or you could have a board level controller failure affecting both
drives. See the troubleshooting chart for CD/DVD failure.
Any fan or drive sound? If you don't hear anything at all when
you try to turn the laptop on, no little LED's light up, the
problem is rarely related to the hard drive. So if you don't have a
live screen, start with the LCD troubleshooting flowchart, and if
you don't have any activity at all, start with the power
troubleshooting flowchart. Even if the hard drive has failed at
the electro/mechanical level and won't spin up, this won’t
prevent the LED's on the laptop from lighting up, or the LCD
from displaying the BIOS information and complaining about
the lack of a boot device.
Any fan
or drive
sound?
Laptop Drive Problems
130
131
Laptop Internet
Connectivity
Laptop
see
network?
Switch on,
enabled?
Works
on Ethernet
port?
Firewall,
security
blocked?
No Yes
No
No
No
Yes
Yes
No
No
Laptop wireless
adapter fault or OS
software settings.
Try latest driver,
software rescue
Disable
firewall, then
look for specific
exclusions for
network
Password or
verification
selected
incorrect
Default
settings on
router?
Yes
No
Works
security
off?
Yes
Try compatibility modes,
but be prepared to update
older 802.11b hardware
Yes
Yes
No
No
Don’t be
embarrassed, switch
can be turned off in
normal handling
Live
Internet at
router?
No
Yes
If router link good,
settings or laptop
software issue
Even if Internet
LED lit, try power
down router reset.
If link LED never
active, router or
ISP network
problem
Yes
Intermittent
connection?
Yes
Phone,
Bluetooth,
interfere?
Try other
location for laptop,
limiting your own
use of possible
interference
sources
Restore
router defaults
through direct
IP connection.
If connection
not fixed after
rebooting,
continue from
one back
No
Possible ISP problem or
software time-out. More likely
router or laptop hardware, or
weather/wind influence on
incoming land line
Yes
Router
active, in
range?
Same
ver. (b/g/n)
802.11?
Check router defaults set,
no security or MAC addressing,
reboot router. Continued problem
indicate wireless router failure or
incompatibility
Yes
Yes
Laptop
works public
network?
No
Get router
wireless activity LED
blinking, try laptop in
same room
Corporate
networks may be
“hidden” see admin
for settings
Home
network?
See
known good
network?
Reinstall
driver, toggle
hardware, full
reboot if not
done. Possible
wireless adapter
failure, but more
often software.
Try 3rd party
soft fix
No
Reset home router
to defaults. Possible
router failure or
incompatibility
Yes
No
Laptop Internet Connectivity
132
The Laptop Repair Workbook
133
Laptop see network? Does the laptop operating system software
see the wireless network you are trying to connect to? Many
notebooks come equipped with a special manufacturer's
configuration utility, such as Toshiba's ConfigFree, in addition
to standard OS connectivity software, like the "View Available
Wireless Networks" option in modern Windows versions. In
addition, there should be a little wireless icon in the system tray,
which flashes a small bubble announcement when it connects or
fails to connect. Floating the mouse pointer over the wireless
icon in the system tray on a Windows desktop should show the
name of the wireless connection (often a HEX address that looks
like alphabet soup if not changed from the default), the speed
(54 Mbps for 802.11G), the signal strength, and whether a
connection to a router has been established. Note that a
connection to a router does not imply a connection to the
internet.
Manufacturer provided software can provide a much clearer
picture of relative router distances and signal strength. In some
circumstances, especially public networks at hotels, campuses
and coffee shops, your laptop may consistently choose to
connect to a weak router or access point when stronger signals
are available. The manufacturer software usually does a better
job identifying this problem than the five green signal strength
bars of “View Available Wireless Networks.”
Switch on, enabled? When a laptop doesn't see a wireless
network, it's often because the wireless adapter is switched off
or disabled in software. As with volume controls for laptop
speakers, wireless networking can be disabled both manually
and through software, and in more than one place. Most modern
laptops come equipped with a manual switch on the front or side
of the laptop that turns the wireless adapter on or off. There is
usually an LED associated with the switch that will light only
when the laptop's wireless capability is enabled. However, the
LED may remain lit even if the wireless has been disabled in
software, if it is a status indicator for the hardware switch only.
The switch can easily be turned off by accident when picking up
the laptop or when a book or other table clutter comes into
contact with the side of the notebook, so it's a very common
problem.
The easiest place in Windows to tell if the laptop wireless
adapter has been disabled through software is in Device
Laptop
see
network?
Switch on,
enabled?
Laptop Internet Connectivity
134
Manager. One sure sign the adapter is disabled in software (or
not operating properly) is if it doesn't appear in the system tray.
If your laptop wireless adapter is discrete, a USB or PC card
(PCMCIA) plug-in, shut down, make sure it's plugged in firmly,
and reboot. Even if the wireless device is designed to be hotswappable
(plugged in while the laptop is turned on) it's better
to shut down and do it, since this will give the operating system
a chance to reset.
Router active, in range? If there isn't a wireless network in
range, the notebook certainly can't connect to it. It doesn't
matter if your laptop once connected to a network at the spot
you are trying to connect from today, the question is whether or
not there's an active signal your laptop should be picking up
now. The most obvious reason for the wireless router to be
invisible to your laptop is if the router is turned off or out of
range. Next comes the wireless function of the router being
disabled, or the antenna being damaged or missing. If the router
is in another room, something as simple as a door which is
usually open and is now closed can make enough difference in
signal strength to prevent a connection. The best way to start
troubleshooting wireless problems is to take your laptop and
plunk it down right next to the router you are trying to connect
to. If the wireless activity LED on the router isn't on and active,
either wireless has been disabled on the router or the router is
faulty.
Home network? Wireless networks in the home often use the
exact same equipment as those in Internet cafes and small
businesses, but corporate and campus networks use more
sophisticated routers. One of the features some network
administrators of large businesses take advantage of is to hide
their network from casual encounters with the outside world
simply by instructing the routers not to announce their presence
with an "I'm here" beacon. This is one step beyond enabling
security, which would normally be done as well. If the router
beacon is turned off, you'll need to get the exact network setting
from the network admin or another computer on the network in
order to set up the wireless connection.
See known good network? This is the easiest, if not always the
most convenient troubleshooting step. If you take the laptop to
your neighbor's house or to the local cafe with free internet
access, does the laptop at least see the existence of a known good
Router
active, in
range?
Home
network?
See
known good
network?
The Laptop Repair Workbook
135
network through either the OS view or the manufacturer's addon
software? If the laptop can't see a known good network with
the wireless adapter turned on and enabled, the problem is with
the laptop and not with your home router. Try disabling and
enabling the wireless adapter, going through a full OS restart
after each change. Try reinstalling the driver for the wireless
adapter, and check the Internet for the most recent version of
the driver available. The wireless adapter may have failed, but
it's more likely a software problem. Don't rush into downloading
the latest BIOS update for the notebook, especially if the
wireless adapter is built-in, since it should work with the
original BIOS and operating system.
Works security off? The inability to connect to a secured wireless
network is usually due to the security working properly, as
opposed to the way you thought it would work. If the first time
you go to connect, the dialog box gets hung up on "Acquiring
Network Address" you probably got the encryption key wrong.
The first troubleshooting step for failure to connect to a secured
wireless network in the home should always be turning off
security on the router, rebooting, and seeing if the connection
now works. There are several different levels of security
available on most wireless routers, some of which aren't really
thought of as security because they don't include encryption,
such as MAC (Media Access Control) addressing. MAC filters
allow you to establish a sort of a white list for network
connections. The router won't make a connection to any wireless
device that doesn't know it's MAC address (usually included on
the router label). But in the absence of any other security, MAC
filters will allow any laptop that has the MAC address typed in to
connect without further ado.
WPA (Wi-Fi Protected Access) uses real encryption to encrypt
data on the wireless network, making it harder for outsiders to
decode network traffic without the key, often listed as the WEP
(Wired Equivalent Privacy) key. WPA is an improved version of
WEP and has replaced it, but the terms are sometimes used
interchangeably, especially when talking about the key. A lot of
confusion arises from the length of the WEP key and the MAC
addresses which are often typed improperly on the laptop the
first time around. It's also possible to create an unique
encryption key for the router, which the router uses to create
keys for your computers. If your laptop is older than 2004,
there’s a good chance it won’t support WPA unless the network
Works
security
off?
Laptop Internet Connectivity
136
adapter firmware can be updated. Your options are to run
without any security on your router, run WEP, or purchase a
new plug-in wireless adapter for your laptop (USB or PC Card)
that supports WPA.
Works on Ethernet port? Can the laptop access the Internet if
you connect it directly to the router with an Ethernet cable? This
is normally a yellow 100BaseT cable with RJ-45 connectors
provided with the router. If you have trouble wirelessly
accessing the router to create or change settings, plugging
directly in through an Ethernet port or USB (if so equipped) is
recommended. The router may come with setup software, but
it's also common to access the onboard setup software directly
through your browser, which doesn't require a live Internet
connection. You just type the IP address of your router into the
address bar, and provide the default password, assuming you
haven't changed it. Some standard IP addresses are 192.168.1.1
or 192.168.0.1, but it should be easy to Google up the info for
your exact router model.
Firewall, security blocked? One good reason for a laptop to
refuse to see the Internet, even when it's plugged directly into
the router, is that the security settings on the laptop prevent it
from making contact. The variations on what can go wrong here
are far too in depth for a hardware troubleshooting flowchart,
the best test is to disable the firewall software, reboot and try to
connect. Unfortunately, disabling security software, including
firewalls, isn't always easy to do, and may require talking to tech
support at the security software company. If this is a laptop that
belongs to your employer and has been set up to run on a
corporate network, you should talk to your network
administrator before taking any radical steps that may make it
work at home but prevent it from connecting to the network at
work.
Live Internet at router? It's not unusual for new DSL subscribers
to try to set up their network as soon as the kit arrives from the
phone company, before the phone company has enabled the line
for DSL. It won't work. There's just no way your laptop can
connect to the Internet through your router, wireless or not, if
there's no DSL connection between the router and the phone
company. Most routers come equipped with a status light for the
Internet connection. If you cycle the power on the router (if
there's no switch, you can pull the plug) you should see activity
Works
on Ethernet
port?
Firewall,
security
blocked?
Live
Internet at
router?
The Laptop Repair Workbook
137
on the Internet LED as the router negotiates for and gains an
Internet connection. It may take five minutes or longer for a
modem to negotiate a new connection under certain conditions,
so don’t give up too quickly. If the modem can’t negotiate a
connection after being powered up, it should display an error
state. The modem LED reporting a live Internet connection
doesn't absolutely guarantee that the connection is good or that
the router is functioning properly, but the problem is much
more likely to be on the laptop end.
If the LED doesn't show an Internet connection, get on the
phone with the ISP, usually the telco or cable company. The
fault could be with the ISP, it could be with the router, or it
could be with the land lines. While a land line problem is the
responsibility of the ISP if it’s outside your house, it doesn't hurt
to walk outside and see if there's an obvious tree branch lying on
the line or something, just so you'll know for sure what the
problem is. In the case of DSL, if the telephone still works, the
line should be OK, as long as you didn’t damage the line to the
modem or unplug it from the wall. With a cable modem, if the
TV works, the cable connection to the house is good, and any
cabling problem would be with the line to the modem. If you're
a new DSL customer and you live too far from the telephone
company switching gear, it's possible that DSL won't work in
your location, even though they delivered the equipment and
turned on the service.
Default settings on router? Don't trust your memory, restore the
router settings to default through the router console accessed by
the IP address or accompanying software. Unplugging the router
does not reset the defaults, which are stored in non volatile
memory. If restoring the router defaults, cycling the power and
rebooting the laptop doesn't allow you to connect, just go back
one step and continue, answering "Yes" to default settings at the
router.
Intermittent connection? The most frustrating problems to
troubleshoot on wireless networks are intermittent connections.
Logic seems to dictate that if it works sometimes, it should work
all the time, but mismatched hardware or protocols can result in
intermittent operation, as can interference, failing hardware, or
a poor signal from the ISP. However, the most common reason
for intermittent connections is a weak signal that appears to be
stronger than it actually is on the reported signal strength.
Default
settings on
router?
Intermittent
connection?
Laptop Internet Connectivity
138
Probably the best indicator of a marginal wireless signal is slow
operation, but if your notebook came equipped with a utility
that truly shows the relative strength of signals and your
connection is usually on the borderline, a weak signal is likely
the problem. Relocate the laptop closer to the router or move
the router to a more central location in the workspace.
Same ver. (b/g/n) 802.11? The IEEE standard for wireless
Ethernet networks using 802.11 versions b,g,n and y are
supposed to be backwards compatible, but in practice, not all of
the hardware produced lives up to the standard. In fact, when
you get into using repeaters, it's best to keep to one family or
brand of products for all of your wireless broadcast equipment.
Most newer notebooks have 802.11 b/g/n wireless capability
built-in and they will normally work with older routers, but
older notebooks and PC adapter cards of the 802.11b generation
often have trouble with 802.11g routers. Some routers default to
the pure 802.11g or 802.11n mode unless you specifically choose
the backward compatibility modes, and doing so may degrade
performance for all users.
Laptop works public network? Once you've done all the
troubleshooting you can at home and possibly at a friendly
neighbor's as well, the last test is to drag the laptop out to a cafe
or other location where a wireless network is offered as a draw
to customers. If your laptop does connect on the public network,
it indicates that the problem is either with your router hardware,
your ISP, or the router settings. Even though you've restored the
default router settings by this point, make absolutely sure
wireless is enabled and security is disabled.
If your laptop won't connect to the public network, it's entirely
possible that your wireless adapter is at fault, you can try a USB
or PC card wireless adapter if you're willing to have it sticking
out of the side of the notebook. But most of the time the
problem will be software. Either the wireless adapter is, in fact,
disabled in some way you haven't been able to spot, the driver
version isn't the best for the adapter model (even if Device
Manager appears happy), or there's some corruption in the
networking settings that you can't figure out. If you search the
web, there are some free third party utilities you can run to fix
the registry, the network stack and network settings by resetting
them to defaults, and which report out on the process if they
find errors.
Same
ver. (b/g/n)
802.11?
Laptop
works public
network?
The Laptop Repair Workbook
139
Phone, Bluetooth interfere? If your wireless connection slows
down or gets flaky when you or somebody else in the household
is using a cellular phone, Bluetooth device or other RF emitter,
the problem is interference. There is no cure other than trying to
increase the distance between the laptop and the interfering
device or not using the interfering device when you're on the
Internet. However, interference is a much less common problem
than flaky hardware, an intermittent signal from the ISP due to
land-line or weather conditions (rain degrading signals or wind
knocking the cables around on the poles) or software timeouts.
Overheating hardware can lead to intermittent operation, as can
loose connections and power interruptions. Keep in mind that a
properly functioning laptop has its own built-in UPS
(Uninterruptible Power Source) in the form of the main battery
that should provide seamless operation so you might not even
notice if your power grid is suffering from brownouts or even
mini-blackouts. The router, however, may be resetting every
time the power glitches, and then requiring a few minutes to
reestablish the Internet connection each time.
Phone,
Bluetooth,
interfere?
Laptop Internet Connectivity
140
141
Motherboard,
CPU, RAM
Failure
Live
screen?
No
LCD
diagnostic
done?
Display
Failure
Chart
Done
overheating
diagnostic?
Runs
stripped?
CPU
swap
work?
Cabling failure,
short or binding
in laptop body
Bad CPU,
monitor voltage
and temperature
after
replacement
Motherboard
failure
Power
diagnostic
done?
Power
Supply
Chart
No Yes
Yes No
No
No
Yes
No
Yes No
Freezes
on boot
screen?
Boots
w/o external
connex?
CPU
heatsink
active?
Install new
heatsink, connect
fan. May be too
late for CPU
Yes
Yes No
Yes
No
No
Yes
Demands
password?
BIOS password,
cleared with jumper,
or RTC battery
removal
OS
load takes
forever?
Hard
Drive
Chart
Random
reboot?
Main
battery
in?
Random
freeze?
Ruled
out software,
virus?
Run latest virus doctor,
limit tasks. Check resources
drive space, RAM
Loose
connections,
vibrations,
overheating
Port,
peripheral
failure?
Symptom not
identified, but
probably related
to software
Try running
with battery or
UPS
Forgets
CMOS, loses
time?
Replace
RTC battery
with exact
match
Yes
No
No
Yes
No
Yes
Yes
Yes No
Yes
No
Yes
No
No
Overheating
Chart
Peripheral
device or
driver issue
Swap
RAM fix?
Good, if pair,
replace both
Replace
or bypass
Yes
Yes
No
Yes
Hear
beeps?
No
Yes
Count,
Google code
Motherboard, CPU, RAM Failure
142
The Laptop Repair Workbook
143
Live screen? Does the screen show any signs that the laptop is
alive and thinking? If it does, the motherboard hasn’t failed
outright, though it may turn out to suffer from partial failure or
intermittent problems. If you get nothing on the LCD but the
system works fine if you connect it to an external monitor, you
should skip to video diagnostics from this point.
Power diagnostic done? Do you see any LEDs flashing, hear any
beeps, drives spinning up, fans, etc. Laptops are all equipped
with status LEDs, normally including an LED for power on, an
LED showing the AC Adapter is attached and functioning, and
an LED to show the battery is present and charging. If the power
isn't coming on, proceed to power failure diagnostics. If the
power diagnostics sends you back here, continue following
through the diagnostic steps.
LCD diagnostic done? If you haven't performed the video failure
diagnostics for a dead screen yet, do so now. Remember that in
the vast majority of laptop computers, the video processor
shares the same physical memory modules with the CPU. If the
diagnostic points to a video processor failure, make sure to
search the Internet to see if it’s a characteristic failure for that
model with a possible workaround, like reflowing the solder.
Done overheating diagnostic? This is particularly important in
the case of dead screen troubleshooting if the problem only
occurs when the laptop is warmed up. All of the components in
your laptop are subject to failure if the laptop gets too hot,
including vital motherboard components, the CPU and the
RAM. If your laptop is overheating and you ignore the fact, you
might properly diagnose the component that is failing when it
gets too hot and replace it, but unless that component was itself
responsible for the overheating, you've treated the symptom
without finding the cure.
Swap RAM fix? Many technicians will start troubleshooting any
dead screen or no boot failure by swapping out the memory,
because it's easily done and it's often at fault. If you have two
RAM modules installed you can try running one and then the
other, and if you can borrow a compatible module from a friend,
it will rarely damage their RAM to try it in your system. While
we hate to recommend you go out and purchase a part just to try
it out, a replacement memory module for your system may run
as little as $20. If your existing RAM turns out to be good and
Live
screen?
Power
diagnostic
done?
LCD
diagnostic
done?
Done
overheating
diagnostic?
Swap
RAM fix?
Motherboard, CPU, RAM Failure
144
the problem is solved later on, you’ll be able to install the spare,
increasing your capacity and performance. For most home users
who have never taken a laptop apart before, swapping the RAM
is a good gamble before we get to taking the laptop completely
apart.
CPU heatsink active? All modern laptop CPUs require a
heatsink, and most of these are an active heatsink, with a fan on
top, or a hood over the CPU heatsink with a fan blowing air
through. Laptops offer heat and power management at both the
operating system and BIOS level. You may be able to set the
exact temperature in CMOS Setup for which you want the fan to
come on or the system to warn of thermal overload and shut
down. In the operating system, you can generally tweak the CPU
settings so it consumes less power (resulting in lower
performance and less heat) or for quiet operation, which limits
fan usage.
If you just installed a replacement CPU and powered the system
up with no heatsink as a test, you may have damaged the new
CPU already. If the fan on your active heatsink isn't spinning up,
replace the fan and hope for the best. Make sure to confirm the
new heatsink fan is operating after replacement since it could be
the power point on the motherboard that's failed. You should
never need to replace the heatsink itself unless you break the
hold-down mechanism, since it’s just a chunk of metal. If you
replace the entire active heatsink, make sure that it’s designed
for your specific model, or it may fail to contact the CPU even
with the proper application of thermal paste, guaranteeing
failure.
Hear beeps? If you have a system that powers up, the next
question is, do you hear any beeps coming from the laptop. If
your motherboard doesn't have a dedicated piezoelectric
speaker for beep codes, it will use the built-in laptop speakers.
The beeps should come in repeated patterns, so many in a row,
and then repeated. Write down what you hear and then head to
Google and search for the translation of the code. If you hear an
unending string of beeps, it's often bad RAM if the screen is
dead, or a keyboard failure if the screen is live. Depending on
the manufacturer, you might also get specific beep codes for
CPU failure or video processor failure. Many beep codes have
been abandoned since they pertained to non-user replaceable
CPU
heatsink
active?
Hear
beeps?
The Laptop Repair Workbook
145
surface mount components. It never hurts to shut down and
reseat the system RAM if you're getting a beep code.
Runs stripped? Bench testing laptop motherboards is quite
different from bench testing PC motherboards because laptops
are engineered as a unit and it's not easy to run the motherboard
out of the case. The option is to simply strip everything not
essential for a live screen out of the laptop to ensure that there
isn't a problem with a component that is putting an undue
mechanical stress or electrical load on the motherboard. The
RAM and the CPU need to remain installed, but you can remove
the hard drive and the DVD drive, and if you're ambitious to
take the whole laptop apart, you can try for a live screen without
the keyboard or any non-essential daughter cards installed. You
should always unplug the AC adapter and remove the battery
while working on the laptop, but you'll have to plug the AC
adapter back in again to attempt to boot.
CPU swap works? If you still have a "no signs of life" situation
with the motherboard powered up and stripped down, it’s either
a motherboard component failure or the CPU. Swap in a known
good CPU if you can get one dirt cheap or free, not forgetting to
install a good heatsink and to connect the fan, even just for a
quick test. You need to find a CPU that's supported by the laptop
BIOS, it's not enough to find one that mechanically fits the
socket, assuming the CPU isn't soldered into place! The only way
to determine what CPUs are appropriate is to check your user
manual or do a little research on the web. Think twice and three
times about the value of your laptop before spending real money
on a new CPU, since you’re just gambling the problem isn’t a
motherboard failure. If your old CPU is bad and the heatsink fan
is dead, it's a pretty sure bet that the dead fan caused the CPU to
failure.
You can identify many motherboard component failures with a
decent magnifying glass. They’ll show burnt or melted spots,
discoloration, or be carbonized right out of existence. Some
discrete motherboard components such as capacitors and power
semiconductors are replaceable with a good soldering iron,
though there’s always a chance they’ll pop again as soon as you
power up if the fault lay higher upstream. Other surface mount
components are barely visible to the eye, require an insider’s
access to replacement parts, and expensive soldering equipment
to attempt to install.
Runs
stripped?
CPU
swap
work?
Motherboard, CPU, RAM Failure
146
There's no point in calling the manufacturer to price a new
motherboard if you determine it's the most likely problem.
Laptop motherboards are specific to the model and family, and
the manufacturers charge you almost as much as a brand new
laptop for most replacement motherboards. If the laptop is
relatively new or beloved and you really want to keep it going,
the best option is to try to find a replacement motherboard on
eBay from a pull, from another failed laptop with a different
problem like a bad LCD. There's always the risk the replacement
will be bad as well, but in shopping, you may find that a second
hand working laptop of your exact model is available for less
than you would have thought. You can buy it and move your
hard drive over in a jiffy, but make sure you don't end up paying
as much as the price of a new, superior notebook.
Freezes on boot screen? Does the system power right up, give a
happy beep or two, then freeze on the BIOS screen? First try
removing any external connections, including your networking,
cellular modem or dial-up modem cord, printer cables, anything
that wasn't attached to the laptop when you took it out of the
box for the first time. If this allows the laptop to boot, the
problem is either with one of the peripherals you disconnected
(check by process of elimination) or with the software driver for
that peripheral. Windows based systems may automatically start
in Safe Mode after being powered down and rebooted if the
problem was with a driver.
Demands password? Does your system power right up and
demand a password? We're talking about pre-OS load here (a
BIOS screen password), not a Windows password. This normally
pops up in a small text box in the dead center of the screen,
which may be dark but for the box. Some newer laptops are
equipped with fingerprint scanners or other biometric locks, but
these give you the option to type in a password as a fallback. If
you know that a password is set but you've forgotten it, you may
be in for a headache. It's also possible that somebody in your
family ended up entering CMOS Setup and set the password by
accident. Unfortunately, if the machine is asking for a password
on boot, it may also demand a password to access CMOS Setup
in order to disable it.
Check with the manufacturer's tech support and do a Google
search to see if there's a workaround before taking the laptop
apart. Desktop motherboards come equipped with the
Freezes
on boot
screen?
Demands
password?
The Laptop Repair Workbook
147
equivalent of a "Forget Password" jumper, but laptops usually
aren’t that friendly. There's a good chance that the password is
cleared by removing the RTC (Real Time Clock) battery that also
preserves the CMOS settings. You should search the web for
instructions for your model, as it may involve a whole complex
sequence of events, like removing the RTC battery, AC adapter
and main battery and then holding in the power switch.
OS load takes forever? Does the OS load take forever or does the
system get as far as complaining about a missing boot drive, a
bad disk, missing operating system, no boot partition, anything
similar? If you get any of these messages, proceed to hard drive
failure diagnostics. If the system doesn't freeze on the BIOS
screen, but doesn't start loading the OS either, it could be a
rapid overheating problem with a critical motherboard
component, but the odds are still with software. One check is to
change the boot order in CMOS to boot the DVD/CD drive first,
and to try a bootable disc. If the disc boots and the laptop sits
quietly without freezing up, the problem is with the hard drive
or installed software.
Random reboot? Does the system reboot itself for no apparent
reason, either during the boot process or at any point once
you're up and running? Random reboots are often caused by
mechanical or thermal problems. Mechanical problems include
little bits of conductor flopping around inside the laptop,
vibrations caused by airplanes, tapping your foot on the floor or
typing on the keyboard! Remember that the whole laptop is
crammed into this narrow little box and the connectors are fairly
fragile. You can eliminate flaky mechanical issues by trying a
USB keyboard and mouse and not touching the laptop while
operating. If that solves the problem, you know the reboots are
due to vibration. For thermal problems, see the overheating
flowchart.
A random reboot is sometimes caused by a Windows operating
system setting. This can be solved by going to System Properties
and selecting the Advanced tab, then the Settings tab under
Startup and Recovery. Clear the checkmark under System
Failure – Automatically Restart. It might solve the problem, or
it might lead to a BSOD (Blue Screen of Death) error that helps
diagnose the underlying cause, often RAM.
OS
load takes
forever?
Random
reboot?
Motherboard, CPU, RAM Failure
148
Main battery installed? If not, try running with the battery
installed, or try running your AC adapter though a UPS
(Uninterruptable Power Supply). The problem may be with your
electrical power grid, either brown-outs, surges, or poor
regulation. Testing with the battery installed makes more sense
than running out and buying a UPS, unless you have one
available, but some laptop owners see extending battery life by
storing it in ideal conditions when not traveling as half the fun
of ownership.
Ruled out software, virus? If you don't have an up-to-date
malware protection suite installed, including anti-virus, antispyware,
and anti-adware and a firewall, you haven't even begun
to eliminate invasive software as the root of your problem.
Installing all of this protective software after the fact will usually
make you aware of a malware problem, but it may be too late to
cure it without extensive Google research on your part. The
"good" software is designed to keep the "bad" software out.
Getting rid of “bad software” once it's established on your laptop
is more dicey.
Software lock-ups can also occur because of data corruption or
operating system registry confusion. While reinstalling the
operating system and starting over from scratch is the dodge of
somebody who can't pinpoint the problem, it's often the only
practical solution for the casual laptop user. You should run the
standard operating system clean-up chores before giving up.
Windows offers a number of hard drive maintenance tasks
under System Tools.
Random freeze? Is your laptop suffering from random lockups?
We're talking about lockups that you need to power off and on to
clear. If you can CRTL-ALT-DEL your way out of a lock-up, in
fact, if you can get any response with it at all, it's more likely a
software conflict or incompatibility. Although the CPU, RAM
and motherboard are all candidates for intermittent lock-ups,
the hard drive and motherboard connections are also possible.
Overheating is always suspect in random lockups.
If you call tech support with these symptoms, they may
recommend that you flash the BIOS to the latest version. The
procedure is simple, you download the software from the
manufacturer's website and the process is automatic when you
run the program, but BEWARE. If you grab the wrong version of
Ruled
out software,
virus?
Random
freeze?
Main
battery
in?
The Laptop Repair Workbook
149
the BIOS off the web, if the manufacturer has made a mistake, if
you can't quite determine which revision of a motherboard you
have, or if the process gets interrupted in the middle by a power
spike, etc, you can lose the motherboard. In other words, if the
BIOS doesn't get completely installed or isn't correct, you can
never boot the system again to fix it. But if you've concluded that
the only option is buying a new motherboard or a new laptop,
it's worth a try.
If the problem is with an external peripheral, the first step is to
inspect and reseat the cable connecting the device to the laptop.
If it’s a USB peripheral, the best test of both the device and the
cable is to connect to another computer and see if it works. If it
does, the problem is with the port hardware or the driver (see
the keyboard, mouse and USB troubleshooting flowchart). If the
port is physically loose or damaged, the repair requires
resoldering or replacing on the motherboard. Try a different
USB port on the laptop and try reinstalling any driver software
for the device.
Forgets CMOS, loses time? If your laptop keeps forgetting the
time and the date, or gives you an error message about CMOS
settings every time you power on, your RTC (Real Time Clock)
battery has probably died. This battery is entirely distinct from
the main battery that powers your laptop or the auxiliary battery
some laptops featured for preserving memory in suspend states.
It's a little battery mounted on the motherboard, usually a small
disk like a wrist watch battery, and while they are widely
available and inexpensive, gaining access to the motherboard to
do the job can be a nightmare in some laptops. If you don't have
a user’s manual with step by step instructions, search the web
for a photograph illustrated guide for your exact model family.
Boots w/o external connex? If the laptop boots up fine when
you power up without any external connections, the problem is
with the external device or with the software driver for it.
External connections here include anything that isn’t part of the
basic laptop, including: docking stations, port replicators,
security devices, PC cards, USB devices, telephone and
networking cables, an external video connection, speakers or a
microphone. Don’t start trying to analyze why the device can’t
affect boot in your case, just try without it.
Forgets
CMOS, loses
time?
Boots
w/o external
connex?
Port,
peripheral
failure?
Motherboard, CPU, RAM Failure
150
151
Laptop Modem
Failure
Does
modem
dial?
ISP
pick up?
“No dial
tone”?
Busy or
ringing?
Confirm ISP’s
phone number,
area code and
prefix for outside
line
Try dialing
on pulse
Yes
Yes
Yes No
No
Gets
online?
ISP
confirm user
info?
No
Yes
Get valid user
name, password
from ISP
Connect
at lowered
speed?
Yes
Yes
No
Connect
to different
ISP?
Try outside
network interface,
test with other
laptop or PC, try
USB modem
Re-check login
info, modem
compatibility
No
No
Yes
Connect
live line to
modem port
No
Best driver
installed?
Yes
Device
Manager report
problem?
Download
latest driver
from web
Pass
OS modem
test?
Reboot,
try again.
Try replacing
with USB
modem
Yes
Yes
No
Yes
No
No
No
Remove
any PC cards
or USB
peripherals
Locks
up online?
Yes
Sends
faxes?
No
Crtl-Alt-Del,
end task?
Yes
Upgrade browser,
run fewer tasks when
online
Yes
Use web faxing or
USB fax modem if
not fax capable
Yes
No
Problem likely
software related
ISP or line
conditions,
especially
weather, time of
day, or house
wiring.
Frequent
line drops?
Motherboard
CPU RAM
chart
No
No
Port in
use?
No
Software
conflict
Yes
Laptop Modem Failure
152
The Laptop Repair Workbook
153
Does modem dial? The first question for a dial-up modem is,
does your modem actually dial the phone? Some laptops feature
a little piezoelectric speaker on a modem/network daughter
card, but others use the laptop speakers as a modem
annunciator. Many people (and computer vendors) turn down
the volume for this in software, which on Windows machines is
buried somewhere in the modem properties reached through
Control Panel. For laptop computers that run the sound through
the speakers, the volume controls in Windows and any exterior
volume controls must be turned up. If you can't hear Windows
chimes, music CD's, or downloaded audio through your
speakers, odds are you won't hear the modem dialing either.
ISP pick up? You should be able to hear the ISP's modem pick
up and whistle and hiss back at your modem through the
speaker. If not, make sure you are dialing the right phone
number and that the ISP isn't temporarily down. Just dial the
number from a regular phone handset and the ISP modem
should pick up and whistle or hiss at you. Make sure you have
the area code and any prefix for an outside line correct,
especially if you are dialing from a business. Dial-up lines in a
business must have a clean path through a business phone
system (PBX - Private Branch eXchange), just like fax lines.
Dialing "9" for an outside line is quite common in small business
settings. If the phone is always busy, call the ISP's tech support
or try one of the other phone numbers they provide. It could
simply be that they don't have enough modems available for the
traffic in your area at certain times of day.
Busy or ringing? If you hear the modem dial but the dial tone
remains steady until an operator recording picks up and tells
you that your phone is off hook, you're trying to use "tone"
dialing on a "pulse" system. This is easily changed in the
"Dialing Properties" of the basic modem page in Control Panel
of Windows systems. If a stranger picks up the phone and yells
at you, you’ve dialed the wrong number.
Gets online? If you get an error stating that the ISP can't
negotiate a connection, protocol, or anything along those lines,
you definitely aren’t getting online. Unfortunately, this error is
too generic to help much with troubleshooting. Even messages
telling you to check your password can be caused by just about
anything. Try redialing several times without changing anything
Does
modem
dial?
ISP
pick up?
Gets
online?
Busy or
ringing?
Laptop Modem Failure
154
to make sure you aren't just encountering an overloaded modem
pool.
ISP confirm user info? Call your ISP on the phone to confirm
your login information if it's the first time you're dialing in. Reenter
your password, remembering that caps usually count.
Assuming you have your username and password right, the odds
are any errors reported aren't due to any protocol settings on
your part, especially if you haven't changed the defaults. If the
error crops up at random, it's usually due to the weather and the
time of day, as both play a major role in the circuit conditions of
the telco infrastructure. Stormy or damp weather can badly
degrade the lines of older telephone networks. The time of day is
also important, with the beginning of the business day, and a
period in the mid-afternoon usually being the worst times.
Connect at lower speed? Does your modem connect at a speed in
the 20 Kb/s to 40 Kb/s range? The connection speed is usually
announced on screen before the connection window disappears,
and can be checked at any time through the connection icon in
the system tray. There are several possibilities, but the most
likely is that your modem is capable of a much higher
connection speed than the circuit, for various reasons, can
support. A long delay in getting online is due to endless
negotiation between your modem and the ISP modem as they
slowly ratchet down the speed on both ends until a satisfactory
error rate is reached. This could be due to a failing modem, but
it's more often infrastructure or line conditions that limit
connection speed.
Your connection speed will always be lower than the 56 Kb/s
modem rating in the U.S. because it’s limited to 53 Kb/s by law.
Laptops with 56 Kb/s modems should get connections ranging
from 48 Kb/s to 53 Kb/s in ideal conditions. If your speed is
always lower, it could be that your modem speed is actually set
too low in software, or that you are using some error checking or
compression algorithm that isn't ideal for the circuit. Make a
note of all of your current settings before you start making
changes, and note that in some cases, you'll have to reboot
before they take effect. Make sure you check the Extra Settings
field in the modem connection Advanced Properties menu in
Windows. It could also be that your phone wiring simply isn't
going to support a higher speed, that you are too far from the
central office, or they just haven't upgraded their infrastructure
ISP
confirm user
info?
Connect
at lowered
speed?
The Laptop Repair Workbook
155
to support digital signaling, in which case you'll never get a
connection over 33K. If you’re traveling away from your usual
modem pool, it could be that the local ISP doesn’t fully support
higher speeds.
Connect to different ISP? The best test for eliminating modem
failure is to see if it will connect to a different service. If you can
connect to a friend's ISP or a free bulletin board, it's a definite
proof that the modem isn't bad. If you can't connect to another
ISP, it doesn't prove your modem is faulty, it could still be a
problem with line conditions, standards or logins. But if you can
use another laptop or PC to connect over the same line to the
ISP, the problem is clearly in your laptop.
No dial tone? If the software reports, "No dial tone", you have to
test if the phone line is live or if an off-hook phone elsewhere on
the circuit has caused the line to drop. Check the phone jack at
the wall with a telephone handset. If the wall jack is good, try
changing the telephone patch cord running from your laptop
modem port to the jack. If the wall jack is dead and the other
phones on the circuit work, you need to repair the in-wall wiring
or use a different jack.
Best driver installed? Have you installed the most recent modem
driver you can find on the laptop manufacturer's web site? Even
if your laptop is brand-new, they sometimes ship with obsolete
drivers, either because your model is a close-out that has been
sitting on the shelf somewhere for a year, or because problems
with the driver software have been discovered since your unit
was manufactured.
Device Manager report problem? The status of the modem
hardware and driver as understood by the operating system
appears in Device Manager in Windows. There's not much
likelihood of a conflict with another device in a laptop since they
are engineered to work together, but it's a good idea to try
unplugging all external devices while troubleshooting. Try
finding an updated driver on the manufacturer’s website and
installing. Try the interactive troubleshooting wizard in Device
Manager. If you can't resolve the Device Manager problem,
either the modem is bad or the daughter card (if your model
features a separate card for the modem and networking) has
come loose in its connector. Check your owner’s manual or the
web to see if the latter is a possibility, and if so, find exact
Connect
to different
ISP?
“No dial
tone”?
Best driver
installed?
Device
Manager report
problem?
Laptop Modem Failure
156
illustrated disassembly instructions for your model before you
attempt to check. Before trying, identify what other components
are on the daughter card (like a 100BaseT network connection),
and if they still function, it's unlikely that reseating the daughter
card will help.
Port in use? Does the operating system or dialing software
report the port is "in use" when you try to dial? Try shutting
down and rebooting. The "port in use" error is due to another
active software application claiming the port the modem is set
on. You could get this error if you're already using the modem
but don't realize it for some reason, but it's more likely that
you've recently installed obsolete software for synchronizing an
old palm device or a camera that's colliding with the modem
driver.
Pass OS modem test? In Windows Control Panel > Modems and
Phones, find the "Diagnostics" tab (exact location varies
between Windows versions) select your modem, and look for an
option like "Query Modem" or "More Info." If Windows can't
talk to the modem and get a response, without the modem being
hooked up to anything, the modem hardware is bad or the
daughter board carrying the modem is loose.
Frequent line drops? Do you suffer from frequent disconnects?
The first thing to check if you have line drops is whether you
have call waiting and a modem/ISP that doesn't support call
waiting. If you don't have call waiting, line drops are usually a
result of the ISP being over burdened, or really bad line
conditions. The ISP will rarely admit that their system is
dropping lines, so it's a tough one to diagnose with 100%
certainty. There's nothing you can do about the telco
infrastructure, but you can get the cleanest connection possible
in your house by reducing the number of connections between
your laptop and the incoming phone line. You can also try
running your modem at a lower speed. You may determine that
the problem is with the infrastructure of the telephone company
or some other external factors, such as the wiring in your part of
town being routed alongside an incredibly noisy electrical
transformer, etc. There's nothing you can do about the weather,
but you can work around the time of day problem by identifying
the good times to call in and sticking with them.
Port in
use?
Pass
OS modem
test?
Frequent
line drops?
The Laptop Repair Workbook
157
Locks up online? Does the whole computer sometimes lock-up
when you're online, forcing you to shut down and reboot? If it
always happens at the same web site, then it's probably an
incompatibility with the web browser version and software plugins.
You may need to enable Java Script or download and install
a browser upgrade to access certain sites. The important point
is, if the lock-up only occurs on certain sites, it's not a modem
issue.
Ctrl-Alt-Del end task? If you can get a live task list with Ctrl- Alt-
Del, shut down the browser and continue, it's probably a
software conflict or an incompatible web application. Browsers
sometimes lock-up if you try to access your favorites list before
the browser has finished loading. You could also be suffering
lock-ups due to RAM or CPU overheating problems, so take a
look through the Motherboard, CPU and RAM Failure
diagnostics.
Sends Faxes? Do you want to send or receive faxes but you can't
figure out how? The first thing to check is whether or not you
have a Fax/Modem. If it wasn't sold as a fax/modem and the
driver doesn't identify it as a fax modem, it's not a fax and you
can't directly use it to send and receive faxes. You can still use a
web based fax service or buy a USB fax/modem. If your laptop
does include a fax/modem and can't fax, it's just a question of
installing (or finding) the proper software, which should have
come on CD with the fax/modem.
Locks
up online?
Crtl-Alt-Del,
end task?
Sends
faxes?
Laptop Modem Failure
158
159
DVD/CD Playback
and Record
Tray
ejects?
BIOS
register
drive?
Pin
hole drive
face?
Remove drive,
faceplate
Remove battery
and unplug AC
adapter. Insert pin,
pull tray
Yes
Yes No
No
Yes
Reads
DVD/CD?
Plays
movies and
music?
Drive
vibrates,
noisy?
No
Eject and remount.
Try
another disc
Yes No
No
Yes
Burner Yes
problem?
Boots
disc?
Change CMOS boot
sequence, pre-spin
drive, test disc
Read
other
discs?
Clean disc with
flannel, check for
scratches
No
Yes
No
Yes
Drive not seated
or hardware
failure
Spins up?
No
Check power,
latching
No
Check discs
other computer,
try cleaner
Yes
Device
Manager
OK?
Yes
Re-install driver,
check cabling,
reseat drive
No
Software issue.
Check DVD codex,
protection, mixer
for audio
No
ID
recorder,
detect
disc? Update software,
update recorder firmware.
Check single-sided disc is
upside up. Try new disc,
different brand, type
Starts
recording
process then
fails?
Yes No
Disc
plays in other
drive?
Sole
task?
Run as sole
task. Check
task list by
ctrl-alt-del,
close systray
programs
Data source too
slow (try Defrag hard
drive), task being
interrupted, or burner
or media bad
Yes
No Yes
No
Yes
Try using write-only media
(CDR), especially for music
CDs. Check other recorded
discs in target device
No
Yes
Symptom
undetermined.
Likely software
related
Power
enabled?
Yes
Check system
tray or icon
No
DVD/CD Playback and Record
160
The Laptop Repair Workbook
161
Tray ejects? The most basic and potentially most disastrous
problem that can occur with a CD or DVD drive is a stuck tray.
Will the tray eject when you press the eject button? Press it
once, like a doorbell, and then move your finger away, or you
may be sending it repeated open and close commands. The drive
won't pop right open if it is actively playing a disc. If you're
trying to eject a disc using software (clicking on a software eject
button on the screen) and it doesn't work, try the manual button
on the drive.
BIOS register drive? If the tray still doesn't eject, reboot again
and note whether the BIOS registers the drive. Some laptops
don't report installed hardware on a boot screen, so you'll have
to access CMOS Setup to check. If the BIOS doesn't register the
drive, it's dropped dead or there's a problem with the controller
(motherboard) or the connection in the bay. Reseating the drive
in the bay is the next step, easy if it's a swappable bay, a little
harder if it's held in with a screw from the bottom of the laptop.
Power Enabled? If the drive is registered by the BIOS and
doesn’t show any errors in Device Manager, you really may have
a stuck tray. But the first step is to determine if the drive has
been locked in software and the eject button has been disabled.
Laptops often give the user the option to disable power to the
optical drive in order to save a little battery juice or to prevent
the tray from ejecting when you least expect it. Disabling the
optical drive power really isn’t a bad policy if you rarely use it, as
it helps to protect the tray, which is fragile when it extends from
the drive. Another test is to see if the eject button works
immediately after powering up the laptop, before the operating
system has a chance to load.
Pin hole drive face? The next step is to look for a pinhole on the
front of the DVD/CD drive. Power down the laptop, unplug the
power cord and remove the battery. Straighten out a couple
inches worth of paper clip, the heaviest gauge that will fit in the
hole. Gently push the paper clip straight into the hole, until you
feel it depress the release mechanism. This will sometime cause
the tray to pop out a fraction of an inch, other times you will
have to pry it a little to get it started. Once you have enough tray
sticking out to grab it with your fingers, you should be able to
pull it out, though it can offer quite a bit of resistance, and you
may damage whatever disc is inside. If the faceplate seems to be
bulging as you pull, the disc is hung up on it, and the best thing
Tray
ejects?
BIOS
register
drive?
Power
enabled?
Pin
hole drive
face?
DVD/CD Playback and Record
162
to do is remove the drive from the laptop and then remove the
faceplate.
The faceplate is normally held on by simple plastic clips working
from the inside out, or attached with tiny screws. Depress clips
into the side of the drive while removing the faceplate so you
don't break them off. If you have removed the drive from the
laptop, tried the manual pinhole release, removed the faceplate
and still can't get the tray out, you have a problem. If there's a
mechanical failure, it probably isn't repairable without access to
special tools and parts. If the drive contains a valuable disc, you
should be able to dismantle the drive to the point where you can
rescue the disc without scratching it.
Reads DVD/CD? When you mount a disc, whether a movie,
data, software or music, does the drive acknowledge that a disc
is present and let you view the contents? It doesn't matter at this
point of the troubleshooting process whether or not you can get
through installing the software on the disc, play it properly, or
read all of the information. The question is simply, can the drive
see anything at all on the disc?
Read other discs? Try a stamped factory disc, as opposed to a
recordable disc. If it works, the problem is with the media and
not the drive. Clean the problem disc with a soft bit of flannel.
The discs are plastics, so don't use solvents. Scratches can
render a disc unreadable, including scratches on the label
surface, which can cause distortions in the optical layer that is
actually being read from the bottom. Try the disc in another
reader before chucking it out, it could just have trouble with the
drive in your laptop.
Spins up? As long as the power to the drive is good and it
responds to the eject button, it should give any disc a
preliminary spin as soon as it’s installed so it can inform the
operating system what’s there. The drive should go through the
motions of doing this even if the disc itself is faulty or there are
problems with the drive in software. The LED on the drive or the
LED on the laptop that shows DVD/CD drive activity (if so
equipped) should be active when the drive spins up.
Device Manager OK? Does your laptop drive show up as
operating properly in Windows Device Manager. Are there any
little symbols next to it, like a red “X” or error messages shown
Reads
DVD/CD?
Read
other
discs?
Spins up?
Device
Manager
OK?
The Laptop Repair Workbook
163
with the drive? If so, the first step is to reinstall the driver.
Download the latest driver from the manufacturer's website and
install it. If you’ve upgraded to a new version of the operating
system, or have allowed automated updates to the operating
system over the Internet, your existing driver may turn out to be
incompatible. If Device Manager only reports a problem with
the hardware after the most recent driver is installed, you can
try to remove it and reinstall the old driver. Check the Internet
for a firmware upgrade for the drive, though it really shouldn’t
be necessary for basic compatibility. If that doesn’t help and you
don’t have another laptop available to test if the drive still
works, you might want to consider replacing it with an external
USB drive rather than buying an exact replacement. The
problem could turn out to be a broken connector or failed
controller on the motherboard.
Plays movies and music? If a drive won’t play a movie but can
read DVD data discs, or won’t play music but can read CD data
discs, the problem is due to software. The media player you are
using may display a specific error message, like telling you the
screen properties must be set to a certain resolution and number
of colors for a movie to play. Or, the player may report that it
can’t find a decoder (CODEC) to play the particular disc. Even if
the movie worked last night, your media player may have
received an automated update the next time you went online
that rendered the installed CODEC obsolete. If you search the
Internet, you’ll find plenty of people trying to sell you CODECs,
but if you use Google and stay away from the advertisements,
you should be able to get the updated version for free.
You may also encounter new copy protection schemes that
render some discs unplayable on your laptop, even though you
aren’t trying to copy them. The only solution for this again lays
in software and Internet research for the specific failure. It may
turn out that the only way to render your DVD player
compatible with a new type of copy protection is to update the
DVD drive firmware. If an update isn’t available for your
particular model, you can end up out of luck when it comes to
playing certain discs from certain studios after a particular date.
Drive vibrates, noisy? Does the drive cause the whole laptop to
tremble when it spins up? High speed drives will vibrate like
crazy if a disc is off balance, either because it was chucked up
wrong on the spindle, or because the disc itself has some
Plays
movies and
music?
Drive
vibrates,
noisy?
DVD/CD Playback and Record
164
weighting problem. Aside from obvious physical flaws (like the
dog or the kid took a bite out of the edge of the disc) a
misapplied label can create an unbalanced disc. Try ejecting and
reinserting the disc, but don’t keep running a disc in a drive if it
vibrates badly. The disc could end up damaging the drive (discs
have been known to shatter at high speeds) and it doesn't do the
other components in your system any good to be vibrated, which
can lead to connections working apart or worse. Your operating
system may give you an option to run the drive at lower speed,
usually in the interest of quieter operation. If the problem only
occurs with some discs, you can blame the discs. Otherwise,
consider an external USB drive replacement, and save the
internal drive for emergency use while traveling.
Burner problem? Does your problem involve recording CDs or
DVDs? Recording problems are largely independent of reading
and playback problems. The drive uses a different wavelength
laser and much higher power when recording, and the recording
media is often at the heart of recording problems. We
concentrate on problems that are caused by hardware or
software failure going forward, but keep in mind if you’re trying
to copy discs that recording may fail due to various copy
protection schemes.
Boots disc? Does your system refuse to boot known good boot
discs, like operating systems or purpose made virus recovery
discs? Don’t assume a disc is good because it’s supposed to be,
try booting it in another system. Next try setting the boot
sequence in CMOS Setup to boot to the CD or DVD first. This
shouldn't really be necessary if the hard drive is brand new or
has been wiped out, but can fix the problem if the installed
operating system is corrupted. If you’re using an external USB
drive to boot a known good disc and CMOS Setup lets you select
an external USB boot device but it still doesn’t work, it may only
work with a JumpDrive. Some high speed external drives take
too long to spin up a disc, and fail to report to the BIOS that
there's a bootable disc present before the BIOS gives up.
ID recorder, detect disc? Does the recording software installed
on the laptop see the burner and correctly identify it? Get the
latest version of the software from the third party web site. The
fact that the software was packaged with your drive when you
bought it doesn't necessarily mean it's up-to-date for your
particular model or the operating system release you're running.
Burner
problem?
Boots
disc?
ID
recorder,
detect
disc?
The Laptop Repair Workbook
165
Some known incompatibilities exist with virus software, which
will prompt you to download patches. You may find, through the
website of your laptop manufacturer or through the website of
the third party software vendor, that your DVD/CD recorder
requires a firmware update to operate with some recent
operating system or recording software release that you’ve been
automatically updated to use.
Does the recorder software detect that a recordable disc is in the
drive? The most common error when using cheap discs sold
without any labeling is mounting them in the drive tray upside
down. You can try turning it over, or if there are numbers
printed around the spindle hole in the center of the disc, the disc
is upside up when you can read them. Try cleaning the disc. It
may be bad, even if it looks perfectly good to the eye with no
scratches, fingerprints, etc. Failure rates can run as high as 20%
or more with cheap discs that have been sitting around for a
while on a spindle. Make sure the disc type you purchased is
compatible with your recorder, even if it means trying a more
expensive brand the manufacturer recommends.
Starts recording process then fails? Note that this renders the
"write only" or "R" as in CDR or DVDR media useless. The first
thing to check is if the drive successfully records discs to
completion at a lower speed, starting with the lowest speed
possible. If your recorder works at lower record speeds, the
recordable media you have may not be certified for the higher
speed, or it may just not work at the higher speed in your
recorder. You may also be suffering from a buffer underrun,
where the recorder runs out of data to write to the disc and fails.
In today's era of even the slowest hardware being pretty fast,
this is usually due to other tasks overtaxing your resources, or a
poorly planned record session. Try defragging the hard drive
before you record discs, and if the defrag utility keeps restarting,
it's usually a sign that some other task is competing with it for
the hard drive's attention. If you’re running on battery, try
recording with the AC adapter plugged in, as the battery may not
be able to continually source sufficient power to get through a
recording cycle.
Sole task? Close all other tasks so that the recording process is
the only job your laptop is working on. Get offline, turning off
your wireless connection or unplugging your connection to the
high speed modem or router. Other tasks can include work you
Starts
recording
process then
fails?
Sole
task?
DVD/CD Playback and Record
166
are doing in another program, as well as background tasks, like
virus shield programs and fax/phone software. There are
various 3rd party software packages capable of controlling
background tasks, but you can usually get by with Crtl-Alt-Del
and the Windows Task List, once you get a feel for which tasks
are superfluous to what you're doing. If the recording process
won't go through even at slow speed, it's possible that all of the
media you've tried writing is either bad or not suited for the
recorder you are using. Otherwise, the failure is likely due to the
hardware. The recording laser may have failed or may not be
generating enough power (you can try cleaning the lens) or the
speed regulation for the drive may poor. As long as it reads discs
correctly, it’s much cheaper and simpler to replace it with an
external USB burner than to replace the internal drive for what
may still turn out to be an esoteric software problem.
Disc play in other drives? Does the disc record properly, read or
play fine in the drive you recorded it in, but fail to play in other
computer drives or in consumer devices, such as stereos and
DVD players? The rewriteable media often fails completely in
read-only drives, like standard CD ROM drives or DVD set-top
boxes. Check with the manufacturer’s specifications for the
target device, the device you want to read the recorded disc in,
to make sure you are using a compatible media and format.
There are a sickening number of official formats and variations
for recordable CDs and DVDs and many of them aren't
supported by commercial playback devices, and never will be.
The rule of thumb for recording data discs that will be readable
in the maximum number of other computers is to use the writeonce,
CDR or DVD-R media.
Music CDs that you want to play in a stereo must be recorded on
CDR, not CDRW, and the burner software must be set to record
them in the CD-DA (Redbook) format. Writing a bunch of .wav
files to a CD, even at the proper sampling frequency and in
stereo, will not result in a CD that's playable in a stereo. It's the
format that counts. You don't have to buy the more expensive
CDR blanks labeled "CD Audio" blanks or the like, these are only
required for dedicated (non PC connected) CDR devices. DVD
players usually support multiple media types, but you need to
check the documentation for the final word.
Disc
plays in other
drive?
167
Volume
up and sound
audible?
Do music
CD’s play?
DVD/CD
chart
Yes
Voice-in
problem?
Poor
recording
quality?
Mixer
muted,
driver?
Reseat mic cord
in, jack, test mic.
Check driver, USB
mic
Enable
microphone in
mixer, reinstall
driver
Yes
Yes No
No
Yes
Cables
and hardware
quality?
Set sampling
rate 44 Khz or
higher. Check
source quality
Move system to check
for interference. Upgrade
sound components
Yes
Internet Yes No
sound
problem?
No
Game
problem?
Player
site requires
installed?
Follow links
from website to
download
player
No
No
Yes
Yes
No
Yes
Problem not
identified,
likely
software
May require
3-D setup, better
speakers. DOS
emulation for old
games
External
volume up,
connex?
No
External
speakers?
Yes
USB
Speakers?
Download latest
driver from Internet.
Check on different
USB port and
computer
No
OS see
sound
device?
Check with
headphones.
Search for hidden
volume controls
Yes
Check Modem and
Wireless diagnostics for
slow Internet connection
Yes
No
Yes
Turn up.
Check jacks
No
Enable in
Control Panel
No
Reinstall driver,
hardware failure
No
WiFi,
network,
modem
OK?
No Yes
When sound
failure coincides
with Ethernet,
WiFi, or modem
failure, I/O
daughter card
issue
Troubleshooting
Sound
OS
sounds?
Yes
No
Troubleshooting Sound
168
The Laptop Repair Workbook
169
Volume up and sound audible? Check any external volume
controls first, usually on the side or front edge of the laptop.
We’ll come back to the volume being up again, but if you aren’t
getting audible sound out of your laptop, the first thing to check
that the sound isn’t muted by a checkbox on the volume control
and that the slider isn’t all the way at the bottom. The basic
volume control is normally present in the system tray at the
bottom right of the screen, with a little speaker as the icon. If
you can’t see it on a Windows system, try expanding the tray
menu by clicking the left arrow in the tray, and be patient if the
laptop is still booting. You can always get to the basic volume
control through Windows Control Panel, and you can also
change the settings there to add the control to the system tray.
WiFi, network, modem OK? Many laptop manufacturers
combine all of the I/O functions on a separate daughter card
that rides on the motherboard. The daughter card usually
includes the WiFi transceiver, the 100/1000BaseT Ethernet
adapter and the dial-up modem, along with the sound system
hardware. If you lose any of these capabilities at the same time
that you lose your sound, odds are the daughter card has backed
out of the connector to the motherboard or simply failed. Do
your research on the Internet to establish that your laptop really
does have an I/O daughter card before breaking the laptop open.
Make sure you find a photo illustrated guide for replacing your
model’s daughter card online if the manufacturer doesn’t
provide a manual.
External speakers? The volume control on speakers usually
serves as an on/off as well. Some speakers may be powered by
batteries rather than a transformer or USB connection, so
double check that you don't have speakers with dead batteries. If
the speakers aren’t connected to the laptop by a USB port, they
aren’t drawing amplification power from the laptop and must be
getting it from a transformer or batteries.
If your speakers are connected through a standard stereo jack,
you can plug in a simple headphone to see if any sound is
coming out of the jack, just don’t have them on your head in
case the sound is too loud. If you are using external speakers
from choice rather than necessity, disconnect the external
speakers and try troubleshooting with the built-in laptop
speakers first. Speakers that connect directly to a stereo jack on
the laptop (little circular port) are running on the built-in sound
WiFi,
network,
modem
OK?
External
speakers?
Volume
up and sound
audible?
Troubleshooting Sound
170
card. Speakers connected through just the USB port or through
a PC card are running on their own sound device.
External volume up, connex? Laptops come equipped with an
external volume control, which is handy for turning the volume
up or down without having to stop what you are doing and
access the control in Windows. On newer laptops, this control
may be digital and integrated with the software volume, so the
two don’t contradict each other. But some laptops used a
hardwired volume dial that can turn the sound completely off,
independently of the software setting. If the dial is off, nothing
you do in software will induce the laptop to produce sound. It’s
also a good time to check that the speaker stereo jack or USB
connection is firmly in place.
USB speakers? Make sure you have the latest driver for your
operating system version downloaded from the Internet and
installed. Remember that USB speakers are really combining a
simple USB sound card and speakers, so the software is critical.
If the Windows Device Manager doesn’t report any problem
with the USB sound driver, everything is connected properly, all
the volume controls in software and hardware are up and not
muted, and you still can’t get sound, either the USB port or the
USB speakers are bad. Try them on another USB port and
another computer before giving up on them.
OS see sound device? If the operating system doesn’t see the
built-in sound device, you can try reinstalling the latest driver,
but unless the original driver was corrupted, it’s unlikely the
problem. If Device Manager reports a hardware problem, odds
are the built-in sound has failed. Unless the sound functionality
is on an independent daughter card in the laptop, as determined
from your owner’s manual or a little Internet research on your
exact model, don’t even think about replacing it. The cost
effective solution is to add USB speakers or a more complex USB
or PC card sound device to the laptop.
If you can’t get sound through the internal laptop speakers, plug
in external headphones just to make sure that the speaker wires
inside the laptop haven’t broken. This problem is more common
with laptops that feature the speakers in the lid, under or
alongside the screen. But software controls remain the #1
problem for laptop sound problems. Aside from the primary
volume control often found in your system tray, there may be
External
volume up,
connex?
USB
Speakers?
OS see
sound
device?
The Laptop Repair Workbook
171
various other mixer panels and volume adjustments offered in
other applications using sound. One of these can cause a
complete absence of sound if the "mute" box is checked.
Do music CDs play? Does your sound system work properly with
everything except music CDs? If you do have USB speakers, your
DVD/CD player and your laptop motherboard must support
Digital Audio Extraction (DAE) for the digital stream to be fed to
the speakers. Without DAE, music CDs are not digitally
processed by the laptop, only amplified. So if you have an older
laptop and the sound card functions for everything except for
music CDs, the problem is related to the player, not to the sound
system. Check under the properties tab for the DVD/CD player
and change the setting for “Enable digital CD audio” as a test.
One hint that CDs are being played digitally is that the CD drive
may spin up and down while playing music, rather than staying
spun up at it’s slowest and quietest speed. Some people disable
digital CD audio for that reason, if the laptop supports the old
fashioned hard wired CD connection as well.
OS sounds? In Windows, the basic "Sounds" menu is found in
Control Panel. Sound events that have little speakers next to
them are enabled. Enable sounds for some actions that you
recognize (like "exit program" or "minimize") and see if your
speakers work now. Note that Windows sounds don't need to be
enabled for music CDs, videos, Internet phone or radio or games
to be heard. We’re just working through the possible problems
by process of elimination.
Voice-in problem? Is your problem with the microphone? Check
that you have the mic in the proper port. If you are doing speech
recognition, you should purchase a quality noise cancellation
mic, and go through the calibration and testing procedures your
software will support. If you still have a sound quality problem,
you may need to bypass your built-in sound card with a USB
microphone or plug in PC card sound.
Mixer muted, driver? Make sure that the microphone isn't
muted in the software mixer panel. Check Device Manager for
any problems, and if there are any warnings ("!", "?", "i") next to
the sound card, reinstall the driver. If the mute box is unchecked
and there isn't a driver problem, try the microphone on another
audio device and replace it if it's bad. The female audio
connector or jack for the mic in laptops can easily get broken or
Do music
CD’s play?
OS
sounds?
Voice-in
problem?
Mixer
muted,
driver?
Troubleshooting Sound
172
deformed if the microphone cord gets pulled on or kicked, and
likewise, the conductors in the cord can be frayed or broken.
Poor recording quality? If your recordings sound poor when you
play them back, check your patch cables and jacks for loose
connections. Some cables are extremely low quality, so if you
plan to do a lot of audio work, start by getting a good set. Make
sure that your mixer settings (the software mixer panel) aren't
uneven, muting the channels you want, or simply running an
unexpected mix. Try muting any channels that aren’t
contributing to the recording, since they may be introducing
white noise. For example, if you’re recording sound from the
CD, mute the mic. Don't neglect to check the quality of the audio
source - if you're trying to record from a hissing tape or a
scratchy recording, the sound card does not automatically filter
out the unwanted noise. High end recording software does give
you the option to clean up recordings, but usually after the
recording process is complete.
Cables and hardware quality? Laptops aren’t marketed for their
ability to do studio quality sound recording, and there’s a reason
for that. For music recording, make sure the sampling rate is set
to 44 KHz, audio CD quality. Interference is always a possibility,
especially if it takes the form of loud ticking or hum. Try moving
the system to another location if you're recording near any
electrical motors or other possible sources of low frequency
interference. True audiophiles spend hundreds of dollars (or
more) on audio patch cables that could be worn as jewelry, given
the rare metals the wiring is drawn from. They also spend
hundreds of dollars on replacement USB or plug in PC sound
cards for their laptops, and although these are marketed more
for their playback rather than recording quality, you get what
you pay for.
Internet sound problem? Is your problem related to playing
Internet radio or other web based audio applications? If the
quality stinks, it's probably your connection to the Internet. If
you have a broadband (cable, DSL) connection and the quality
still stinks, it could be the ISP or website is overloaded, so try
again later on. It could also be that you're running too many
tasks at the same time or the hard drive is near full and virtual
memory is thrashing it. Check the hard drive and motherboard
diagnostics for potential performance issues.
Poor
recording
quality?
Internet
sound
problem?
Cables
and hardware
quality?
The Laptop Repair Workbook
173
Player site requires installed? Most Internet audio applications
use a third party player, such as Real Audio. These players may
or may not come preinstalled on your notebook, depending on
the manufacturer. If you get no Internet sound at all, but all
other audio applications work, either your OS and the player
software aren't getting along or you’re missing a required
CODEC. Try reinstalling the latest version of the software used
on the particular website or research the problem on Google for
your specific setup. Websites with audio content usually link to
the player site from which you can download a free copy of the
player, though you may have to register and reboot when it's
done downloading.
Game problem? There are a number of reasons the sound
quality on your system may not match your experience on
somebody else's laptop. The sound card or motherboard audio
in your laptop may be lower quality. The same goes for the
speakers, whether internal or external. You could also be picking
up interference on the speaker wires, so try routing them away
from the AC power adapter and any peripheral device
transformers. Laptop gaming sound will never compare well
with PC gaming sound unless you’ve purchased a USB or PC
card external sound adapter that supports 5.1 or 7.1 surround
sound and scattering the required speakers around the room.
Is the audio problem with an older game? Very old games
require obsolete sound card compatibility. The default settings
of IRQ=5, Address=220, DMA=5 are usually required, since the
game communicated directly with the sound card. You may be
able to force your sound card to these settings, or, when
supported by the driver, you might get by with emulating them
under the sound card setup in Device Manager. There's also the
possibility, if your game actually exits and runs in DOS mode,
that you need to have the proper drivers installed in the DOS
Startup files, config.sys and autoexec.bat. This won’t be possible
at all in newer Windows versions without a full DOS emulator
installed.
Player
site requires
installed?
Game
problem?
Troubleshooting Sound
174
175
Laptop
works on
network?
New
router or hub
on LAN?
Random
problems?
No Yes
Check crossover
(X) port wiring
Link
light lit?
Physical
layer (cables,
devices)
Copied
network
config?
No Yes
No Yes
Clone setup
from good
workstation
Device
Manager
problem?
Yes No
No
Tried
known good
cable?
Swap cable
or check pairs,
ends
Yes
No
Laptop
works at new
location?
In-wall cabling
failure, limits, or
hub port
Yes
Yes
Reboot,
improper software
configuration or
bad network
adapter
No
User settings,
software limits,
permissions,
security
Wiggled
cable?
No Yes
Check if port
loose in laptop
Yes
Within
physical layer
limits?
Add repeaters,
re-route cables
Tried
different
port?
No
Yes No
If connection
stable on new
port, prior port
is failing
No
Fails on
traffic, # of
users?
Yes
Swap hub
for switch,
check server
utilization
Flaky
off network
also?
Motherboard
CPU/RAM
chart
Yes No
Yes
Direct
to router or
hub?
Bypass any
intermediate
network hardware,
patch in
No
Yes
Work
external
adapter?
No
Use USB, PC card or
new daughter card
Most likely
software conflicts,
virus
Problem is unlikely
network hardware if
only this laptop has
intermittent failures.
Try eliminating all other
non-essential software
tasks for testing
purposes.
No Yes
Wired LAN
Troubleshooting
If hardware
fails OS
diagnostic,
replace
daughter card
or use USB
adapter
WiFi,
modem,
audio?
Yes
Failure with
WiFi, sound or
modem, I/O card
suspect
No
Wired LAN Troubleshooting
176
The Laptop Repair Workbook
177
Laptop works on network? The laptop troubleshooting
procedures on the chart are pretty evenly divided between the
failure to get on the network (to the left) and the failure to stay
on the network (to the right). If the laptop can access any
network resources, servers, other workstations when the
networking cable with the RJ-45 connector is installed, it’s
getting on the network. Note that some versions of Windows
networking software display "remembered" resources, even
when the laptop can't access them, so you'll need to click on a
given resource and refresh to see if it's really available. If your
laptop gets on the network and stays on the network without any
glitches, but you can’t access certain resources or applications,
the problem is with your software settings, permissions, group
memberships or security.
WiFi, modem, audio? If you lose your dial-up modem,
integrated sound, or the ability to connect to a public WiFi
network at the same time as you lose your wired Ethernet
functionality, the problem almost certainly lies with a
communications or I/O daughter board. Check the laptop
manufacturer’s documentation or research on the Internet
before tearing the laptop apart to reseat the daughter board,
inspect it for damage, or replace it if necessary. Somebody
tripping over a cord or trying to walk off with the laptop still
cabled to the network or the telephone jack can damage the
daughter board or the motherboard connector if the ports are
mounted on the board edge.
New router or hub on LAN? Is the laptop the first workstation
on a new router or hub, being stacked or chained to existing
hub(s) in an office network? When connecting hubs or switches
with twisted pair (RJ-45 connector) cabling, whether 10BaseT ,
100BaseT or Gigabyte (1000BaseT), make sure that you either
connect to an "X" port (uplink port), or use a special crossover
cable. A crossover cable, unlike a straight through cable,
connects pins 1 and 2 on one end to 3 and 6 on the other end
and vice versa for 10BaseT and 100BaseT, and also connects
pins 4 and 5 with 7 and 8 on the other end and vice versa for
1000BaseT. When building crossover cables, you must use a
twisted pair for each named pair for noise protection. If you do
have an X or uplink port, you normally see that it is connected to
an adjacent port by a line or other symbol. You can only use one
or the other, since they are using the same physical circuitry,
with the X port making the pair reversal. Bad hubs and routers
Laptop
works on
network?
WiFi,
modem,
audio?
New
router or hub
on LAN?
Wired LAN Troubleshooting
178
or bad ports on hubs and routers are as common as bad network
adapters. Routers and hubs also have a power transformer that
needs to be plugged into a live outlet.
Link light lit? Most laptops have LEDs right next to the RJ-45
port to show the status of the link and network activity (traffic).
Green is good for a link, a blinking LED next to it indicates
traffic. No link light indicates there's a break in your physical
layer. Check the physical connectors at all points on your
network in the failed path, and make sure that you are within all
of the limits for your physical layer in terms of number of
workstations and distances. Swap the laptop's networking cable
to another port on the router or hub and see if it works.
Copied network config? If all you’re trying to do is connect
directly to a high speed Internet router in your home, the
software supplied by the phone or cable company should take
care of any networking settings for you. If your laptop is the only
computer getting attached to a new broadband Internet
modem/router, transfer to the wireless troubleshooting
flowchart and start with the “Works on Ethernet port?” symbol,
following the “No” outcome.
If you’re trying to connect to an office network, clone the
software configuration from another workstation on the network
(everything but the unique portion of the IP address, if you're
set up for TCP/IP). It's easy to make a mistake with which
protocol should be the default or with the spelling of a
Workgroup, etc. At an active workstation, go through every
option in the network setup and print screen every page and sub
page that comes up. Keep it around for future reference when
you run into networking problems with a similar workstation. If
this is the first workstation on the network, or the second on a
peer-to-peer, go with the defaults and make use of the operating
system's built-in troubleshooter, at least in Windows versions.
After making changes, go through a full reboot.
Device Manager problem? Does the Device Manager see the
network adapter and report it to be working properly? If not, try
reinstalling the driver and rebooting. In Windows, start by
deleting the existing network adapter in Device Manager. If
Windows doesn’t find the adapter and reinstall a driver when
you reboot, it’s probably failed. Check that the CMOS settings
are restored to their defaults. If the network adapter is
Link
light lit?
Copied
network
config?
Device
Manager
problem?
The Laptop Repair Workbook
179
integrated on a replaceable daughter board that you can get
cheaply, it might be worth opening up the laptop, but otherwise,
replace it with a USB or PC card network adapter.
Tried known good cable? Even if the link light is lit, it doesn't
mean your cable is capable of carrying network traffic. An
incredible number of techs make these cables wrong out of sheer
laziness or ignorance. Don't say, "But it's a new cable!" Four
conductors are actually used for normal implementations
10BaseT and 100BaseT, and the wiring is straight through, 1-1,
2-2, 3-3, 6-6. Pins 1 and 2 and pins 3 and 6 must each use a
twisted pair, or the longer runs will fail and shorter runs will act
unpredictably. Gigabit, or 1000BaseT cables, use all 4 pairs,
with 4-4, 5-5 adding one pair and 7-7, 8-8 adding the other. In
addition, visually inspect connectors to make sure they are solid
and wired properly (shared pairs listed above). Squint into the
transparent connector and try to take note of the color coding
for each pin. Then go look at the other end of the cable and
make sure that the color coding is the same, AND that a pair (i.e,
blue, blue stripe) is used for the pair 1 and 2, 3 and 6, etc.
Laptop works at new location? Take the laptop to another
workstation location and steal the networking cable out of that
computer. If you get right on the network, that tells you that the
physical link to the location where it failed is bad. That could be
the patch cable, the in-wall wiring, or the port on the hub it
connects to. If it doesn't work at the new location, this tells you
the problem is either the network adapter or the software
configuration. If there's a USB network adapter floating around
the office you can try, by all means give it a shot, but the
software settings are more often the culprit. Make sure the
driver is up-to-date and the correct version for the OS, make
sure that you have cloned all the settings (except the machine
name or final IP address) from a working machine, and try
going through the OS troubleshooting steps.
Random problems? Are your network access problems of a
random or intermittent nature? Check for loose connectors. It's
very easy to install a RJ-45 connector improperly or fail to crimp
it tightly enough to hold to the cable such that it loosens up with
just a minor physical movement. The problem might also be
interference somewhere in the cable run. Make sure the cable
isn’t running directly over your ham radio set or other strong RF
emitters. You could be experiencing software conflicts with
Tried
known good
cable?
Laptop
works at new
location?
Random
problems?
Wired LAN Troubleshooting
180
other processes on the laptop. You can try eliminating all tasks
except the minimal network configuration and do some large file
movements to see if the hardware layer is solid. In an office
environment, occasional problems are often due to loading of
the network, a traffic jam.
Wiggled cable? Try wiggling the network cable very close to the
laptop port while keeping an eye on the link LED. If the link
LED winks when you’re moving the cable and is steady
otherwise (make sure you don’t mistake a traffic LED for a link
LED as the traffic LED’s are always winking), either the
connector on the cable end or the port in the laptop has a loose
connection. If you’re lucky, it’s the cable. If not, you can try to
resolder the RJ-45 connector inside the laptop if you know what
you’re doing, but it’s safer to just buy a USB network adapter
and use that instead. The killer for networking ports on laptops
is when the user forgets the cable is connected and tries to walk
away with the laptop.
Within physical layer limits? Are you within the physical layer
limits for your network? This applies to both wired and wireless
networks. Don't go by the number in the IEEE standard, use the
limit in the router, hub, switch or repeater documentation. Be
aware that the distance limitations are based on a normal
operating environment with the proper cabling or antennas
installed. If your cables are made wrong, routed poorly, or are
low quality, the limits will be reduced. Rerouting cables, adding
repeaters (amplifiers) or eliminating sources of interference can
increase the reach of your network.
Tried different port? There's no rule that says router and hub
ports should have to fail all at same time, so try a different port,
even if you have to disconnect somebody else for a minute. It
could also be that the cable end plugged into the hub wasn't
crimped on as tightly as it could have been, causing the
performance of the link to be dependent on the exact position of
the cable, an unacceptable situation.
Fails on traffic, # of users? Does the problem, be it lost
connections, slow performance or anything else, occur during
periods when network traffic is high or a large number of users
are logged on? There are many reasons a network can bog down
or have trouble in high traffic or high user count situations,
including the natural limitations of the technologies being used.
Wiggled
cable?
Within
physical layer
limits?
Tried
different
port?
Fails on
traffic, # of
users?
The Laptop Repair Workbook
181
In general, if you are using a passive hub in a business or
educational environment, you can greatly increase your network
performance during high traffic periods by swapping the hub for
an active switch. Also, if you are running a hybrid LAN, with a
mix of 10BaseT and 100BaseT and 1000BaseT adapters, you
should think about upgrading them all to 1000BaseT, providing
the cable plant is all Cat 5 and you haven't scavenged the
previously unused pairs for some kludge.
Flaky off network also? If your laptop suffers from random lockups,
data corruption or poor performance when you aren’t
connected to the network, you’ve started troubleshooting in the
wrong place. Start with motherboard, CPU and RAM failure if
the problem is lock-ups, but you should follow through the
overheating and hard drive troubleshooting flowcharts as well.
Direct to router or hub? If you’re in a home or small business
networking environment, bypass any repeaters and hubs and
don’t use a port replicator or docking station until you solve the
problem. In a larger networking environment, you might try
sneaking the laptop into the wiring closet and patching it
directly into the hub with a short cable if all else fails. Check for
physical cable damage on your patch cable. The sheathing on the
Cat 5 cables is thin and the inner conductors can be easily
broken if the cable is stretched or crimped.
Work external adapter? If bypassing the laptop’s built-in
networking adapter with a USB or PC card networking adapter
cures the random drops, just keep using the replacement
adapter. If it doesn’t cure the problem, either you have some
other hardware issue that only manifests itself when you’re
running certain networking tasks, or the problem is of the
malware/software corruption variety.
Flaky
off network
also?
Direct
to router or
hub?
Work
external
adapter?
Wired LAN Troubleshooting
182
183
Keyboard,
Pointer and
USB
Pointer
problem?
PS/2
mouse?
Buttons
working?
Check function
assignments,
hardware
No
Yes
No Yes
Bad
touchpad
control?
Software
settings or
practice.
Yes
Yes
No
Check legacy
port enabled,
clean or replace
mouse
Device
Manager
OK?
Tried new
driver?
Try device solo.
Re-install driver with
single device
attached Cable
swapped,
port?
Swap cable,
swap USB port
Peripheral device
problem, hardware or
peripheral software, try
reinstall, reboot
No
Yes
Yes
No
Yes
All USB
2.0?
Some
peripherals
require USB 2.0
or 3.0 for speed,
higher power
Connect direct
to laptop USB
Use other port,
use USB hub or
PC card, resolder
Dead
touchpad?
Check enabled in
OS, replace or use
USB pointer
IBM pointer or
trackball, check
internal connection,
replace or bypass
No
Hub,
dock station,
replicator?
USB port
loose?
Keyboard
problem?
No
Yes
No
No Total
failure?
Remove
keyboard, check
ribbon connector.
Try USB or
external PS/2
Yes
Dead or
trick key?
Remove key,
check for
blockage
Yes
Repairable,
save clip if
possible
Key fell
off?
Yes
Hot, fails
after time?
Overheating
Chart
Yes
Software settings issue. See
hardware profiles for setting
special key functions, repeat rate,
defaults for lock keys
No
No
Yes No
No
No Yes
Yes No
No
USB
hardware
failure
Yes
Keyboard, Pointer and USB
184
The Laptop Repair Workbook
185
Pointer problem? Is the problem with your touchpad, IBM style
pointer, trackball, mouse or graphics tablet? The touchpad is the
pointing device for the vast majority of laptops being sold today.
If your problem is with the keyboard, any USB devices or
peripherals, continue to the right.
Buttons working? Do the buttons for your touchpad, on your
mouse, or in the palm rest area if you have an IBM style
keyboard pointer, select or activate the text or controls on
screen? If neither button works, either the software assignments
for the button actions are set to do something other than you
assume, or there’s a hardware problem. Find the controls for the
button functions for your pointer, usually accessed through a
system tray icon in Windows and always available through
Control Panel. If the buttons are enabled and set to do the
normal functions, shut down and check CMOS Setup on reboot
to make sure they aren’t disabled there. If everything is correct
in software and they don’t work, it’s likely that the cable to the
touchpad or pointer has come undone and you’ll have to remove
the keyboard if you want to check it. Alternatively, you can
switch to a USB pointing device, like a mouse or tablet.
If one button works and the other doesn’t, try reversing the
assignments for the buttons, changing from left-handed to righthanded,
and see if the functioning button changes. If it does, the
problem is that the software assignments for the button that
doesn’t work simply don’t match the action you thought it
would. However, if the functioning button doesn’t change, it’s a
genuine hardware failure of that button, which you’d have to
replace if you really need it and don’t want to work with a USB
replacement pointer or mouse.
Bad touchpad control? Nearly all problems with controlling the
pointer through the touchpad are due to the software settings. If
you keep launching applications you don’t intend to when trying
to move the pointer on screen, or if you get crazy scrolling or
system prompts for actions you aren’t trying to carry out, odds
are the touchpad is set up for various shortcuts. Touchpads offer
a serious array of shortcuts through touching the corners of the
pad, moving your finger along the side, tapping, any specially
recognized action the programmers could think of. You can turn
off all these enhanced functions in the touchpad controls so it
does nothing but move the screen pointer along with your
Pointer
problem?
Buttons
working?
Bad
touchpad
control?
Keyboard, Pointer and USB
186
fingertip, or you can familiarize yourself with the controls that
appear useful and keep them.
Dead touchpad? If you get no action at all from the touchpad,
the first thing to do is to plug in a USB mouse so you can
navigate through the operating system without having to resort
to the <Tab>, spacebar and arrow keys. Check the touchpad
properties in Windows, first making sure that it is enabled, and
then checking the hardware profile to see if Windows reports
that it is operating properly. If Windows sees a problem, power
down and restart the laptop, then enter CMOS Setup and make
sure the touchpad hasn’t been disabled. Finally, check the
manufacturer’s website to see if an updated driver is available. If
everything is as correct as you can make it in software, it’s
possible that the touchpad itself has failed or the connector has
worked loose thanks to all the vibrations from typing. If you can
find a good illustrated guide specific to your model for removing
the keyboard and gaining access to the touchpad, you can check
the connections and decide if you want to try replacing it.
PS/2 mouse? We’re including any type of mouse port mouse
here, one that plugs into a little circular port which is normally
green, as opposed to USB. If the pointer doesn’t move on screen
and the buttons don’t work, check the connection and make sure
it’s enabled in CMOS Setup. If it still does nothing, try another
mouse. If the pointer works in one direction only, horizontal or
vertical, the mouse just needs the lint cleaned off the little roller
bars inside. If the buttons don’t work, check the software
assignments for the buttons, and if they are correct, replace the
mouse.
If you have an IBM style pointer or a trackball and you’re having
problems with the buttons, go back up to the first decision
diamond in this tree and read the troubleshooting for the “No”
answer to “Buttons clicking?” If the little foam cover on the
pointer is loose, you can get a bag full of replacements online. If
the pointer wanders off in one direction when you’re not
touching it, check if there’s a recalibration option included with
the pointer software. If not, you can try over working it in the
opposite direction to see if it was just a little sprung, but it is a
failure mode with pointers and joysticks, and it may have to be
replaced.
Dead
touchpad?
PS/2
mouse?
The Laptop Repair Workbook
187
Keyboard problem? The diagnostic path to the right is for
problems with built-in laptop keyboard. Any problems with an
externally attached keyboard, continue down to USB
troubleshooting, or if it’s a PS/2 keyboard, replace the thing for
a couple bucks!
Total failure? Is the keyboard completely useless, to the point
that you can’t even access CMOS Setup before the operating
system launches? The first thing to do is to try a cheap external
USB keyboard, just to find out if the problem is really your
integrated keyboard, or a laptop that is ignoring all user input. If
the laptop boots and the touchpad still works to navigate in the
operating system, either the keyboard connector has vibrated off
the motherboard, or you have a hardware failure. Since traveling
with an extra keyboard defeats the point of owning a laptop for
many people, it’s worth finding a good photo illustrated guide
online to replacing the keyboard for your exact model, opening
up the laptop and redoing the keyboard connector. At that time,
you can decide if you want to gamble on a replacement keyboard
membrane if redoing the connector doesn’t work. If an external
PS/2 keyboard works on the special keyboard port, the keyboard
controller on the motherboard is good, but if only a USB
keyboard works, a replacement membrane is a real gamble.
Dead or trick key? Does a single key malfunction on a regular
basis, or all of the time? If it’s gotten to the point that you can’t
work with the integrated keyboard and always use a detached
USB or PS/2 keyboard, you have nothing to lose in prying off the
key and checking if it’s gunked up by hair, food crumbs or
anonymous gudge. Using a butter knife or a fine pair of needle
nose pliers, you should be able to unhook the plastic clip from
the key once you pry it up a little, rather than tearing it off and
hoping for the best. If the clip was being interfered with, the key
will work fine when you replace it. It’s an excruciatingly
frustrated job for the uninitiated because it involves working
blindly to re-catch the clip inside the key. If the key behavior
doesn’t change, the failure is in the domed membrane contact,
and the only cure is to replace the whole membrane, which you
buy (thankfully) with the keys attached. If you aren’t a touch
typer, you can download a software key remapper, which allows
you to change the functionality of keys. That way, if you’ve lost
your “A” key, you can change one of the top Function or special
Windows keys into the new “A” for when you use the laptop on
the road.
Keyboard
problem?
Total
failure?
Dead or
trick key?
Keyboard, Pointer and USB
188
Key fell off? A couple of the larger keys, including the space bar,
and sometimes the <shift> keys, <enter> and <backspace>, can
use metal wire spring clips. These aren’t as hard to replace as
individual keys, and you may even find them for sale
individually if you spend enough time searching the web for
parts for your exact model. All of the other keys are retained by
small plastic clips that hold the keys by inserting the clip ends in
tiny holes or channels under the key. There’s very little spring
force involved, the plastic has just enough strength to keep the
clip ends engaged with the key.
Sometimes a key falls off because a little foreign matter has
gotten underneath and eventually worked its way into the hole
or channel, releasing the end of the clip. The clip will be
undamaged, you just have to clean out the key, study the
latching mechanism to figure out how it’s supposed to go on,
and replace the key with a great deal of patience. However, if a
key is ripped off the keyboard and the plastic clip is damaged,
the odds of getting the key back on in a working state are much
reduced. Your best bet, rather than shopping for a replacement
clip, is shopping for a junk laptop from the same model family.
If you find one cheap, you can decide between trying to swap
keyboards (the junk laptop keyboard may have its own
problems), or scavenging a clip from it. You can also download a
software keyboard remapper as mentioned in the dead key
troubleshooting.
Hot, fails after time? The keyboard itself shouldn’t generate any
heat, so the problem is due to overheating below the keyboard
that’s coming right through. Since the keyboard takes up the
majority of the top surface area of the laptop, it’s not that
uncommon of a problem. You should start by researching
complaints about overheating with your model on the Internet
to see if it’s a “normal” problem and if there are any trick
solutions. Otherwise, see the troubleshooting flowchart for
overheating.
If you’re getting extra characters while you type, yet the key isn’t
physically sticking (what we’d call a trick key), the problem is
often in software, with the typomatic repeat control. You can try
changing the repeat rate settings for the keyboard in Windows
Control Panel, and sometimes there’s a hardware control in
CMOS Setup as well. But if it only happens with one key, and
cleaning doesn’t help, it could be the membrane is faulty or just
Key fell
off?
Hot, fails
after time?
The Laptop Repair Workbook
189
worn out. But try an external keyboard before jumping to
conclusions, just to make sure it isn’t a software setting.
Hub, dock station, replicator? Is the USB device you are having
trouble with plugged in through a USB hub, a docking station or
a port replicator? If so, connect it directly to a USB port on the
laptop and if it still doesn’t work, continue the troubleshooting
process to the right. If your USB ports on the laptop work fine,
but your powered USB hub, docking station or port replicator
doesn’t work, you may be dealing with bad hardware, or the
software may not be functioning properly. If the device is plugn-
play, and the operating system doesn’t require any third-party
software to be installed for it to operate, than the hardware itself
is probably at fault. If it does require software drivers, make sure
you’ve downloaded the latest version from the manufacturer of
the device on the Internet.
Device Manager OK? Windows Device Manager will list all of
the USB hardware the laptop recognizes, host controllers and
root hubs. Make sure to disconnect any external USB devices
before checking. Make sure that USB is enabled in CMOS Setup.
If there is a warning symbol, when you click on that USB device,
you may still see the message “This device is working properly”,
but go through the Windows troubleshooting anyway. Either the
driver software is corrupted or there’s a problem with the
hardware. In the advanced properties for the USB port in
Windows Device Manager, there may be an option to rollback
the driver to a previous version. This is always worth trying,
especially if the USB port stopped working after an automated
Windows update.
Tried new driver? You can try to delete the USB device in Device
Manager, shut down the laptop, and Windows should re-detect
it and install the driver again when the laptop reboots. If you did
locate a new driver for the USB ports on the manufacturer’s
website and it didn’t correct the Device Manager error, the
motherboard USB has likely failed. If the ports are reported
healthy in Device Manager until you connect an external USB
device, that external device must be bad.
As long as one USB port still works, you can use an inexpensive
external USB hub to attach multiple USB peripherals. You can
also purchase one of those poorly named PC cards for your
Hub,
dock station,
replicator?
Device
Manager
OK?
Tried new
driver?
Keyboard, Pointer and USB
190
laptop that will host a number of USB ports that bypass the
motherboard USB entirely.
All USB 2.0? Many newer peripherals require USB 2.0 to
function, especially high speed devices like external hard drives
and DVD recorders. While most USB devices can still operate in
a backwards compatible mode with USB 1.1, this functionality
will slowly go away as USB 1.1 ports disappear with obsolete
computers. USB 3.0 is just pushing into the market, but USB 3.0
devices should remain backward compatible with USB 2.0 for a
long time to come.
Some laptops came with a mix of USB 2.0 and USB 1.1 ports. If
you are having trouble with a high speed USB device, make sure
you are using it on a USB 2.0 port, and if you aren’t sure all of
your ports are 2.0 or which is which, just try the device on the
other ports. If you are getting write errors with an external hard
drive, or any time-out related errors with any USB device that
works intermittently, make sure that power management isn’t
cutting the USB power to the port. The USB Root Hubs in
Device Manager have a Power Management option, the default
setting for which in Windows is to allow Windows to turn off the
port to save power. Try changing the setting.
USB port loose? If the USB port feels loose in the laptop and you
are having problems with the devices connected, you should
stop using it. The solder connections may have broken or the
port itself may have been bent or the metal distorted from
somebody yanking or tripping over an attached USB cord. If you
have advanced soldering skills and you really need the port, you
can dissemble the laptop to resolder or replace it. But there are
so many other options, from adding an external USB hub on a
working USB port, to a docking station, port replicator or PC
card solution, that trying to fix the physical failure of a port isn’t
usually necessary.
Cable swapped, port? USB cables, like all cables, come in a
variety of qualities. The USB scheme is very simple, the four
conductor cable includes a signaling pair (the serial bus), a
power supply and a ground. But a poorly made cable or one
made for a USB device you purchased ten years ago and found
in a drawer may not be up to working with a high speed drive,
printer, etc. Never give up on a USB peripheral without trying it
with a USB cable rated for the speed of the device, ie, USB 2.0 or
All USB
2.0?
USB port
loose?
Cable
swapped,
port?
The Laptop Repair Workbook
191
USB 3.0 (also called High Speed). You should always try the
peripheral not only on multiple USB ports as well, but on
another laptop or PC with working USB ports.
USB is very solid technology, and the majority of the problems
you’ll have with USB peripherals are with the software that does
or doesn’t accompany them. Many USB devices are plug-n-play
with the newer versions of Windows, but that doesn’t mean they
will work with older versions of Windows without a special
driver download, if at all. You may also have to install special
drivers for your Linux or Mac OS system. Also, pay attention to
any error conditions displayed with LED’s on your USB
peripherals. You don’t want to call in a technician or start
replacing hardware when the problem is a printer paper jam, a
dead inkjet cartridge, or an external drive with a failed
transformer.
How to Get More Surveys on Google Opinion Rewards App? Ultimate Guide
How to Start a Blog to Make Money Online Ultimate Guide
1001 Ways to Make Money Online Home Free Fast No Scams
How to Earn Money Online Writing to Revenue Sharing Websites Ultimate Guide
How to Earn Money Online by PPC Pay Per Click Marketing Ultimate Guide
How to Earn Money Online Fiverr Services Support Ultimate Guide